freebsd6.2Release shutdown problem

I have upgraded my FreeBSD from 6.1 to 6.2-RELEASE-p6, and my xorg if update to version 7.2, the wm is fvwm2.4. Every time after I have been working in the fvwm environment and quited to the console, input shutdown -p now , the console return me the final message: Automatic reboot in 15seconds

Re: freebsd6.2Release shutdown problem

Last time, there was a mistake in the message, the return message should be : Automatic reboot in 15 seconds press a key on the console to abort,here is abort not reboot. And after perssing a key, the message below will show: Press a key on the console to reboot or switch off the system

shutdown problem

Hello, I have reinstalled FreeBSD. First I used 5.2.1 and now am I using 5.3. When I shutdown my system I have to press the power button to shutdown. With 5.2.1 I didn't need to do that. I searched some time and I found this: I found this text on this site:

Re: Shutdown Problem

On Tue, Feb 17, 2004 at 05:29:20PM -0500, [EMAIL PROTECTED] wrote: ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES ACPI: table load failed: AE_NO_ACPI_TABLES I have no idea what that

Shutdown Problem

FreeBSD Version: 5.2 I have previously posted in regards to the shutdown command not powering off my computer. The command I used was: shutdown -p now The system would simple get to the point where it stated Press Any Key to Reboot. This problem did not exist under Windows. The system would

Shutdown problem

Hello guys. Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i invoke comand shutdown -p now or halt -p, my computer doesn't switch off and says: press any button to reboot. How i can switch off it. --

Re: Shutdown problem

Vladimir Yourtaev [EMAIL PROTECTED] writes: Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i invoke comand shutdown -p now or halt -p, my computer doesn't switch off and says: press any button to

Re: Shutdown problem

Vladimir Yourtaev [EMAIL PROTECTED] writes: On Wednesday 11 February 2004 15:55, you wrote: Vladimir Yourtaev [EMAIL PROTECTED] writes: Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i

Re: Shutdown problem

Robert Golovniov [EMAIL PROTECTED] writes: On Wednesday, February 11, 2004, 3:55:21 PM, Lowell Gilbert wrote: LG Assuming you're running FreeBSD 4.9 (you didn't specify): LG you need to enable the apm device in your kernel. What about 5.2? ACPI.

shutdown problem

When i make shutdown on FreeBSD 4.7 i have this strings: Uptime: ... ciss0: invalid command, offense size 0 at 0, value 0x0 (da0:ciss0:0:0:0): Syncronize cache failed, status == 0x4, scsi status == 0xff After this computer correct rebooting and don't run fsck. All services are work correctly.