Hello there.
I'm not good in eanglish.
I have bought Samsung SATA-II HDD 80G 7200. I wanted to install
FreeBSD 6.1 (i386) on it, but when i try to, installation is going
very very slow. I thought that the problem is with my CD, but i have
succesfully installed FreeBSD on my IDE HDD from that CDs. And it's
work well, except that it doesn't work with my Samsung SATA-II HDD.
When i try to mount fat32 partition from that SATA-II HDD, FreeBSD is
halted (or hangs) (start thinking very very slow). So i don't know
what to do.
atacontrol mode ad4 says - current mode = SATA 300
I have not configured kernel yet.
Here is my dmesg.boot
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May 7 04:42:56 UTC 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2211.35-MHz 686-class CPU)
Origin = AuthenticAMD Id = 0x40ff2 Stepping = 2
Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2
Features2=0x2001SSE3,CX16
AMD Features=0xea500800SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow
AMD Features2=0x1dLAHF,b2,b3,CR8
real memory = 536674304 (511 MB)
avail memory = 515637248 (491 MB)
ACPI APIC Table: A M I OEMAPIC
ioapic0 Version 1.1 irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: A M I OEMRSDT on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec0, 1000 (3) failed
acpi0: reservation of fee0, 1000 (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x2008-0x200b on acpi0
cpu0: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pci0: memory, RAM at device 0.0 (no driver attached)
isab0: PCI-ISA bridge at device 1.0 on pci0
isa0: ISA bus on isab0
pci0: serial bus, SMBus at device 1.1 (no driver attached)
pci0: memory, RAM at device 1.2 (no driver attached)
ohci0: OHCI (generic) USB controller mem 0xfbffb000-0xfbffbfff irq 21 at
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: OHCI (generic) USB controller on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: EHCI (generic) USB 2.0 controller mem 0xfbffac00-0xfbffacff irq 22 at
device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: EHCI (generic) USB 2.0 controller on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: nVidia nForce MCP55 UDMA133 controller port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: ATA channel 0 on atapci0
ata1: ATA channel 1 on atapci0
atapci1: nVidia nForce MCP55 SATA300 controller port
0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem
0xfbff9000-0xfbff9fff irq
23 at device 5.0 on pci0
ata2: ATA channel 0 on atapci1
ata3: ATA channel 1 on atapci1
atapci2: nVidia nForce MCP55 SATA300 controller port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem
0xfbff8000-0xfbff8fff irq
20 at device 5.1 on pci0
ata4: ATA channel 0 on atapci2
ata5: ATA channel 1 on atapci2
atapci3: nVidia nForce MCP55 SATA300 controller port
0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f mem
0xfbff7000-0xfbff7fff irq
21 at device 5.2 on pci0
ata6: ATA channel 0 on atapci3
ata7: ATA channel 1 on atapci3
pcib1: ACPI PCI-PCI bridge at device 6.0 on pci0
pci1: ACPI PCI bus on pcib1
pci1: simple comms, generic modem at device 0.0 (no driver attached)
pci1: multimedia, audio at device 1.0 (no driver attached)
pci1: input device at device 1.1 (no driver attached)
pci0: bridge at device 8.0 (no driver attached)
pcib2: ACPI PCI-PCI bridge at device 11.0 on pci0
pci2: ACPI PCI bus on pcib2
pcib3: ACPI PCI-PCI bridge at device 12.0 on pci0
pci3: ACPI PCI bus on pcib3
pcib4: ACPI PCI-PCI bridge at device 13.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge at device 14.0 on pci0
pci5: ACPI PCI bus on pcib5
pcib6: ACPI PCI-PCI bridge at device 15.0 on pci0
pci6: ACPI PCI bus on pcib6
pci6: display, VGA at device 0.0 (no driver attached)
acpi_button0: Power Button on acpi0
sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: Generic IRDA-compatible device port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: floppy drive controller (FDE) port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
ppc0: Standard parallel printer port port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: Parallel port bus on ppc0
plip0: PLIP network
