On 2/28/2010 3:10 PM, dacoder wrote:
on a 2nd reading, i see from your ifconfig output that wlan0 is up. so
instead of "ifconfig wlan0 up" i think you need "ifconfig wlan0 create
wlandev ath0" (assuming your wireless nic is ath0), then "dhclient
wlan0".
that does it for me, anyway. i find it
I am trying to setup a wireless nic on a machine I just installed pcbsd
8.0 on.
Its not going well.
output from ifconfig -a is:
re0: flags=8843
metric 0 mtu 1500
options=389b
ether 00:1e:33:99:a1:a3
inet6
2010-02-25 21:45, Marwan Sultan skrev:
Hello List,
well im sure its a small mistake here or there.
I know driver works with PCBS perfectly, but i cannot manualy configure it.
something missing..
its iwn wireless driver, here are the settings :
/boot/loader.conf
legal.inte
On Thu, Feb 25, 2010 at 2:45 PM, Marwan Sultan wrote:
>
> Hello List,
>
>
>
> well im sure its a small mistake here or there.
>
> I know driver works with PCBS perfectly, but i cannot manualy configure it.
>
> something missing..
>
>
>
> its iwn wireless driver, here are the settings :
>
>
>
>
Hello List,
well im sure its a small mistake here or there.
I know driver works with PCBS perfectly, but i cannot manualy configure it.
something missing..
its iwn wireless driver, here are the settings :
/boot/loader.conf
legal.intel_iwn.license_ack=1
if_iwn_load="YES"
wla
Hi!
I'm running FreeBSD 6.1 on a Dell Inspiron 6400 which is configured to dual
boot into Windows XP-Pro.
I just got this laptop today, but I've been using Freebsd since 3.4, or
earlier.
When I boot into Windows I am able to access my Linksys wireless router.
There is another secured wireles
So I created a wrapper for my wireless card (Netgear WG311v3) drivers from
windows using ndisgen following instructions at
http://www.pingwales.co.uk/2005/07/15/Project-Evil.htm
I loaded the module into loader.conf
On boot I get this message:
ndis0: mem
0xe0a0-0xe0a0,0xe0a1-0xe0a1ff
wasn't able to pick up any leases and I saw "status: no
carrier" on ifconfig ath0.
FreeBSD wireless setup is new to me, so I'm probably missing something
obvious. The card is a DLink Airplus G and I have the if_ath.ko loading
at
p any leases and I saw "status: no
carrier" on ifconfig ath0.
FreeBSD wireless setup is new to me, so I'm probably missing something
obvious. The card is a DLink Airplus G and I have the if_ath.ko loading
at boot without any problems. Any hints are most appreciated. Thanks,
Nathan
__
On 2005-12-15 22:34, Jim Pazarena <[EMAIL PROTECTED]> wrote:
> I can't believe how incredibly easy it was to get
> the wireless going in my laptop.
>
> add: if_ath_load="YES" to /boot/loader.conf
>
> and: ifconfig_ath0="dhcp" to /etc/rc.conf
>
> and it "works" !
>
> please tell me where I ca
Jim Pazarena wrote:
I can't believe how incredibly easy it was to get
the wireless going in my laptop.
add: if_ath_load="YES" to /boot/loader.conf
and: ifconfig_ath0="dhcp" to /etc/rc.conf
and it "works" !
please tell me where I can read up on how to "control" the
wireless link. Such a
I can't believe how incredibly easy it was to get
the wireless going in my laptop.
add: if_ath_load="YES" to /boot/loader.conf
and: ifconfig_ath0="dhcp" to /etc/rc.conf
and it "works" !
please tell me where I can read up on how to "control" the
wireless link. Such as how to enter the "S
12 matches
Mail list logo