Nvidia drivers and mem.ko module

2004-08-31 Thread Ricardo Britto
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I'm running FreeBSD 5.2.1-RELEASE-p9 #3 on my machine and I'm having problems on installing nvidia-driver from ports. I get the following error: ERROR: Failed to load the NVIDIA module! KLD nvidia.ko: depends on mem - not available. That's

Re: 3Com Etherlink III ISA support [was Question]

2004-08-31 Thread Olaf Hoyer
On Mon, 30 Aug 2004, stheg olloydson wrote: I used that card in 2.2.2. (My first FBSD install!) As I remember, I had to run a 3Com DOS utility to set the physical parameters manually. Then I configured FreeBSD to use those settings. I would think later versions would support that card, as

Re: Strange error

2004-08-31 Thread Jack Raats
Sorry that was a typo. The ports and packages install the startup scripts in the right path, but still they are not started at bootup time. Googling gives a few url's with the same problem but not the solution :( Jack - Original Message - From: Subhro [EMAIL PROTECTED] To: [EMAIL

Re: maximum hard drive capacity supported?

2004-08-31 Thread Matthew Seaman
On Mon, Aug 30, 2004 at 06:19:48PM -0300, Fernan Aguero wrote: Now, in my case I don't need the new and bigger disk to be the bootable disk (i.e. I already have two drives that are sliced, partitioned and working fine). I just need it to be another disk to hold a /home or /scratch partition

vinum root issue on 5.3-Beta2

2004-08-31 Thread Chad Ziccardi
I'm working on setting up a mirrored root filesystem as explained in: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/vinum-root.html I've gotten it to boot then noticed something broken about it on my setup. More info on my setup is at the bottom of this message. If it boots to the

Multiple sockets running as threads

2004-08-31 Thread ashok . sivaprakasam
Hi All When I try to create receiver socket in multiple threads and make it to receive from multiple clients one thread becomes predominent and the other threads stops receiving from the client after that.This problems occurs when i try to send messages of size 1 m.b for each receiver

RE: xf86config for Toshiba satellite pro laptop

2004-08-31 Thread Vaughan Moore
Robert, Thanks so much! You're right, I mixed the numbers up! It's a 4260dvd. Anyway, I got X up and running. It took a lot of trial and error. The problem was 2 fold. First, there's a bug in sysinstall. I was getting a fail error message every time because sysinstall was looking for the

RE: xf86config for Toshiba satellite pro laptop

2004-08-31 Thread Vaughan Moore
Thanks Kevin! One of my problems was the listing for the savage driver and chipset were not working well together. Using the text version of the configuration program took the chipset line out when I selected the generic Savage driver. That fixed it! Thanks so much for your help! Vaughan

Re: newest kdelibs fails to build

2004-08-31 Thread Karel J. Bosschaart
On Tue, Aug 31, 2004 at 07:45:02AM +0530, Subhro wrote: First of all, ports like XFree86 and KDE are really not worth maintaining from the ports. Packages do much better for these Hm, that's a matter of personal preference. I prefer ports, despite the long compile times and the occasional

Re: Variable length packets?

2004-08-31 Thread Lucas (a.k.a T-Bird or bsdfan3)
I'll try using __attribute__ ((packed)) on the declaration of struct packet_t. - Original Message - From: Dan Nelson [EMAIL PROTECTED] To: Lucas (a.k.a T-Bird or bsdfan3) [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Monday, August 30, 2004 9:10 PM Subject: Re: Variable length packets?

