gigabyte GA-71XE4 (single amd athlon cpu motherboard

2008-09-04 Thread jlm
volodymyr,

greetings


   #Index Previous Next

gigabyte GA-71XE4 (single amd athlon cpu 
 motherboard

   Volodymyr Kostyrko c.kworr at gmail.com 
   Wed Sep 3 12:29:06 UTC 2008

 freebsd v5.2 and 5.3 boots no problems works well but freebsd v7 locks
 solid right when it get to teh load image to/from md0 device this
 happens when i use teh -release cdrom to install freebsd.

How exactly do you load your image?

i have freebsd 5.2-RELEASE and 5.3-RELEASE cdrom sets (downloaded from 
ftp.au.freebsd.org) and burned to cdrom, the same for 7.0-RELEASE as 
well as FreeSBIE v1.1 (this one is freebsd v5.3-release i think).

u i just put teh cdrom into teh dvd/cdrom reader in teh machine and 
reboot the machine ,, then it reads from teh cdrom and starts up (or 
not) depending on what it finds .. i tried again by using a diferent 
cdrom (cut by a diferent person) and if i use teh standard startup 
procedure it will lock solid, only turning off teh machine and pulling 
out teh power cord will recover it so that it will restart next time 
the power is applied.

if i choose option 3 (the safe mode option) it will continute without a 
pause and sysinstall notes that acpi has been disabled and asks if i 
want to make this installation do not use acpi ?? i now (on this 
machine) i say yes .. do not use acpi on this machine !!!

i noticed that in teh /var/log/messages freebsd says something about 
hptrr (rocketraid i think) not found/not available .. i think one of 
teh lines in teh last screen writings makes reference to this hptrr 
device ?? in a day or two i will have access again to this machine, it 
is .. i am not able to get to do anything for it. i plan to try this 
installation again and see if i can capture teh infomations ???

is there some way that i can capture information this early in teh 
'boot' processs ?? i do not have a vt100/vt52 etc terminial to plugin 
and try to capture the relevent details vi dumb terminal ??

much kind regards and sincere appreciations..

cheers and much thanks

jonathan

--  

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


gigabyte GA-71XE4 (single amd athlon cpu motherboard

2008-09-03 Thread jonathan michaels
greetings all,

i just repaired my old machine by replacing the damaged motherboard
with these items

motherboard: Gigabyte GA-71XE4 (chipset AMD-75?, with single AMD Athlon cpu)
audio:   Creative SB PCI 128 (CT-4815)
video:   nVidia GeForce 4 MX440 SE
nic: D-Link DFE-530TX+ 10/100BaseTX (be replaced with intel 10/100)

freebsd v5.2 and 5.3 boots no problems works well but freebsd v7 locks
solid right when it get to teh load image to/from md0 device this
happens when i use teh -release cdrom to install freebsd.

i looked on google and on marc tying for gigabyte/ga-71xe4 and various
combinations of teh whole chain of bits, also tried specific freebsd
lists (-hardware and -questions) and drew blanks .. guess this will
change that .. grin.

after a bit of thinking i tried booting in 'Safe mode it booted
properly and went on to complete the installation and is now working as
well as i have seen freebsd work on my other machines.

after starting to use safe mode i had no further problems witht eh
boot/startup lockups.

another thing thats confused me is how freebsd can work out the ide
cable is teh wrong one, dose it really make that much difference ??

i have attached the /var/run/dmesg.run and cut down version of
/var/log/messages.

please reply to address in headers .. i'm not subscribed to questions-


some light would be appreciated on this whole acpi issue and if i need
nvidia drivers to make teh video card work in normal/text mode ??

much thanks and kind regards

jonathan


/var/run/dmesg.run

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1009.95-MHz 686-class CPU)
  Origin = AuthenticAMD  Id = 0x642  Stepping = 2
  
Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
  AMD Features=0xc0440800SYSCALL,b18,MMX+,3DNow!+,3DNow!
real memory  = 805240832 (767 MB)
avail memory = 773992448 (738 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
cpu0 on motherboard
pcib0: AMD-751 host to PCI bridge pcibus 0 on motherboard
pir0: PCI Interrupt Routing Table: 7 Entries on motherboard
pci0: PCI bus on pcib0
agp0: AMD 751 host to AGP bridge on hostb0
pcib1: PCI-PCI bridge at device 1.0 on pci0
pci1: PCI bus on pcib1
vgapci0: VGA-compatible display mem 
0xee00-0xeeff,0xd800-0xdfff,0xe5c8-0xe5cf irq 11 at 
device 5.0 on pci1
isab0: PCI-ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
atapci0: AMD 756 UDMA66 controller port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: ATA channel 0 on atapci0
ata0: [ITHREAD]
ata1: ATA channel 1 on atapci0
pci0: bridge at device 7.3 (no driver attached)
ohci0: AMD-756 USB Controller mem 0xefffe000-0xefffefff irq 9 at device 7.4 
on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: AMD-756 USB Controller on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb0
uhub0: 4 ports with 4 removable, self powered
rl0: D-Link DFE-530TX+ 10/100BaseTX port 0xdc00-0xdcff mem 
0xef00-0xefff irq 11 at device 9.0 on pci0
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:05:5d:d5:23:f3
rl0: [ITHREAD]
pcm0: Creative CT5880-C port 0xde00-0xde3f irq 10 at device 10.0 on pci0
pcm0: SigmaTel STAC9721/23 AC97 Codec
pcm0: [ITHREAD]
pcm0: Playback: DAC1,DAC2 / Record: ADC
pmtimer0 on isa0
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: Enhanced floppy controller at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FILTER]
ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: Parallel port bus on ppc0
ppbus0: [ITHREAD]
plip0: PLIP network interface on ppbus0
lpt0: Printer on ppbus0
lpt0: Interrupt-driven port
ppi0: Parallel I/O on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: System console at flags 0x100 on isa0
sc0: VGA 16 virtual consoles, flags=0x300
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 

Re: gigabyte GA-71XE4 (single amd athlon cpu motherboard

2008-09-03 Thread Volodymyr Kostyrko

jonathan michaels wrote:

greetings all,



freebsd v5.2 and 5.3 boots no problems works well but freebsd v7 locks
solid right when it get to teh load image to/from md0 device this
happens when i use teh -release cdrom to install freebsd.


How exactly do you load your image?

--
Sphinx of black quartz judge my vow.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]