Re: Page fault in kernel when using CD, BSD 7.2

2010-08-13 Thread Chris Whitehouse
Mark Terribile wrote: AMI BIOS. The NB heatsink is barely warm (fan cooled), the not necessarily a good sign, you would get this if the heat from the cpu is not getting transferred to the heatsink. Remove, clean, apply new heat transfer compound, make sure the heatsink is actually seating

RE: Page fault in kernel when using CD, BSD 7.2

2010-08-12 Thread Graeme Dargie
-Original Message- From: Mark Terribile [mailto:materrib...@yahoo.com] Sent: 12 August 2010 03:32 To: freebsd-questions@freebsd.org Subject: Page fault in kernel when using CD, BSD 7.2 Hi, In the last two days I've had two nasty problems on two machines. The first started dumping

Re: Page fault in kernel when using CD, BSD 7.2

2010-08-12 Thread Mark Terribile
Hi, Second problem: on a machine (Core 2 Quad, 2.24 GHz) the CD/DVD drive has started to give me page faults in the kernel.  The press any key on the console to halt the reboot does not work. Okay, now it's happening with nothing but the fsck running. It takes maybe fifteen minutes.

Re: Page fault in swapper on boot

2010-06-28 Thread Richard Kolkovich
On Mon, Jun 28, 2010 at 02:16:42PM -0500, Richard Kolkovich wrote: I rebooted today to recover a couple devices which were in use by zombie processes. Now, I'm met with the same page fault documented in this previous message:

Re: Page fault in swapper on boot

2010-06-28 Thread Michael Powell
Richard Kolkovich wrote: On Mon, Jun 28, 2010 at 02:16:42PM -0500, Richard Kolkovich wrote: I rebooted today to recover a couple devices which were in use by zombie processes. Now, I'm met with the same page fault documented in this previous message:

Re: Page Fault.

2008-12-01 Thread Mel
On Monday 01 December 2008 19:32:59 Keith wrote: Have a machine, Dell dual CPU/quad core Xeon. Runs FBSD 6.2. Custom kernel, with IPFW compiled in and using SMP. FreeBSD hostname 6.2-RELEASE FreeBSD 6.2-RELEASE #1: Wed Jan 23 12:17:29 PST 2008 It runs, Dovecot, Postfix, Mysql, Apache.

Re: Page Fault.

2008-12-01 Thread Keith
On Mon, 1 Dec 2008, Mel wrote: |-On Monday 01 December 2008 19:32:59 Keith wrote: |- |- == |- kernel trap 12 with interrupts disabled |- |- Fatal trap 12: page fault while in kernel mode |- cpuid = 2; apic id = 02 |- fault virtual address = 0x104 |- fault code = supervisor

Re: Page Fault.

2008-12-01 Thread Mel
On Monday 01 December 2008 21:34:14 Keith wrote: On Mon, 1 Dec 2008, Mel wrote: |-On Monday 01 December 2008 19:32:59 Keith wrote: |- |- == |- kernel trap 12 with interrupts disabled |- |- Fatal trap 12: page fault while in kernel mode |- cpuid = 2; apic id = 02 |- fault virtual

Re: page fault while in kernel mode

2008-10-21 Thread John Baldwin
On Monday 20 October 2008 08:52:07 pm Robert Fitzpatrick wrote: On Mon, 2008-10-20 at 13:45 -0400, John Baldwin wrote: i386 cannot address more than 4GB unless the kernel is built with PAE mode enabled. This isn't enabled in GENERIC for many (justified) reasons. If you have more than

Re: page fault while in kernel mode

2008-10-21 Thread Robert Fitzpatrick
On Tue, 2008-10-21 at 12:03 -0400, John Baldwin wrote: Some drivers don't work with PAE (see all the 'nodevice' lines in /sys/i386/conf/PAE). You'll need to purge those drivers from your config. If you are using the hardware those drivers support, then you can't use PAE. Thanks for the

Re: page fault while in kernel mode

2008-10-21 Thread Jeremy Chadwick
On Tue, Oct 21, 2008 at 02:35:22PM -0400, Robert Fitzpatrick wrote: On Tue, 2008-10-21 at 12:03 -0400, John Baldwin wrote: Some drivers don't work with PAE (see all the 'nodevice' lines in /sys/i386/conf/PAE). You'll need to purge those drivers from your config. If you are using the

Re: page fault while in kernel mode

2008-10-21 Thread Robert Fitzpatrick
On Tue, 2008-10-21 at 11:47 -0700, Jeremy Chadwick wrote: The drivers which don't work are listed in the /sys/i386/conf/PAE file. They're prefixed by the word nodevice, which tells the kernel config reader DO NOT build this device, because it won't work. You will need to take the nodevice

Re: page fault while in kernel mode

2008-10-21 Thread John Baldwin
On Tuesday 21 October 2008 02:47:11 pm Jeremy Chadwick wrote: On Tue, Oct 21, 2008 at 02:35:22PM -0400, Robert Fitzpatrick wrote: On Tue, 2008-10-21 at 12:03 -0400, John Baldwin wrote: Some drivers don't work with PAE (see all the 'nodevice' lines in /sys/i386/conf/PAE). You'll need to

