I have a Netgear FA511 PCMCIA NIC that worked fine under 9.1. Under 9.2 I
get the following message:
Oct 6 21:38:11 monitor4 kernel: dc0: port 0x1100-0x11ff irq 19 at device 0.0 on cardbus0
Oct 6 21:38:11 monitor4 kernel: dc0: attaching PHYs failed
This used to work under 9.1, does anyone kno
Hi Greg & questions@ etc
> That's massively out of date. Mike left Adelaide in 1998, and has
> been working for Apple in Cupertino for about 10 years.
OK deleted.
> > Greg Lehey in Echunga +61 8 83888286
>
> That's out of date too. I left Adelaide over 6 years ago. Up-to-date
> information a
I considered dropping FreeBSD-questions from this reply, but since it
contains out-of-date contact details, I'm leaving them in.
On Saturday, 21 September 2013 at 17:17:07 +0200, Julian H. Stacey wrote:
> Hi, Reference:
>> From:Danny Beger
>> Date:Sat, 21 Sep 2013
Danny Beger wrote:
I have a small law firm in Adelaide and I am looking to engage someone to build
/ purchase a new server to replace my current server which runs v6 freebsd.
Can you recommend anyone?
Regards
_ _
Danny Beger | Beger & Co Lawyers
p: 8362 6400 | f: 8362 3555
www.beger.com.a
Hi, Reference:
> From: Danny Beger
> Date: Sat, 21 Sep 2013 16:30:57 +0930
Danny Beger wrote:
> I have a small law firm in Adelaide and I am looking to engage someone to
> build / purchase a new server to replace my current server which runs v6
> freebsd.
>
> Can you recommen
I have a small law firm in Adelaide and I am looking to engage someone to build
/ purchase a new server to replace my current server which runs v6 freebsd.
Can you recommend anyone?
Regards
_ _
Danny Beger | Beger & Co Lawyers
p: 8362 6400 | f: 8362 3555
www.beger.com.au
Liability limited
sopo...@promonitor.com.mx writes:
> Hello, i have a "Server" whith the screen information like attach
> Server.jpg, assumed that are to save the record of IP cameras like
> network folder (see network.jpg), but another IP cameras need a FTP
> folder and other that folder don't have blank spaces.
>
person what config and install the machine isn't
> more available so any have the information by they work in this
> plataform or make changes, so i need makes this adds at they exist.
The configuration depends on what ftp server you are running
> Or have phone number in Mex
e this (FTP and other folder network) in the "server"
whit freeBSD, the person what config and install the machine isn't
more available so any have the information by they work in this
plataform or make changes, so i need makes this adds at they exist.
Or have phone number in Mexic
Hi all,
I've 2 IOExtreme 80GB cards that work as a stipe yielding 160GB.
These cards use exceptionally fast high quality RAM.
I called support about Centos6/FreeBSD support but they said nada.
The cards do work in Centos6 and I suspect they just wanted to reduce support
load, etc...
Hello, I want to know if geom_raid1e support raid10e level too. The difference
between them is that 1e duplicates the 32-64-128-whatever block data size in
all n disks in the raid1e but raid10e only between n/2 and n (a try to show it
below), making raid10e bigger and more flexible than plains
Hello,
My employer is going to replace my aging laptop soon. We've always used Macs at
work but I'd kinda like to get back to FreeBSD. His criteria are Windows 8 and
a touch screen, mine is decent FreeBSD support.
So, what is the state of support for touch screens at the moment? M
I have an ASUS EeePC 1015B with APU C-50, and the core display card is
Readon HD6250.
I want to know whether FreeBSD 9 Stable or 10 Current support it as TTM
working.
BTW, can anybody recommend some Notebooks supporting FreeBSD perfectly?
___
freebsd
Hi guys,
I have a system running 10-CURRENT (r250217) which I've built Postgresql
9.2.4 with DTrace support enabled on & a VM running 9.1-STABLE (r250009)
which I'm unable to build it on.
On 10-CURRENT the problem is that dtrace -l does not list the postgresql
provider.
