Re: k3b incorrectly identifies scsi r/w drive as read-only -- how to change?
On 3/24/06, Oliver Iberien <[EMAIL PROTECTED]> wrote: > > On Friday 24 March 2006 12:12, you wrote: > > On 3/24/06, Oliver Iberien <[EMAIL PROTECTED]> wrote: > > > I've got my Plextor PX-W4012S SCSI R/W drive recognized by k3b by > adding > > > ALL ALL = NOPASSWD: /sbin/camcontrol devlist > > > to sudoers and starting k3b with sudo. Unfortunately, k3b has the idea > > > that > > > this is read-only. In "Setup Devices" there is no way to remove a > device > > > from > > > the "readonly" heading and place it under "writer drives," and none of > > > the options except for the cdrao editor are editable. Attempting to > > > change the driver crashes the program. > > > > > > k3b must be reading this from somewhere, but where? The drive is r,w > is > > > fstab. > > > > I don't have access to my laptop (where I recently dealt with this), but > > /etc/devfs.conf (i think) has places where you can set the permission to > > devices. I believe I did 0666 (read/write to all) for acd0, cdrom0, > pass0, > > and perhaps 1 other. After that (and manually setting perms to > > /dev/) I was able to use k3b without being root. > > I had done that. I can access the drive, but it is still not being > correctly > recognized as a writer. > > Oliver > What happens when you run k3b as root (just to test) Also, what are the permissions on (assuming the writer is the first cd device) /dev/cd0 /dev/acd0 /dev/pass0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: k3b incorrectly identifies scsi r/w drive as read-only -- how to change?
On Friday 24 March 2006 12:12, you wrote: > On 3/24/06, Oliver Iberien <[EMAIL PROTECTED]> wrote: > > I've got my Plextor PX-W4012S SCSI R/W drive recognized by k3b by adding > > ALL ALL = NOPASSWD: /sbin/camcontrol devlist > > to sudoers and starting k3b with sudo. Unfortunately, k3b has the idea > > that > > this is read-only. In "Setup Devices" there is no way to remove a device > > from > > the "readonly" heading and place it under "writer drives," and none of > > the options except for the cdrao editor are editable. Attempting to > > change the driver crashes the program. > > > > k3b must be reading this from somewhere, but where? The drive is r,w is > > fstab. > > I don't have access to my laptop (where I recently dealt with this), but > /etc/devfs.conf (i think) has places where you can set the permission to > devices. I believe I did 0666 (read/write to all) for acd0, cdrom0, pass0, > and perhaps 1 other. After that (and manually setting perms to > /dev/) I was able to use k3b without being root. I had done that. I can access the drive, but it is still not being correctly recognized as a writer. Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: k3b incorrectly identifies scsi r/w drive as read-only -- how to change?
On 3/24/06, Oliver Iberien <[EMAIL PROTECTED]> wrote: > > I've got my Plextor PX-W4012S SCSI R/W drive recognized by k3b by adding > ALL ALL = NOPASSWD: /sbin/camcontrol devlist > to sudoers and starting k3b with sudo. Unfortunately, k3b has the idea > that > this is read-only. In "Setup Devices" there is no way to remove a device > from > the "readonly" heading and place it under "writer drives," and none of the > options except for the cdrao editor are editable. Attempting to change the > driver crashes the program. > > k3b must be reading this from somewhere, but where? The drive is r,w is > fstab. > > Thanks, > > Oliver > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > [EMAIL PROTECTED]" > I don't have access to my laptop (where I recently dealt with this), but /etc/devfs.conf (i think) has places where you can set the permission to devices. I believe I did 0666 (read/write to all) for acd0, cdrom0, pass0, and perhaps 1 other. After that (and manually setting perms to /dev/) I was able to use k3b without being root. Hope this helps. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
k3b incorrectly identifies scsi r/w drive as read-only -- how to change?
I've got my Plextor PX-W4012S SCSI R/W drive recognized by k3b by adding ALL ALL = NOPASSWD: /sbin/camcontrol devlist to sudoers and starting k3b with sudo. Unfortunately, k3b has the idea that this is read-only. In "Setup Devices" there is no way to remove a device from the "readonly" heading and place it under "writer drives," and none of the options except for the cdrao editor are editable. Attempting to change the driver crashes the program. k3b must be reading this from somewhere, but where? The drive is r,w is fstab. Thanks, Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