Re: page fault while in kernel mode

2008-10-21 Thread Robert Fitzpatrick
On Tue, 2008-10-21 at 15:09 -0400, John Baldwin wrote: Alternatively, you could just remove the 'device adv' line from your kernel config rather than adding lots of 'nodevice' lines at the bottom. You can usually do 'man 4 driver name' to see what devices it supports. In this case,

Re: page fault while in kernel mode

2008-10-21 Thread Jeremy Chadwick
On Tue, Oct 21, 2008 at 03:22:28PM -0400, Robert Fitzpatrick wrote: On Tue, 2008-10-21 at 15:09 -0400, John Baldwin wrote: Alternatively, you could just remove the 'device adv' line from your kernel config rather than adding lots of 'nodevice' lines at the bottom. You can usually do

Re: page fault while in kernel mode

2008-10-21 Thread John Baldwin
On Tuesday 21 October 2008 03:22:28 pm Robert Fitzpatrick wrote: On Tue, 2008-10-21 at 15:09 -0400, John Baldwin wrote: Alternatively, you could just remove the 'device adv' line from your kernel config rather than adding lots of 'nodevice' lines at the bottom. You can usually do

Re: page fault while in kernel mode

2008-10-20 Thread Robert Fitzpatrick
On Sun, 2008-10-19 at 13:16 -0700, Jeremy Chadwick wrote: On Sun, Oct 19, 2008 at 03:50:01PM -0400, Robert Fitzpatrick wrote: I took a working 5.4-i386 server and trying to convert its RAID 5 to RAID 10 and load 7.0 amd64. I kept getting BTX halted even after flashing the latest bios and

Re: page fault while in kernel mode

2008-10-20 Thread Jeremy Chadwick
On Mon, Oct 20, 2008 at 12:07:17PM -0400, Robert Fitzpatrick wrote: On Sun, 2008-10-19 at 13:16 -0700, Jeremy Chadwick wrote: On Sun, Oct 19, 2008 at 03:50:01PM -0400, Robert Fitzpatrick wrote: I took a working 5.4-i386 server and trying to convert its RAID 5 to RAID 10 and load 7.0

Re: page fault while in kernel mode

2008-10-20 Thread John Baldwin
On Monday 20 October 2008 12:32:37 pm Jeremy Chadwick wrote: Forgot to mention I added memory to this server as well, took it from 2GB it was using under 5.4-RELEASE up to 6GB filling all slots, that is why I wanted to load amd64. I reduced down to 4GB and now am able to install

Re: page fault while in kernel mode

2008-10-20 Thread Robert Fitzpatrick
On Mon, 2008-10-20 at 13:45 -0400, John Baldwin wrote: i386 cannot address more than 4GB unless the kernel is built with PAE mode enabled. This isn't enabled in GENERIC for many (justified) reasons. If you have more than 4GB, you should be using amd64, so you made the right decision

Re: page fault while in kernel mode

2008-10-19 Thread Jeremy Chadwick
On Sun, Oct 19, 2008 at 03:50:01PM -0400, Robert Fitzpatrick wrote: I took a working 5.4-i386 server and trying to convert its RAID 5 to RAID 10 and load 7.0 amd64. I kept getting BTX halted even after flashing the latest bios and firmware for the raid card, Intel SRCZCR, in this dual Xeon

Re: Page Fault - Wireless problem?

2006-02-23 Thread Mark Tinguely
Unread portion of the kernel message buffer: ural0: could not transmit buffer: SHORT_XFER Fatal trap 12: page fault while in kernel mode fault virtual address = 0x4 fault code = supervisor read, page not present instruction pointer = 0x20:0xc0667091 stack pointer

Re: Page fault in kernel mode, 6.0-RELEASE

2005-11-15 Thread Kris Kennaway
On Tue, Nov 15, 2005 at 11:48:15PM +0100, Guido Van Hoecke wrote: I am fairly new at FreeBSD. I installed a 'beastie' server with FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC but it traps immediately after the boot menu with

Re: Page fault in kernel mode, 6.0-RELEASE

2005-11-15 Thread Guido Van Hoecke
Kris Kennaway [EMAIL PROTECTED] writes: On Tue, Nov 15, 2005 at 11:48:15PM +0100, Guido Van Hoecke wrote: I am fairly new at FreeBSD. I installed a 'beastie' server with FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC but it traps

Re: page fault while in kernel mode

2005-10-25 Thread Kris Kennaway
On Mon, Oct 24, 2005 at 12:11:29PM +0100, Owen Smith wrote: Whats the best thing todo? debugging kernel etc or just upgrade to 5.4? The latter. A few hundred bugs were fixed between 5.3 and 5.4, and the former is no longer supported anyway. Kris pgpT4R8dnqxnu.pgp Description: PGP signature

Re: page fault while in kernel mode

2005-10-24 Thread stan
On Mon, Oct 24, 2005 at 12:11:29PM +0100, Owen Smith wrote: Whats the best thing todo? debugging kernel etc or just upgrade to 5.4? Run a memory est on the machine. memtest386 works well. -- U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong Terror - New York

Re: page fault error?

2004-03-25 Thread Matthew Seaman
On Wed, Mar 24, 2004 at 06:57:20PM -0500, chris wrote: Hello, I am having the following problem. About a week or so ago this started. My box running 4.9-STABLE keeps panicing and rebooting, below is an output of dmesg -a. Also i have tried to replace the memory and the hard drive is only 5