My mak
On 26-03-2013, Tue [10:10:46], Oblitey, Edmund wrote:
> I am trying to install FreeBSD on a E7520/6300ESB chipset. Program
> freezes during probing devices. It always restart when it gets to the
> atkbd0. Want to know if u can help me on it.
>
Sometimes it helps to disable ACPI su
On 26/03/2013 14:10, Oblitey, Edmund wrote:
> I am trying to install FreeBSD on a E7520/6300ESB chipset. Program
> freezes during probing devices. It always restart when it gets to the
> atkbd0. Want to know if u can help me on it.
Sounds like there's something on-board that either isn't supported
I am trying to install FreeBSD on a E7520/6300ESB chipset. Program
freezes during probing devices. It always restart when it gets to the
atkbd0. Want to know if u can help me on it.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/
On 03/02/13 19:32, Remko Lodder wrote:
I just removed 7.4/7-STABLE from the list and moved it to the 'unsupported'
section.
Thanks for mentioning this!
Thanks to you!
Although I'm fine (I know what I asked for :-), I'll point out another
little thing: 7.4 is still listed as "legacy" in the
On Mar 2, 2013, at 4:59 PM, Simon L. B. Nielsen wrote:
> On 2 Mar 2013 09:47, "Andrea Venturoli" wrote:
>> Just a quick question on EOL dates.
>>
>> According to http://www.freebsd.org/security/security.html#sup, 7.4R
> support should have ended two days a
On 2 Mar 2013 09:47, "Andrea Venturoli" wrote:
> Just a quick question on EOL dates.
>
> According to http://www.freebsd.org/security/security.html#sup, 7.4R
support should have ended two days ago. Did it?
> Is Feb 28 2013 date confirmed?
>
> Next, 9.0 should reach
Hello.
Just a quick question on EOL dates.
According to http://www.freebsd.org/security/security.html#sup, 7.4R
support should have ended two days ago. Did it?
Is Feb 28 2013 date confirmed?
Next, 9.0 should reach EOL at the end of this month.
Is this confirmed too?
bye & Thanks
Dear Devin
I have got some questions in my mind Brother.
1 MAX HDD Support in FreeBSD
2 MAX HDD Size Support in FreeBSD
Kindly guide me.
Regard's
Junaid
From: Teske, Devin [devin.te...@fisglobal.com]
Sent: Thursday, February 21, 2013 9:45
n the "Hardware Detection Tool" or "HDT"
by Ewan Velu:
http://sourceforge.net/projects/druidbsd/files/Druid-0.0.iso/download
That will allow me to get the vendor/device hex values that identify the card
you want to support. Once you have the 4-digit hex values for "vendor id&q
Dear Team
FreeBSD can support HP D2600 disk enclosure or not?
FreeBSD can support SAS controller card (P800\P812) driver or not?
Regard's
Muhammad Junaid
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/fr
tsu.org]
> Sent: Tuesday, February 19, 2013 12:16 AM
> To: freebsd-questions@freebsd.org
> Cc: fb...@a1poweruser.com; free...@edvax.de
> Subject: Re: How to add zfs support to FreeBSD
>
> Regarding all the recommendations on "how to determine if ZFS is
> available on the system&
; free...@edvax.de
Subject: Re: How to add zfs support to FreeBSD
Regarding all the recommendations on "how to determine if ZFS is
available on the system":
Do not run commands like /sbin/zfs or /sbin/zpool right off the bat.
This will result in the underlying kld bits dynamically load
Regarding all the recommendations on "how to determine if ZFS is
available on the system":
Do not run commands like /sbin/zfs or /sbin/zpool right off the bat.
This will result in the underlying kld bits dynamically loading zfs.ko
and opensolaris.ko on the fly -- even if there aren't any ZFS
files
On Mon, 18 Feb 2013 20:41:19 -0500, Fbsd8 wrote:
> So the next question is there any sh script code I can use to
> check if zfs has been enabled by the rc.conf zfs_enable statement.
>
> I need to determine if zfs is enabled on the host.
Even though the statement zfs_enable="YES" may be part of
/e
ns YES for example.
