Emelianov wrote:
Dear friends!
Please help me with my new equipment:
FreeBSD-5.4-RELEASE/AMD64
mobo Foxconn NF4UK8AA-8EKRS Socket-939 nForce4 U
RAM2x512Mb PC3200 (Dual Channel)
VGAPCI-Express 128Mb PowerColor R41A-PC3 (ATI Radeon X700 Pro,TV-Out,DVI)
NICInternal 1Gbps (nForce4)
Look the #dmesg | grep pci command:
8---
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pci0: memory at device 0.0 (no driver attached)
isab0: PCI-ISA bridge at device 1.0 on pci0
pci0: serial bus, SMBus at device 1.1 (no driver attached)
ohci0: OHCI (generic) USB controller mem 0xfebff000-0xfebf irq 22 at
device 2.0 on pci0
pci0: serial bus, USB at device 2.1 (no driver attached)
pcm0: nVidia nForce4 port 0xec00-0xecff,0xf000-0xf0ff mem
0xfebfd000-0xfebfdfff irq 20 at device 4.0 on pci0
atapci0: nVidia nForce4 UDMA133 controller port
0xe800-0xe80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: GENERIC ATA controller port
0xd400-0xd40f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 22 at device 7.0 on
pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
atapci2: GENERIC ATA controller port
0xc000-0xc00f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 21 at device 8.0 on
pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pcib1: ACPI PCI-PCI bridge at device 9.0 on pci0
pci1: ACPI PCI bus on pcib1
pci1: multimedia, video at device 8.0 (no driver attached)
pci1: multimedia at device 8.1 (no driver attached)
fwohci0: Lucent FW322/323 mem 0xfe9ff000-0xfe9f irq 19 at device 11.0 on
pci1
pci0: bridge at device 10.0 (no driver attached)
pcib2: ACPI PCI-PCI bridge at device 11.0 on pci0
pci2: ACPI PCI bus on pcib2
pcib3: ACPI PCI-PCI bridge at device 12.0 on pci0
pci3: ACPI PCI bus on pcib3
pcib4: ACPI PCI-PCI bridge at device 13.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge at device 14.0 on pci0
pci5: ACPI PCI bus on pcib5
pci5: display, VGA at device 0.0 (no driver attached)
pci5: display at device 0.1 (no driver attached)
8---
Wich kind of kernel options I need include to my config?
Or may be some modules need to load at boot time?
I'm already try to load the radeon.ko but also can't see any
positive result. (See the 'pci5' lines)
And more... What do you think about NIC on this m/board?
Wich options/modules/third party programms?
And the #kldstat command output for your attention:
8---
Id Refs AddressSize Name
1 11 0x8010 7cf120 kernel
21 0x808d 5ef0 snd_ich.ko
32 0x808d6000 2cb00sound.ko
41 0x80903000 28218radeon.ko
54 0x8092c000 8970 agp.ko
61 0xa794d000 4add tdfx.ko
71 0xa7952000 1090cr128.ko
8---
Kernel is GENERIC now.
Thanks in advance.
Get rid of r128.ko, you would use radeon.ko but the x700 has only 2d now
support so you could drop radeon.ko also. tdfx.ko if for voodoo cards,
drop that too. By the way the 9800s(IIRC) and newer show as 2 devices
on one card.
Its sad, but no one no one reads warnings about video drivers on the
front page of the release notes. It could be more in depth, but if you
do a little research and you will find nvidia is really the only brand
you want to use for 3d on FreeBSD. Last time I check the nforce agp
controllers were not properly initilized, so they don't work. I would
like to know if nforce chipsets do 3d with the nvidia video drivers from
the port if any one is listening. This said the 6600 GT, which can be
found for around the price of the x700 pro, will wipe the floor with the
x700 pro.
The nic should work with the net/nvnet port. If you run current the
driver is now in the base system.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
