sure, thanks.
On 11/12/11, Manolis Kiagias wrote:
> On 12/11/2011 1:02 μμ, saeedeh motlagh wrote:
>> thanks for your reply
>> it's good but includes recompiling again. i don't want to recompile in
>> any way. is there any other solution for doing that? i don't think
>> so:(. are you sure recompi
On 12/11/2011 1:02 μμ, saeedeh motlagh wrote:
thanks for your reply
it's good but includes recompiling again. i don't want to recompile in
any way. is there any other solution for doing that? i don't think
so:(. are you sure recompiling is the only way to change the baud
rate?
thanks for your at
thanks for your reply
it's good but includes recompiling again. i don't want to recompile in
any way. is there any other solution for doing that? i don't think
so:(. are you sure recompiling is the only way to change the baud
rate?
thanks for your attention
On 11/11/11, Manolis Kiagias wrote:
>
On 9/11/2011 11:11 πμ, saeedeh motlagh wrote:
i know adding the "COM_CONSOLE_SPEED=115200" to make.conf and
recompile it, change the baud rate but i want to know if there is a
way to change it without recompiling.
please let me know if there is any way to do that.
my FreeBSD is 8.0
thanks.
I a
On Thu, Nov 10, 2011 at 11:48 AM, saeedeh motlagh
wrote:
> hi
> thanks for your answer. the output of "ps ax | grep getty" is:
> 1357 u0 Is+0:00.00 /usr/libexec/getty std.115200 ttyu0
> i think it's true. isn't it? but the stty -f /dev/ttyu0 shows 9600 and
> can't have communication with th
On Wed, Nov 9, 2011 at 10:11 AM, saeedeh motlagh
wrote:
> - change the baud rate in /etc/ttys file
(...)
> when i use "stty -f /dev/ttyu0.init 115200" the baud rate for
> ttyu0.init change to 115200. after that i use "kill -1 1" in order to
> reinitialize devices but nothing happened and the ba
hi
i wanna have serial console communication with the other system. i
want to have baud rate 115200 for this communication but the default
is 9600. i test the following options but the baud rate is 9600 yet:
- add the following commands to the /boot/loader.conf file:
boot_multicons=”YES”
boot