--
Devin
From: owner-freebsd-questi...@freebsd.org [owner-freebsd-questi...@freebsd.org]
on behalf of Fbsd8 [fb...@a1poweruser.com]
Sent: Monday, February 18, 2013 5:41 PM
To: Polytropon
Cc: FreeBSD questions
Subject: Re: How to add z
Polytropon wrote:
On Mon, 18 Feb 2013 16:57:14 -0500, Fbsd8 wrote:
Fbsd8 wrote:
The handbook does not cover how to add zfs support.
How is it done?
Let me reword. If zfs is in the base system why does it not show up
when I look for it this way?
if config -x $( sysctl -n kern.bootfile
On Mon, 18 Feb 2013 16:57:14 -0500, Fbsd8 wrote:
> Fbsd8 wrote:
> > The handbook does not cover how to add zfs support.
> >
> > How is it done?
>
>
> Let me reword. If zfs is in the base system why does it not show up
> when I look for it this way?
>
>
On 2/18/13 4:21 PM, Fbsd8 wrote:
> The handbook does not cover how to add zfs support.
>
> How is it done?
Does this help you?
https://wiki.freebsd.org/ZFS
Best,
--Glenn
___
freebsd-questions@freebsd.org mailing list
http://lists.fr
On Mon, 18 Feb 2013 16:21:11 -0500, Fbsd8 wrote:
> The handbook does not cover how to add zfs support.
Does the Handbook's section 21.2 fail to contain something
specific you're searching for?
http://www.freebsd.org/doc/handbook/filesystems-zfs.html
> How is it done?
By a
Fbsd8 wrote:
The handbook does not cover how to add zfs support.
How is it done?
Let me reword. If zfs is in the base system why does it not show up
when I look for it this way?
if config -x $( sysctl -n kern.bootfile ) | grep -q
'^[[:space:]]*options[[:space:]]\{1,\}ZFS\>';
The handbook does not cover how to add zfs support.
How is it done?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Hello,
3 version of freebsd I have to patch zfs with this:
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/147881
It looks that in 9.1 still isnt this possibility. Am I right or not? If I am
wrong how can do it?
Thank you
Radek
___
freebsd-questions
atadev->param.config == ATA_PROTO_CFA)
adp->disk->d_flags |= DISKFLAG_CANDELETE;
Since this disk evidently does not support CFA, ata(4) was not raising
DISKFLAG_CANDELETE flag.
With CAM_ATA, I can now use camcontrol(8) to talk to my disks:
# camcontrol identify ada0 | egrep TRIM\|Feature
ite fine, but one thing
in dmesg puzzles me when I mount filesystem from SSD:
TRIM flag on fs but disk does not support TRIM
Under Linux, hdparm(8) reports that TRIM is supported, so I'm wondering
why FreeBSD does not see it. My ata(4) support in /boot/loader.conf looks
like this (lit
> If the BIOS allows turning off the NVidia graphics, FreeBSD 9.1 has a KMS
> driver that will support the Intel graphics.
You don't even need bios to support turning off the nvidia card.. im
using a Asus N53SV-XR1
it has a nvidia optimus GT540M..
KMS works for the intel video card.
driver that will support the Intel graphics.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
On 31/12/2012 10:15, Ashkan Rahmani wrote:
> I really want to migrate to FreeBSD for daily usages, Bu my main issue is
> my
> vga card on my notebook, this is optimus.
>
> any body knows is it supported in this new release?
That's an nVidia card. The FreeBSD version is pretty much irrelevant
her
hi,
I really want to migrate to FreeBSD for daily usages, Bu my main issue is
my
vga card on my notebook, this is optimus.
any body knows is it supported in this new release?
--
King Regards,
Ashkan R < ashkan...@gmail.com >
___
freebsd-questions@freeb
Should ixgbe 2.4.8 (supplied with 9.1-RELEASE) support ALTQ?
My card:
ix0@pci0:3:0:0: class=0x02 card=0xa12c8086 chip=0x150b8086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82598EB 10-Gigabit AT2 Server Adapter'
Hi,
I would like to know why quota is not enabled in the stock kernel..