Re: Strange error

2004-08-31 Thread Subhro
Login as root, /stand/sysinstall. Select configure. After that startup and make sure that there is check (err cross) mark next to startup dirs. Regards S. On Tue, 31 Aug 2004 10:09:27 +0200, Jack Raats [EMAIL PROTECTED] wrote: Sorry that was a typo. The ports and packages install the startup

[no subject]

2004-08-31 Thread Roy Joseph
Sir, When I was trying to install Free BSD from CD, I got a message as mentioned below. “Unable to get package / INDEX file from selected media” Why this message is displayed. How can we solve this problem? Please send a reply or documents to solve such problems. Yours faithfully ROY

Re: Which disk is which

2004-08-31 Thread Jud
On Tue, 31 Aug 2004 05:55:47 +0800, John [EMAIL PROTECTED] said: Kevin D. Kinsey, DaleCo, S.P. wrote: Hi, John ... As you cc'ed doc@, I'm sending your original mail to them also, so they'll have some background. Comments inline. John Summerfield wrote: I've booted a 5.2.1

Is any documents about freebsd Fix-it CD (disc2)?

2004-08-31 Thread joshua yu
hi, all: i found that there is a FIX-it CD with freebsd. but no documents found about it. is there any documents about it and tech me how to use it? thanks for your help. -- Joshua Yu MSN: joshuayuAThotmail.com YAHOO MESSENGER: cigant - Do You Yahoo!? 150MP3

Re:

2004-08-31 Thread Subhro
Did you select your installation media to be CDROM? If yes then probably it is a misburnt CD. Try reburning the CD and it will work. Regards S. On Tue, 31 Aug 2004 05:04:28 -0700 (PDT), Roy Joseph [EMAIL PROTECTED] wrote: Sir, When I was trying to install Free BSD from CD, I got a message

Re: Is any documents about freebsd Fix-it CD (disc2)?

2004-08-31 Thread Subhro
A fixit Cd is a special media which contains a LIVE FreeBSD filesystem. If your system refuses to boot due to some reason, then you can use the fixit CD to boot into the system and fix it. For using the FIXIT CD, boot from the regular CDROM (ie the first cd) and select to repair the installation.

freebsd-security-announce

2004-08-31 Thread Moti Levy
is this list active ? i am subscribed to it but received no emails from it in the past three months . anyone knows ? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

Re: freebsd-security-announce

2004-08-31 Thread Matthew Seaman
On Tue, Aug 31, 2004 at 08:44:43AM -0400, Moti Levy wrote: is this list active ? i am subscribed to it but received no emails from it in the past three months . anyone knows ? It doesn't appear in the list of FreeBSD mailing lists at: http://lists.freebsd.org/mailman/listinfo which

Re: freebsd-security-announce

2004-08-31 Thread Moti Levy
Matthew Seaman wrote: On Tue, Aug 31, 2004 at 08:44:43AM -0400, Moti Levy wrote: is this list active ? i am subscribed to it but received no emails from it in the past three months . anyone knows ? It doesn't appear in the list of FreeBSD mailing lists at:

java install errors

2004-08-31 Thread Chip
After letting the build of java run all night I got these error 2's (here's the end snippet of code) - Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location /usr/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java/util/CurrencyData.java:1:

Fwd: Re: Which disk is which

2004-08-31 Thread Jud
It seems we have a volunteer. ;-) Devon forgot to cc the list and has asked me to forward this. I snipped a bit near the beginning (hope that's OK with you, Devon). Jud On Tue, 31 Aug 2004 14:42:03 +0200, Devon H. O'Dell [EMAIL PROTECTED] said: Jud [EMAIL PROTECTED] scribbled: On Tue, 31

Re: newest kdelibs fails to build

2004-08-31 Thread Steven Friedrich
I failed to mention that I'm running 4.10-STABLE on this box. Also, I have a second box and I cvsupped it and it fails to build kdelibs too. Only THIS time, I simply went to the port directory, i.e., /usr/ports/x11/kdelibs3 and invoked make. On the other system, I followed the procedures in

VPN poptop

2004-08-31 Thread lycanthrope
Hello! I'm using pptpd (PoPToP) on my server to enable clients on LAN to access internet (DSL connected to ethernet card on server). That works perfectly. Users dial VPN to the server,log in and can surf freely. Now, I would like to enable internet users to access LAN resources. Server has a

