Hi!
On Thu, 14 Aug 2008 10:06:46 +0800, EdwardKing [EMAIL PROTECTED] wrote:
I use SSH to remote FreeBSD
$ssh [EMAIL PROTECTED]
password:
Then I SSh to suspend client in that remote machine:
$~
/home/tom: Permission denied
Permission denied? Why? How to do that?
In opposite to Matthew
I use SSH to remote FreeBSD
$ssh [EMAIL PROTECTED]
password:
Then I SSh to suspend client in that remote machine:
$~
/home/tom: Permission denied
Permission denied? Why? How to do that?
--
EdwardKing wrote:
I use SSH to remote FreeBSD
$ssh [EMAIL PROTECTED]
password:
Then I SSh to suspend client in that remote machine:
$~
/home/tom: Permission denied
Permission denied? Why? How to do that?
What happened here is that you were trying to type an escape code
into ssh -- eg.
I have a machine that is my firewall/gateway to a private network NATing
non-routable addresses. I can ssh at-will from hosts on the private
network to machines out on the net, but when I try to ssh from the
firewall machine to a particular address, it just hangs and eventually
times out. Verbose
On Sat, Jul 07, 2007 at 02:52:21AM -0500, Tim Daneliuk wrote:
I have a machine that is my firewall/gateway to a private network NATing
non-routable addresses. I can ssh at-will from hosts on the private
network to machines out on the net, but when I try to ssh from the
firewall machine to a
OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.7e-p1 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to xx.com [x.x.x.x] port 22.
What is really baffling is that if I try the exact same thing from, say,
a
Jonathan Chen wrote:
On Sat, Jul 07, 2007 at 02:52:21AM -0500, Tim Daneliuk wrote:
I have a machine that is my firewall/gateway to a private network NATing
non-routable addresses. I can ssh at-will from hosts on the private
network to machines out on the net, but when I try to ssh from the
Simon Chang wrote:
OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.7e-p1 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to xx.com [x.x.x.x] port 22.
What is really baffling is that if I try the exact same
Tim Daneliuk wrote:
Simon Chang wrote:
Nevermind - it was total pilot error on my part involving being up way
too late and not using my noggin' ... sorry to disturb... carry on ;)
--
Tim Daneliuk [EMAIL
On Sat, Jul 07, 2007 at 11:59:28AM -0500, Tim Daneliuk wrote:
Jonathan Chen wrote:
On Sat, Jul 07, 2007 at 02:52:21AM -0500, Tim Daneliuk wrote:
I have a machine that is my firewall/gateway to a private network NATing
non-routable addresses. I can ssh at-will from hosts on the private
network
Hi list. When a password is send (via a POP3 session without SSL, or without
establishing a secure connection) it can be retrieved by the ISP, or
somebody ahead, right. AFAIK, making an SSH session to a server and
forwarding, for instance, port 110 (POP3) to the SSH session, or some other
port /
At 5:42p -0400 on 19 May 2007, Arvee Klesk wrote:
Hi list. When a password is send (via a POP3 session without SSL,
or without
establishing a secure connection) it can be retrieved by the ISP, or
somebody ahead, right. AFAIK, making an SSH session to a server and
forwarding, for instance, port
On Wed, 2 Nov 2005 05:51 pm, Glenn Dawson wrote:
At 11:20 PM 11/1/2005, user wrote:
Hello,
Sometimes I have a bunch of data that I want to transfer from
source to destination over ssh, but I want to tar it up on
the way over (that is, I don't have enough space on the
source to create a
Malcolm Kay wrote:
On Wed, 2 Nov 2005 05:51 pm, Glenn Dawson wrote:
At 11:20 PM 11/1/2005, user wrote:
Is that possible ? rsync/rdist are not available. I need to
do this over ssh and tar, as in the above examples.
To user
From the other end:-
% ssh [EMAIL PROTECTED] tar -f /files
On Nov 1, 2005, at 11:20 PM, user wrote:
I do that like this:
tar cf - /files | ssh [EMAIL PROTECTED] cat
/usr/home/user/file_data2.tar
or if I want to split it into multiple files:
tar cf - /files | ssh [EMAIL PROTECTED] split - -b 1024m
/usr/home/user/file_data2.tar
This works just
Hello,
Sometimes I have a bunch of data that I want to transfer from source to
destination over ssh, but I want to tar it up on the way over (that is, I
don't have enough space on the source to create a tarball of the data and
then just scp the tarball over...)
I do that like this:
tar cf -
At 11:20 PM 11/1/2005, user wrote:
Hello,
Sometimes I have a bunch of data that I want to transfer from source to
destination over ssh, but I want to tar it up on the way over (that is, I
don't have enough space on the source to create a tarball of the data and
then just scp the tarball
Hey guys had a SSH forward question so here goes...
I have 2 computers on my lan one of them is a server and the other is my
desktop.
Desktop 192.168.1.104
Server 192.168.1.103
Now I have port forwarding setup on my crappy linksys router so 22 is
pointing to my Server (192.168.1.103)
My
On Aug 31, 2005, at 9:22 AM, Eric Murphy wrote:
Hey guys had a SSH forward question so here goes...
I have 2 computers on my lan one of them is a server and the other
is my desktop.
Desktop 192.168.1.104
Server 192.168.1.103
Now I have port forwarding setup on my crappy linksys router
Hey guys had a SSH forward question so here goes...