I remembered that it is not enabled since freebsd 3.5 or freebsd 4 generation.
Now in freebsd 9.0, it still neeed a kernel rebuild.
I have heard it has performance issue (GIANT lock) about quota.
Regards,
Patrick
__
card is supported or not?
Thank you.
RealTek wifi support is nil in 9.x (I have a RealTek wireless and wired
in my laptop and only the wired works). You'll have to use ndistulator
to get RealTek wifi under FreeBSD (its how its done in Linux afaik).
--
Yours in Christ,
Joseph A Na
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/19/12 9:59 AM, Thuban wrote:
> Hello, I would like to try freebsd, but I need to know if my wifi
> card will be usable. A lspci under debian returns : 02:00.0 Network
> controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n
> WiFi Adap
Hello,
I would like to try freebsd, but I need to know if my wifi card will be
usable.
A lspci under debian returns :
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
802.11b/g/n WiFi Adapter (rev 01)
Can you tell me where I can find if this card is supported or not?
Thank y
On Sun, 23 Sep 2012 14:11:42 +0200
Matthias Apitz articulated:
> I have USB UMTS dongle and sticks which work fine with FreeBSD.
>
> The OP, as he says, has an USB wifi stick which works fine too with
> FreeBSD and only wanted (for whatever "important" reason) a new "n"
> one.
Speed and transmit
El día Sunday, September 23, 2012 a las 07:39:19AM -0400, Jerry escribió:
> Waitman Gobble articulated:
>
> > On Sat, Sep 22, 2012 at 4:13 PM, Fbsd8 wrote:
> >
> > > I have 3 usb wifi sticks.
> > > One supports b/g standard only and it configures with no pro
On Sat, 22 Sep 2012 18:43:34 -0700
Waitman Gobble articulated:
> On Sat, Sep 22, 2012 at 4:13 PM, Fbsd8 wrote:
>
> > I have 3 usb wifi sticks.
> > One supports b/g standard only and it configures with no problems.
> > The other 2 support the "n" standard for f
On Sat, Sep 22, 2012 at 4:13 PM, Fbsd8 wrote:
> I have 3 usb wifi sticks.
> One supports b/g standard only and it configures with no problems.
> The other 2 support the "n" standard for faster connection speed between
> the usb stick and the network AP.
> These 2 usb wif
I have 3 usb wifi sticks.
One supports b/g standard only and it configures with no problems.
The other 2 support the "n" standard for faster connection speed between
the usb stick and the network AP.
These 2 usb wifi sticks do not configure no mater what I do.
Thinking the Freebsd wi
;
> Hello,
>
> > Recently I've downloaded the FreeBSD 8.3 Release ISO Image
> > (FreeBSD-8.3-RELEASE-i386-dvd1 (1).iso) and installed in our machine.
> > Actually our requirement is to check the TCP MD5 support on
> > FreeBSD8.3 .
> >
> > But we were not
On 9/6/2012 11:16 AM, SivaReddy Obili wrote:
>
> But we were not able to configure BGP MD5 on that machine.
Perhaps you could post some details as to what you tried. Did you
recompile the kernel with MD5 support ?
In the kernel, you need
optionsTCP_SIGNATURE
optionsIPSEC
Le Thu, 6 Sep 2012 20:46:53 +0530,
SivaReddy Obili a écrit :
Hello,
> Recently I've downloaded the FreeBSD 8.3 Release ISO Image
> (FreeBSD-8.3-RELEASE-i386-dvd1 (1).iso) and installed in our machine.
> Actually our requirement is to check the TCP MD5 support on
> FreeBSD8.3 .
Hi Team,
Recently I've downloaded the FreeBSD 8.3 Release ISO Image
(FreeBSD-8.3-RELEASE-i386-dvd1 (1).iso) and installed in our machine.
Actually our requirement is to check the TCP MD5 support on FreeBSD8.3 .
But we were not able to configure BGP MD5 on that machine.
