Kevin Kinsey
Thank you for your suggestion about bktr_mem.ko.
I loaded it on the 5.3-RELEASE system with these results:
> kldload -v bktr_mem.ko
bktr_mem: memory holder loaded
Loaded bktr_mem.ko, id=7
> tuneradio -f 10110
bktr0: arg=10110 temp=10110
bktr0: tv_freq returned: -1
My best guess is t
[EMAIL PROTECTED] wrote:
Kevin Kinsey
Thank you for your questions.
You're welcome, of course.
On 4.10-RELEASE I had to create the link
/dev/tuner -> /dev/tuner0
myself. On 5.3-RELEASE this link must have
been created during the installation since
it was there when I went to create it.
pcf.ko i
Kevin Kinsey
Thank you for your questions.
On 4.10-RELEASE I had to create the link
/dev/tuner -> /dev/tuner0
myself. On 5.3-RELEASE this link must have
been created during the installation since
it was there when I went to create it.
pcf.ko is not found on my 4.10-RELEASE system.
I believe tha
Nikolas Britton
Thank you for your input. I have written a web page describing
some of my experiences with my TV card at
http://www.io.com/~rotenber/
It is 4.10-RELEASE only, but you may find it helpful.
Regards,
J.M. Rotenberry
___
[EMAIL PROTECTE
[EMAIL PROTECTED] wrote:
I too am trying to get a tv tunner working today, here's my notes so far
(might be some links in it to help you out):
Pinnacle Systems
EMPTYV
EMPTYV-51013825-1.5
Chips:
Conexant
Fusion 878A
25878-13
Philips
TDA9885TS
http://www.semiconductors.philips.com/pip/TDA9885.html
[EMAIL PROTECTED] wrote:
Hi
iicbb - OK with 4.8, broken with 5.3
I am trying to migrate from 4.8-RELEASE to 5.3-RELEASE.
Everything appears to function properly except my TV card.
Since I have installed 5.3-RELEASE on a separate hard drive
it is easy to compare it to the 4.10-RELEASE. The
Hi
iicbb - OK with 4.8, broken with 5.3
I am trying to migrate from 4.8-RELEASE to 5.3-RELEASE.
Everything appears to function properly except my TV card.
Since I have installed 5.3-RELEASE on a separate hard drive
it is easy to compare it to the 4.10-RELEASE. The hardware on
these two systems