Re: init: not found in path...panic:no init

2004-08-31 Thread John Murphy
oscar wicks [EMAIL PROTECTED] wrote: Joseph and bsd guys: hello,i have a very old toshiba t4600c (386, 33Mhz, 200Mb Hd. 8 MbRAM, no LAN, just serial port and floppy drive.) i supose that that is enough for mini install freebsd 4.10 , but everything goes fine until toshiba asks for

Re: OpenGL development on FreeBSD

2004-08-31 Thread Henrik W Lund
Doug Poland wrote: Hello, I've got a friend that's a C++/OpenGL hacker. He's got a nifty OpenGL app that he wants to port to FreeBSD. I've no experience with OpenGL development on FBSD. Are there any OpenGL developers out there that can point me to FAQs or docs that are necessary to work in

Renaming files using find

2004-08-31 Thread Gerard Samuel
Im trying to rename a few files with the .dist extension. Im trying - hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \; And Im getting - cp: ./html.php.dist and ./html.php.dist are identical (not copied). cp: ./horde.php.dist and ./horde.php.dist are identical (not copied). cp:

Re: Nvidia drivers and mem.ko module

2004-08-31 Thread Henrik W Lund
Ricardo Britto wrote: Hi, I'm running FreeBSD 5.2.1-RELEASE-p9 #3 on my machine and I'm having problems on installing nvidia-driver from ports. I get the following error: ERROR: Failed to load the NVIDIA module! KLD nvidia.ko: depends on mem - not available. That's saying about mem.ko module.

autotools cleanup - must have missed it...

2004-08-31 Thread Ben Paley
Hello, I managed to miss the advice everyone else seems to have had about autotools cleanup: how do I go about sorting this out? Here's the output of pkgdb -F: --- Checking the package registry database Stale origin:

Re: Renaming files using find

2004-08-31 Thread Giorgos Keramidas
On 2004-08-31 11:15, Gerard Samuel [EMAIL PROTECTED] wrote: Im trying to rename a few files with the .dist extension. Im trying - hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \; And Im getting - cp: ./html.php.dist and ./html.php.dist are identical (not copied). cp:

opiekeys and IMAP

2004-08-31 Thread Chris
Hi all, Having trouble with security features, I think, that I can't seem to resolve. I have a fresh install of 4.10 from FTP and am trying to set up Cyrus IMAP with Squirrelmail front end. I was following the guide at http://www.cse.ucsc.edu/~venkat/tutorial1.html, more for reference to FreeBSD

RE: VPN poptop

2004-08-31 Thread Andras Kende
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of lycanthrope Sent: Tuesday, August 31, 2004 8:02 AM To: [EMAIL PROTECTED] Subject: VPN poptop Hello! I'm using pptpd (PoPToP) on my server to enable clients on LAN to access internet (DSL connected to

Re: opiekeys and IMAP

2004-08-31 Thread Luke Kearney
On Tue, 31 Aug 2004 08:38:46 -0700 Chris [EMAIL PROTECTED] spake thus: Hi all, Having trouble with security features, I think, that I can't seem to resolve. I have a fresh install of 4.10 from FTP and am trying to set up Cyrus IMAP with Squirrelmail front end. I was following the guide at

Re: OpenGL development on FreeBSD

2004-08-31 Thread Miguel Mendez
On Tue, 31 Aug 2004 17:10:26 -0700 Henrik W Lund [EMAIL PROTECTED] wrote: Hi, Having hacked some OpenGL on FreeBSD myself, I found www.opengl.org to be helpful (the obvious one, perhaps), as well as NeHe's tutorials over on nehe.gamedev.net Yes, those tutorials are excellent. Kilgard's

Re: opiekeys and IMAP

2004-08-31 Thread Chris
On Wed, 01 Sep 2004 00:44:03 +0900, Luke Kearney [EMAIL PROTECTED] Here are the /etc/opie* Permissions: -rw--- 1 root wheel 466 Aug 30 16:27 opieaccess -rw-r--r-- 1 root wheel 200 Aug 30 16:33 opiekeys If this is where the information is kept then perhaps you would either

CVSup on current branch questions.