Can someone p
On Fri, 31 Aug 2012, lokada...@gmx.de wrote:
On 08/29/12 18:14, d...@safeport.com wrote:
This card is on a Dell Inspiron. It works perfectly on 8.x. Dmesg on 8.2
reports it as:
re0:
pciconf:
re0@pci0:4:0:0: class=0x02 card=0x04341028 chip=0x813610ec rev=0x02
hdr=0x00
vendor
On 08/29/12 18:14, d...@safeport.com wrote:
This card is on a Dell Inspiron. It works perfectly on 8.x. Dmesg on 8.2
reports it as:
re0:
pciconf:
re0@pci0:4:0:0: class=0x02 card=0x04341028 chip=0x813610ec
rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Rea
On Wed, 29 Aug 2012 22:50:22 +, James Powell wrote:
> kldload snd_driver only detected my USB Headset and loaded
> theusb audio driver. It did not detect my CMI8788 (ASUS Xonar
> DX PCIe)and snd_cmi does not support it.
>
> cat /dev/sndstat generated this:
> FreeBSD Au
: james4...@hotmail.com
> To: freebsd-questions@freebsd.org
> Date: Wed, 29 Aug 2012 22:50:22 +
> Subject: RE: CMI8788 audio card/chip support
>
>
>
>
>
> kldload snd_driver only detected my USB Headset and loaded theusb audio
> driver. It did not detect my CMI878
kldload snd_driver only detected my USB Headset and loaded theusb audio driver.
It did not detect my CMI8788 (ASUS Xonar DX PCIe)and snd_cmi does not support
it.
cat /dev/sndstat generated this:
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)Installed devices:pcm0:
(play/rec
This card is on a Dell Inspiron. It works perfectly on 8.x. Dmesg on 8.2
reports it as:
re0:
pciconf:
re0@pci0:4:0:0: class=0x02 card=0x04341028 chip=0x813610ec rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Realtek 10/100/1000 PCI-E NIC Family all in one ND
[ Polytropon wrote on Mon 27.Aug'12 at 4:10:57 +0200 ]
> On Mon, 27 Aug 2012 02:01:34 +, James Powell wrote:
> >
> > Are any plans being made to start support for these audio cards?
> > Currently I'm using one in a system I would like to use with
> >
On Mon, 27 Aug 2012 02:01:34 +, James Powell wrote:
>
> Are any plans being made to start support for these audio cards?
> Currently I'm using one in a system I would like to use with
> FreeBSD but it has no support through the kernel and driver
> support from OSSv4 la
Are any plans being made to start support for these audio cards? Currently I'm
using one in a system I would like to use with FreeBSD but it has no support
through the kernel and driver support from OSSv4 lands me with a system that
either freezes or won't boot prop
teably IBM AIX - do not provide
> vendor support and legal indemnification of many open source packages,
> sudo among them. This is official a Big Deal (tm) for this company.
>
> So ... does anyone know of a commercial concern that provide sudo support
> and legal indemnification?
Please forgive the OTishness of this, but I'm hoping some of
my fellows in the large data center space may have a hint or
two here ...
I am working with a firm that needs to run sudo in a variety of
OS environments. A few of these - noteably IBM AIX - do not provide
vendor support and
Wow wait a sec here ...
You've installed a boot loader but no the OS itself and then shut down
the computer ?
Have you tried booting from the CD again ?
On 7/26/12 4:10 PM, Andy Recker wrote:
> yes i booted from a cd the fist time and i almost had it installed but then
> i turned my computer o
yes i booted from a cd the fist time and i almost had it installed but then
i turned my computer off because i was having some problems and i turned it
back on and it is un responsivr and showed only a white screen and thanks
for the help.
On Wed, Jul 25, 2012 at 9:41 AM, Lowell Gilbert <
freebsd-
Andy writes:
> I was trying to install the free bsd to my mac computer its an ibook
> g3 with a 20gb hard dive i was using the powerpc version and it was
> working fine then i got to the part were you have to set up the hard
> drive i got some kind of err so i turned off my computer when i turned
I was trying to install the free bsd to my mac computer its an ibook g3 with a
20gb hard dive i was using the powerpc version and it was working fine then i
got to the part were you have to set up the hard drive i got some kind of err
so i turned off my computer when i turned it back on it only
Hi
I have the Killer 1103 wireless card with a AR9380 chipset on my
laptop. Will this be supported under freebsd-9-*? The freebsd wiki
(http://wiki.freebsd.org/dev/ath%284%29/80211n) mentioned support for
the AR9280, AR9285 and AR9287 in -HEAD.
