Things got only marginally better, I now have errors about disks being full
can someone tell me where that is comming from the disks are for all intents
and purposes empty.
6: sd length 76g drive d1
** 6 No space for on d1: No space left on device
7: sd length 76g drive d2
** 7 Unnamed sd is not associated with a plex: Invalid argument
8: sd length 76g drive d3
** 8 Unnamed sd is not associated with a plex: Invalid argument
3 drives:
D d1State: up Device /dev/ad1s1e Avail:
154140/76316 MB (201%)
D d2State: up Device /dev/ad2s1e Avail:
76316/76316 MB (100%)
D d3State: up Device /dev/ad3s1e Avail:
76316/76316 MB (100%)
1 volumes:
V exportState: up Plexes: 1 Size: 0 B
1 plexes:
P export.p0 S State: up Subdisks: 0 Size: 0 B
-1 subdisks:
- Original Message -
From: "lukek" [EMAIL PROTECTED]
To: "FreeBSD" [EMAIL PROTECTED]
Sent: 2003年8月21日 9:34
Subject: Vinum Configuration File
Hello,
I am having a bit of trouble getting the conf file correct. I have listed
the devices and slice names but get the following error
vinum - create -f vinum.conf
1: drive d1 /dev/ad1s1e
** 1 Drive d1, invalid keyword: /dev/ad1s1e: Invalid argument
2: drive d2 /dev/ad2s1e
** 2 Drive d2, invalid keyword: /dev/ad2s1e: Invalid argument
3: drive d3 /dev/ad3s1e
** 3 Drive d3, invalid keyword: /dev/ad3s1e: Invalid argument
0 drives:
1 volumes:
V exportState: down Plexes: 1 Size:149
GB
1 plexes:
P export.p0 R5 State: faulty Subdisks: 3 Size:149
GB
3 subdisks:
S export.p0.s0 State: crashed PO:0 B Size: 74
GB
S export.p0.s1 State: crashed PO: 32 kB Size: 74
GB
S export.p0.s2 State: crashed PO: 64 kB Size: 74
GB
The offending conf file looks like this
drive d2 /dev/ad2s1e
drive d3 /dev/ad3s1e
volume export
plex org raid5 32k
sd length 76319MB drive d1
sd length 76319MB drive d2
sd length 76319MB drive d3
disklabel for the disks in question look like this
tamachi# disklabel -r ad1
# /dev/ad1c:
type: ESDI
disk: ad1s1
snip
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
c: 1562963220unused0 0# (Cyl.0 -
9728*)
e: 15629632204.2BSD 2048 1638489 # (Cyl.0 -
9728*)a
tamachi# disklabel -r ad2
# /dev/ad2c:
type: ESDI
disk: ad2s1
snip
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
c: 1562963220unused0 0# (Cyl.0 -
9728*)
e: 15629632204.2BSD 2048 1638489 # (Cyl.0 -
9728*)
tamachi# disklabel -r ad3
# /dev/ad3c:
type: ESDI
disk: ad3s1
snip
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
c: 1562963220unused0 0# (Cyl.0 -
9728*)
e: 15629632204.2BSD 2048 1638489 # (Cyl.0 -
9728*)
Can someone throw me a life ring here ? The fileserver has been down for a
day now due to hardware failures on the raid device and I am trying to use
Vinum to create a raid device with out much luck.
Also, If I decided to do away with a certain configuration I have been
using
resetconfig , will this allow me to start from scratch again ?
Appreciate any assistance someone can offer on this.
Thanks
LukeK
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
