detects fine
umass0: detached
umass0: TEAC TEAC FD-05PUB, rev 2.00/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TEAC FD-05PUB 3000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C)
i downloaded ufdformat from http://people.freebsd.org/~bms/dump/tools/ufdformat/
the tool compiles without errors on FreeBSD 6.2/i386
bit it doesn't work
it stalls at first cylinder and i'm getting in dmesg:
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, STALLED
umass0: CBI bulk-out stall clear failed, STALLED
CTRL-C and kill doesn't work.
unplugging works.
from formatted diskettes i can read data (like dd if=/dev/da0
of=/dev/null bs=18k) but i can't write.
any attempt to write says "device busy".
my drive is listed in scsi_da.c quirks like this
* TEAC USB floppy mechanisms
*/
{T_DIRECT, SIP_MEDIA_REMOVABLE, "TEAC" , "FD-05*", "*"},
/*quirks*/ DA_Q_NO_SYNC_CACHE
more quirks? any clue?
thank you
Wojtek
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
