OK,
this is what i get: [NIC entry, not the rest]
[EMAIL PROTECTED]:8:0: class=0x2020000 card=0x80f81043 chip=0x10508086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
I minimal install from 5.1 made from the ISO images from the FTP site. as in a basic
install using the /stand/sysinstall blah blah.
i'm not very good with installs as i have never really had much trouble before. should
i make a CD from some 'CURRENT' version? all
my hardware should be supported according to the HAREWARE.txt in the CD image i have
for 5.1.
[sorry about the email format. im using my thinkpad plagued by M$]
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Greg 'groggy'
Lehey
Sent: Wednesday, 24 September 2003 6:53 PM
To: Anthony Carmody
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: NIC card not showing up during 5.1 install
[Format recovered--see http://www.lemis.com/email/email-format.html]
Overlong lines.
On Wednesday, 24 September 2003 at 18:45:47 +1000, Anthony Carmody wrote:
> i am building a new server for a client and my hardware vendor
> changed my usual hardware profile to use an 800fsb ASUS Mainboard,
> it runs the Intel 865G chipset. I have tried installing 5.1 but it
> cannot see to onboard Ethernet and seems to get upset running the
> mouse when the XF86 server starts up for some reason.
>
> i have 2 bootable installer discs for 5.1 made from ISO images some
> months ago.
>
> I had a look at the current HARDWARE.TXT in the first disc and the
> network card is supported so it says"
>
> "Intel 82562-based Fast Ethernet NICs"
>
> when i get the prompt during installation to configure network
> connections i only get a sellection of four serial connections PPP &
> SLIP etc. I remember being given a choice of one NIC as well....
>
> so, does this mean it might be there somewhere? when i run a
> 'netstat -i' i cant see anything that looks like a NIC. Just serial
> ports etc. I assume this is only running interfaces, correct? what
> should i be looking for?
Do a minimal install, then run
# pciconf -vl
The output looks something like (showing NICs only):
[EMAIL PROTECTED]:12:0: class=0x020000 card=0x032010bd chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
class = network
subclass = ethernet
[EMAIL PROTECTED]:18:0: class=0x020000 card=0x764c1462 chip=0x30651106 rev=0x74
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
Show us what you see there. If you can identify the NIC in the
output, you don't need to show the rest.
Greg
--
When replying to this message, please copy the original recipients.
If you don't, I may ignore the reply or reply to the original recipients.
For more information, see http://www.lemis.com/questions.html
See complete headers for address and phone numbers
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