Cheers
Gautham
Hi all .
I've question about packet filtering, in BSD is possible filter packet
with string-matching ?
I seek something to proxy tcp with check string in packet .
In linux is :
http://www.symantec.com/connect/articles/iptables-linux-firewall-packet-string-matching-su
Hi all .
I've question about packet filtering, in BSD is possible filter packet
with string-matching ?
I seek something to proxy tcp with check string in packet .
In linux is :
http://www.symantec.com/connect/articles/iptables-linux-firewall-packet-string-matching-su
On 11/07/2012 09:44, Vincent Hoffman wrote:
> you could try one of the snapshot isos at
> http://pub.allbsd.org/FreeBSD-snapshots/ (RELENG_9 is 9-STABLE which is
> in the gradual process of becoming 9.1)
> and see if that behaves better. Depends if you are happy running -STABLE
> until the next rel
:
> I found a SVN commit which seems relative with the ServeRAID M5110. Does it
> indicated that the ServeRAID M5110 support codes had been merged into the
> FreeBSD?
>
> http://www.mavetju.org/mail/view_thread.php?list=svn-src-vendor&id=3522011&thread=yes
> *svn commit: r2
I found a SVN commit which seems relative with the ServeRAID M5110. Does it
indicated that the ServeRAID M5110 support codes had been merged into the
FreeBSD?
http://www.mavetju.org/mail/view_thread.php?list=svn-src-vendor&id=3522011&thread=yes
*svn commit: r235420 - vendor/pciids/dist**@
: device not running
Who knows how to support the adapter on the FreeBSD? It there any plan to
support it in the next release?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Soory the previous email had the wrong destinaton.
A patch has been submitted to one of the commiters. It is in the process of
being "commited/approved/looked at" (I not sure what to call it.)
Riaan
___
freebsd-questions@freebsd.org mailing list
http://
On 04/07/2012 19:22, Dylan Castine wrote:
> I want to add support for the AES-GCM cipher to the kernel.
> I am currently using strongswan for an IPsec build and need ESP to use the
> AES-GCM algorithm.
> Any info is appreciated,
Hi, Dylan,
I suggest you enquire via the freebsd-hacke
Hi,
My name is Dylan,
I want to add support for the AES-GCM cipher to the kernel.
I am currently using strongswan for an IPsec build and need ESP to use the
AES-GCM algorithm.
Any info is appreciated,
Thanks for your time,
Dylan
___
freebsd-questions
Hello. I have an Asus U36JC laptop which has two graphic cards (NVIDIA
Optimus technology): an Intel integrated card and GeForce 310M. To
save power on Linux I use acpi_call module to disable nvidia card
completely. This acpi_call module
(https://github.com/mkottman/acpi_call) enables an interface
Hi Devin
There were some great tips in your last post.
Would be great if they couldfo in FreeBSD handbook somewhere.
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com
Reply below not above, cumulative like a play script, & indent with "> ".
Format:
Matthew/Devin, Thanks for the feedback.
After I sent this email, I determined that the Intel i350 is indeed
supported as a machine I built with FreeBSD was utilizing this NIC.
I've tried the BCM5719 with stable/8 (5/21/2012) and it kernel panics
when the interface is configured. I was told by a
On Jun 8, 2012, at 9:45 AM, Devin Teske wrote:
> Hi Rick (!),
>
> On Jun 8, 2012, at 8:07 AM, Rick Miller wrote:
>
[snip]
>>
>> I browsed the source and found many references to the BCM5719 and
>> BCM5720. However, I am unfamiliar enough with driver programming in C
>> to identify if a cont
g that hardware.
