Re: Touch screen ETT on Clevo tn120r

2008-10-08 Thread Da Rock

On Tue, 2008-10-07 at 10:53 -0300, Sdävtaker wrote:
 Thanks, here is the usb data:
 usbdevs -dv
 Controller /dev/usb0:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub0
  port 1 powered
  port 2 powered
 Controller /dev/usb1:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub1
  port 1 powered
  port 2 addr 2: full speed, power 100 mA, config 1, Fingerprint
 Sensor(0x2016), TouchStrip(0x147e), rev 0.01
ugen0
 Controller /dev/usb2:
 addr 1: high speed, self powered, config 1, EHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub2
  port 1 powered
  port 2 powered
  port 3 powered
  port 4 powered
 Controller /dev/usb3:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub3
  port 1 powered
  port 2 powered
 Controller /dev/usb4:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub4
  port 1 powered
  port 2 powered
 Controller /dev/usb5:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x),
 Intel(0x), rev 1.00
   uhub5
  port 1 addr 2: full speed, power 100 mA, config 1, TC4UM(0x0306),
 ETT Technology(0x0664), rev 1.00
uhid0
  

Well there it is, now you'll have to find the drivers for xorg and all
else. Run a search on the net with this info now and try to work out
which driver to use. Check out the various touch drivers available for
xorg and narrow it down to which will work for your hardware- if its the
3m touch drivers you're in luck; use the mutouch (I think?) and go from
there.

Xorg should pick them up automatically, but may need some help. Be aware
that there may not be mainstream drivers, I'm trying to work with an
egalax driver which is only available for linux so far, so it can be
quite a trick to get it to all work.

Keep posting as you find more information, and good luck!

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: Touch screen ETT on Clevo tn120r

2008-10-07 Thread Sdävtaker
Thanks, here is the usb data:
usbdevs -dv
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
  uhub0
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
  uhub1
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, Fingerprint
Sensor(0x2016), TouchStrip(0x147e), rev 0.01
   ugen0
Controller /dev/usb2:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
Intel(0x), rev 1.00
  uhub2
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
  uhub3
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
  uhub4
 port 1 powered
 port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
  uhub5
 port 1 addr 2: full speed, power 100 mA, config 1, TC4UM(0x0306), ETT
Technology(0x0664), rev 1.00
   uhid0
 port 2 powered
Controller /dev/usb6:
addr 1: high speed, self powered, config 1, EHCI root hub(0x),
Intel(0x), rev 1.00
  uhub6
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Re: Touch screen ETT on Clevo tn120r

2008-10-06 Thread Da Rock

On Sun, 2008-10-05 at 14:59 -0300, Sdävtaker wrote:
 Hello,
 I installed FreeBSD 7.0r in a Clevo tablet.
 I works great, but i am missing the touchscreen.
 Did someone make it work or got any idea where can i start to try?
 I got the pciconf -lv and scanpci -v info:
 Thanks in advance for any help you can give me.

Check your usb connections- copy the info here as with the pci stuff you
sent. Most of these types of features are connected via usb.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


Touch screen ETT on Clevo tn120r

2008-10-05 Thread Sdävtaker
Hello,
I installed FreeBSD 7.0r in a Clevo tablet.
I works great, but i am missing the touchscreen.
Did someone make it work or got any idea where can i start to try?
I got the pciconf -lv and scanpci -v info:
Thanks in advance for any help you can give me.

pciconf:

[EMAIL PROTECTED]:0:0:0:class=0x06 card=0x01221558 chip=0x2a008086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM
Controller'
class  = bridge
subclass   = HOST-PCI
[EMAIL PROTECTED]:0:2:0:class=0x03 card=0x01221558 chip=0x2a028086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 965 Express Integrated Graphics Controller'
class  = display
subclass   = VGA
[EMAIL PROTECTED]:0:2:1:class=0x038000 card=0x01221558 chip=0x2a038086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 965 Express Integrated Graphics Controller'
class  = display
[EMAIL PROTECTED]:0:26:0:class=0x0c0300 card=0x01221558 chip=0x28348086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:26:1:class=0x0c0300 card=0x01221558 chip=0x28358086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:26:7:class=0x0c0320 card=0x01221558 chip=0x283a8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:27:0:class=0x040300 card=0x01221558 chip=0x284b8086 
rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82801H SUBSYS_81EC1043REV_02\3115836590D8'
class  = multimedia
[EMAIL PROTECTED]:0:28:0:class=0x060400 card=0x01221558 chip=0x283f8086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class  = bridge
subclass   = PCI-PCI
[EMAIL PROTECTED]:0:28:1:class=0x060400 card=0x01221558 chip=0x28418086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 2'
class  = bridge
subclass   = PCI-PCI
[EMAIL PROTECTED]:0:28:2:class=0x060400 card=0x01221558 chip=0x28438086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 3'
class  = bridge
subclass   = PCI-PCI
[EMAIL PROTECTED]:0:28:3:class=0x060400 card=0x01221558 chip=0x28458086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 4'
class  = bridge
subclass   = PCI-PCI
[EMAIL PROTECTED]:0:29:0:class=0x0c0300 card=0x01221558 chip=0x28308086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:29:1:class=0x0c0300 card=0x01221558 chip=0x28318086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:29:2:class=0x0c0300 card=0x01221558 chip=0x28328086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:29:7:class=0x0c0320 card=0x01221558 chip=0x28368086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI'
class  = serial bus
subclass   = USB
[EMAIL PROTECTED]:0:30:0:class=0x060401 card=0x chip=0x24488086
rev=0xf3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
class  = bridge
subclass   = PCI-PCI
[EMAIL PROTECTED]:0:31:0:class=0x060100 card=0x01221558 chip=0x28158086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8M-E (ICH8 Family) LPC Interface Controller'
class  = bridge
subclass   = PCI-ISA
[EMAIL PROTECTED]:0:31:2:class=0x010180 card=0x01221558 chip=0x28288086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8M (ICH8 Family) 3 port SATA Controller'
class  = mass storage
subclass   = ATA
[EMAIL PROTECTED]:0:31:3:class=0x0c0500 card=0x01221558 chip=0x283e8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class  = serial bus
subclass   = SMBus
[EMAIL PROTECTED]:2:0:0:class=0x028000 card=0x10018086 chip=0x42228086 
rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '10418086 Intel 3945ABG Wireless LAN controller'
class  = network
[EMAIL