Re: SATA sil problems ...
On 9/12/06, Michał Garcarz [EMAIL PROTECTED] wrote: Hello I have SATA SIL 3112 controller. Unfortunately it is not working correctly under FreeBSD. It does not work for me, and i found on google that it doesn't work correctly for many other people. I tried Freebsd 4.x, 5.x and 6.1. Here are the errors which occur when system works: Sep 12 11:03:35 multix kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 12 11:03:35 multix kernel: ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=8159967 Sep 12 11:55:36 multix kernel: ad4: FAILURE - READ_DMA status=51READY,DSC,ERROR error=40UNCORRECTABLE LBA=8878591 Sep 12 11:55:36 multix kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Sep 12 11:55:36 multix kernel: ar0: writing of Silicon Image Medley metadata is NOT supported yet Do You have similar problems ? Please try to disable its RAID capabilities, and tweak some compatibility settings, if any. Sil3112 is known to be crap, but it's also known to work for many FreeBSD 6.x users. What SATA controller could you suggest ? I must be on card (PCI?) so i could plug in to my current server. It have to work stable under Freebsd 6.1. It should be chip. It doesn't have to be real hardware RAID (it can use software from BIOS). Don't use software RAID from BIOS, use gmirror/gstripe/gvinum. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SATA sil problems ...
I also have one of these that doesn't work with FreeBSD. I just replaced the controller. What is worse is there are different versions of this chip some that will work with FreeBSD, but many don't. -Derek At 05:51 AM 9/13/2006, Andrew Pantyukhin wrote: On 9/12/06, Micha³ Garcarz [EMAIL PROTECTED] wrote: Hello I have SATA SIL 3112 controller. Unfortunately it is not working correctly under FreeBSD. It does not work for me, and i found on google that it doesn't work correctly for many other people. I tried Freebsd 4.x, 5.x and 6.1. Here are the errors which occur when system works: Sep 12 11:03:35 multix kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 12 11:03:35 multix kernel: ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=8159967 Sep 12 11:55:36 multix kernel: ad4: FAILURE - READ_DMA status=51READY,DSC,ERROR error=40UNCORRECTABLE LBA=8878591 Sep 12 11:55:36 multix kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Sep 12 11:55:36 multix kernel: ar0: writing of Silicon Image Medley metadata is NOT supported yet Do You have similar problems ? Please try to disable its RAID capabilities, and tweak some compatibility settings, if any. Sil3112 is known to be crap, but it's also known to work for many FreeBSD 6.x users. What SATA controller could you suggest ? I must be on card (PCI?) so i could plug in to my current server. It have to work stable under Freebsd 6.1. It should be chip. It doesn't have to be real hardware RAID (it can use software from BIOS). Don't use software RAID from BIOS, use gmirror/gstripe/gvinum. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SATA sil problems ...
Hello I have SATA SIL 3112 controller. Unfortunately it is not working correctly under FreeBSD. It does not work for me, and i found on google that it doesn't work correctly for many other people. I tried Freebsd 4.x, 5.x and 6.1. Here are the errors which occur when system works: Sep 12 11:03:35 multix kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 12 11:03:35 multix kernel: ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=8159967 Sep 12 11:55:36 multix kernel: ad4: FAILURE - READ_DMA status=51READY,DSC,ERROR error=40UNCORRECTABLE LBA=8878591 Sep 12 11:55:36 multix kernel: ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode Sep 12 11:55:36 multix kernel: ar0: writing of Silicon Image Medley metadata is NOT supported yet Do You have similar problems ? What SATA controller could you suggest ? I must be on card (PCI?) so i could plug in to my current server. It have to work stable under Freebsd 6.1. It should be chip. It doesn't have to be real hardware RAID (it can use software from BIOS). Thanx ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