> The
> hardware notes at freebsd.org do not specify these controllers are
> supported. Inspection of the bge(4) manpage implies that the
> controllers are supported as seen in the description section where it
> states:
>
> "The bge driver provides su
t; the BCM5719 and BCM5720 are unsupported in FreeBSD at this time. The
> hardware notes at freebsd.org do not specify these controllers are
> supported. Inspection of the bge(4) manpage implies that the
> controllers are supported as seen in the description section where it
> states:
>
rdware notes at freebsd.org do not specify these controllers are
supported. Inspection of the bge(4) manpage implies that the
controllers are supported as seen in the description section where it
states:
"The bge driver provides support for various NICs based on the
Broadcom BCM570x, 571x, 572x, 575
y day and I haven't heard of any problems. I haven't
>noticed any as a user. I'll find out and report back.
>I also have my R620 and the latest stable/8 has support for the H710 card
>("Mini", "Monolithic"). It works well enough to create a couple of ZFS
&g
/H710 reliably for some time?
How can a hardcore server-OS like FreeBSD not have solid support for these
popular server platforms :\
The more I run into these issues, the more I'm being forced to consider Linux;
this is somewhat sad. I hope I'm mistaken but it seems like there is less a
On Fri, 2012-06-01 at 10:45 -0700, Rick Miller wrote:
> BCM5720
I haven't gotten this working on my Dell R620 via bge(4), but we are
actively working on it.
Sean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/f
unable to verify this, but that's why I was asking for clarification.
I will assume it works at this point.
On Fri, Jun 1, 2012 at 1:25 PM, Michael Butler
wrote:
> On 06/01/12 13:06, Rick Miller wrote:
>> Thanks, Jack!
>>
>> Also another support question for the lists.
On 06/01/12 13:06, Rick Miller wrote:
> Thanks, Jack!
>
> Also another support question for the listsIs the Broadcom BCM5719
> supported? I can find neither in the hardware notes for 8.3 nor 9.0.
man bge
___
freebsd-questions@freebsd
Thanks, Jack!
Also another support question for the listsIs the Broadcom BCM5719
supported? I can find neither in the hardware notes for 8.3 nor 9.0.
On Fri, Jun 1, 2012 at 12:49 PM, Jack Vogel wrote:
> Yes, it is supported in the ixgbe driver.
>
> Jack
>
>
> On Fri, Jun
Yes, it is supported in the ixgbe driver.
Jack
On Fri, Jun 1, 2012 at 8:36 AM, Rick Miller wrote:
> Hi All,
>
> I did not see the Intel 82599ES chipset in the hardware release notes
> for 8.3 or 9.0. Are these controllers supported at this time?
>
> --
> Take care
> Rick Miller
> _
Hi All,
I did not see the Intel 82599ES chipset in the hardware release notes
for 8.3 or 9.0. Are these controllers supported at this time?
--
Take care
Rick Miller
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listin
On 23. May 2012, at 08:22 , Venkat Duvvuru wrote:
> Folks,
> Can somebody please explain me why "tcp checsum" calculation is mandated in
> the freebsd network stack (tcp_input--->in6_cksum) albeit the card supports
> it?
>
> Probably Steve is the right person who can answer this.
Just for publi
Folks,
Can somebody please explain me why "tcp checsum" calculation is mandated in
the freebsd network stack (tcp_input--->in6_cksum) albeit the card supports
it?
Probably Steve is the right person who can answer this.
/Venkat
On Wed, May 23, 2012 at 11:27 AM, Venkat Duvvuru wrote:
> Ok. I fou
Ok. I found the reason for the throughput drop in case of IPv6.
Reason is that the "tcp check sum" calculation is mandated in case of IPv6
irrespective of whether the card is doing it or not (checksum offload). Is
there a reason why freebsd is doing it that way?
/Venkat
On Tue, May 22, 2012 at 11
LRO is a huge win for 10G (as is TSO on the TX side), so odds are good its
behind the drop,
in any case you'll be able to test that soon :)
Jack
On Tue, May 22, 2012 at 10:35 AM, Venkat Duvvuru wrote:
> Thanks for the response.
>
> I observed that there is a significant performance drop in cas
1 - 100 of 2264 matches
Mail list logo