Why can't ping
I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Why can't ping
Hello! I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 I noticed you are using ed0 as the interface? There is no ed in FreeBSD. Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 This is your interface - le0. options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 It shows that your le0 interface has not been assigned with the network information that you listed. Try again but use le0 as your interface instead. Chris Haulmark media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward --- --- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions- [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
This is your interface - le0. Additonally do not forget to run /etc/netstart options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 It shows that your le0 interface has not been assigned with the network information that you listed. Try again but use le0 as your interface instead. Chris Haulmark sac. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
On Thu, 10 Jul 2008 05:10:25 -0400, Chris Haulmark [EMAIL PROTECTED] wrote: There is no ed in FreeBSD. Off topic, but there is: % man 4 ed ed -- NE-2000 and WD-80x3 Ethernet driver Older NIC, but still present, works for RealTek RTL-8029, for example. -- Polytropon From Magdeburg, Germany Happy FreeBSD user since 4.0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
On Wed, Jul 09, 2008 at 04:01:27PM +0800, EdwardKing wrote: I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I'll make a wild guess that you have DHCP turned on and your le0 NIC was automatically configured the way it shows below. Then, either you don't have an ed0 on the machine, or for some reason, the system does not find it. Check dmesg(8) to see if the system finds an ed0 NIC. jerry I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