I have 2 computers on my lan one of them is a server and the other is my
desktop.
Desktop 192.168.1.104
Server 192.168.1.103
Now I have port forwarding setup on my crappy linksys router so 22 is
pointing to my Server (192.168.1.103)
My
On 8/30/05, Eric Murphy [EMAIL PROTECTED] wrote:
Hey guys had a SSH forward question so here goes...
I have 2 computers on my lan one of them is a server and the other is my
desktop.
Desktop 192.168.1.104
Server 192.168.1.103
Now I have port forwarding setup on my crappy linksys
On 8/30/05, Eric Murphy [EMAIL PROTECTED] wrote:
Can you give me an example at what that would look like if im useing a
linux box...can you giev me the command line santax? I used port to
point to 192.168.1.104:22
Umm? I'm talking about simple NAT port forwarding:
VNC Putty SSL
From: Andy Firman [EMAIL PROTECTED]
On Fri, May 06, 2005 at 04:28:40PM +0100, Xian wrote:
To restore the filesystems:
Boot from a rescue disk and create the partitions of on the disk. I've
never
smashed anything badly enough to need to work out how to do this. At
least
the partitions were
On Fri, May 06, 2005 at 04:28:40PM +0100, Xian wrote:
To restore the filesystems:
Boot from a rescue disk and create the partitions of on the disk. I've never
smashed anything badly enough to need to work out how to do this. At least
the partitions were still there.
Well this is more
I am following this guide:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/backup-basics.html
and successfully dumped /, /usr, and /var over ssh to another box and
called them root-back.gz, usr-back.gz, and var-back.gz.
But I can't figure out the restore part. Let's say I replace the
On Friday 06 May 2005 15:34, Andy Firman wrote:
I am following this guide:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/backup-basics.htm
l and successfully dumped /, /usr, and /var over ssh to another box and
called them root-back.gz, usr-back.gz, and var-back.gz.
But I can't
After modifying the sshd.conf to allow my new IP access via ssh I can't
connect. I have stopped and restarted the service and the server and double
check the conf file. I have checked hosts.allow and found nothing wrong.
Is there some other file I need to change as well? If not, how would I go
After modifying the sshd.conf to allow my new IP access via ssh I can't
connect. I have stopped and restarted the service and the server and
double
'Allow your new ip address' ?
What you can specify on /etc/ssh/sshd_config is the ip the server binds
to, not the ip addresses of the clients
On Wed, 25 Aug 2004 13:42:52 -0500
Mark Tullos [EMAIL PROTECTED] wrote:
After modifying the sshd.conf to allow my new IP access via ssh I can't
connect. I have stopped and restarted the service and the server and
double check the conf file. I have checked hosts.allow and found nothing
After modifying the sshd.conf to allow my new IP access via ssh I
can't connect. I have stopped and restarted the service and the
server and double
'Allow your new ip address' ?
What you can specify on /etc/ssh/sshd_config is the ip the server
binds to, not the ip addresses of the
Hello...
Sorry if this is too OT, but I recently posted about copying some files
from one server to another using scp...I thought I could get that set
up easily since I've done it before. Silly me!
The primary server is running
# ssh -V
OpenSSH_3.5p1 FreeBSD-20030924, SSH protocols 1.5/2.0,
On Mon, Jun 07, 2004 at 02:31:43PM -0400, Bart Silverstrim wrote:
While the server I want to copy FROM is apparently running
sshd2: SSH Secure Shell 3.2.3 (non-commercial version) on
i686-pc-linux-gnu
I have created the pub key on the FreeBSD system with
ssh-keygen -t dsa
then copied the
Le 17/05/2004 à 22:22:57-0700, Matt Navarre a écrit
When using DSA publuc key authentication with SSH does the [EMAIL PROTECTED] at the
end of the public key have any bearing on whether the key wil authenticate or
not?
It's just for your information. You can put anything (event nothing).
When using DSA publuc key authentication with SSH does the [EMAIL PROTECTED] at the
end of the public key have any bearing on whether the key wil authenticate or
not?
Anyone know off the top of their head?
--
[EMAIL PROTECTED]
it was a hard sell, since he's a database person, and as far as
Here is what I need to do:
I need to somehow automate an rsync from 1 box to several others.
I have set up SSH for RSAAuthentication, the method I'd prefer to use (over
RHostsRSA).
I am able to slogin to the other boxes w/o supplying the passphrase.
But here is where I'm stuck. How do I make a
On Fri, Apr 09, 2004 at 12:21:33PM -0700, Brent Wiese wrote:
Here is what I need to do:
I need to somehow automate an rsync from 1 box to several others.
I have set up SSH for RSAAuthentication, the method I'd prefer to use (over
RHostsRSA).
I am able to slogin to the other boxes w/o
Hello all,
I was just in the process of compiling something through ssh(i.e. I
ssh'd to my machine at home and ran make install) but during the
compilation, my ssh client crashed. Does that mean that my build was
killed as well?
Thanks
Tyler
To Unsubscribe: send mail to [EMAIL
On Thu, Jan 30, 2003 at 12:46:30PM -0500, Tyler Parrott wrote:
Hello all,
I was just in the process of compiling something through ssh(i.e. I
ssh'd to my machine at home and ran make install) but during the
compilation, my ssh client crashed. Does that mean that my build was
killed as
38 matches
Mail list logo