2004-08-31 Thread Tom Connolly
I just installed FreeBSD 5.2.1 and I'm a little confused about the branches. From my research I have deduced that this is a current branch and that there is no stable branch. Is this correct? I would like to CVSup the most stable version of 5.2.1 source as well as the ports. Can someone explain

Mac filtering with ipfw2

2004-08-31 Thread Steve Quezadas
Hello, I have tried and tried and tried to get mac filtering to work with ipfw2. I have tried the usual sources (Google Groups, google, mailling list, man pages, etc). Here it goes: I basically want to allow traffic to come from one mac address. I am trying to get the following rule to work:

FTP server

2004-08-31 Thread lycanthrope
Hello! I'm trying to set up FTP server. I enable the line in inetd, created a user ftp in group ftp. now, the ftp user and anonymous can log into FTP, and download. BUT, anonymous user can ALSO UPLOAD. how to restrict anonymous account to downloading only? thank you very much!

Endace Network Cards in 4.x

2004-08-31 Thread eric
Has anyone used Endance gig-e network cards under 4.9 or 4.10? We've got a couple, but I wanted to know what type of headaches (if any) I'll be looking at when swapping our current fiber cards. Thanks.. - eric ___ [EMAIL PROTECTED] mailing list

Re: CVSup on current branch questions.

2004-08-31 Thread Matthew Seaman
On Tue, Aug 31, 2004 at 10:02:05AM -0600, Tom Connolly wrote: I just installed FreeBSD 5.2.1 and I'm a little confused about the branches. From my research I have deduced that this is a current branch and that there is no stable branch. Is this correct? I would like to CVSup the most stable

Re: FTP server

2004-08-31 Thread Matthew Seaman
On Tue, Aug 31, 2004 at 06:03:02PM +0200, lycanthrope wrote: I'm trying to set up FTP server. I enable the line in inetd, created a user ftp in group ftp. now, the ftp user and anonymous can log into FTP, and download. BUT, anonymous user can ALSO UPLOAD. how to restrict anonymous account to

5.x - which to install? (Was Re: LDAP, pam, nss)

2004-08-31 Thread Curtis Vaughan
On 30 Aug, 2004, at 22:16, Konrad Heuer wrote: On Mon, 30 Aug 2004, Curtis Vaughan wrote: In order to get centralized logins to work on my Linux Debian computers (authenticating of a RedHat Samba server), I have to: install libnss-ldap libpam-ldap. Perform some configuration on the of

Re: java install errors

2004-08-31 Thread T Kellers
I have (had) exactly that same error on an 8-27-2004 clean build of RELENG-5. I was pressed for time, though, and just went to another similar RELENG-5 box (that had jdk already installed) and pkg_create -b a jdk package archive. It installed fine on the machine where the build had failed.

Re: Renaming files using find

2004-08-31 Thread Gerard Samuel
Giorgos Keramidas wrote: On 2004-08-31 11:15, Gerard Samuel [EMAIL PROTECTED] wrote: Im trying to rename a few files with the .dist extension. Im trying - hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \; And Im getting - cp: ./html.php.dist and ./html.php.dist are identical (not

Trying to install 5.3-Beta

2004-08-31 Thread David E. Meier
Hi folks, I thought I'd give 5.3-Beta a try on a P4 and Intel board. Installation (without X) goes smooth until I exit sysinstall for the first boot. The system stops and prompts with the following output. I tried twice to install it with different outcome: 1st try: [thread 13] Stopped at

RE: java install errors

2004-08-31 Thread Steve Hodgson
Java HotSpot(TM) Client VM warning: Can't detect initial thread stack location /usr/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java /util/Curr ency Data.java:1: 'class' or 'interface' expected Java HotSpot(TM) Client VM warning: Can't detect initial thread

Regex with dump/restore not working

2004-08-31 Thread Karl Heller
I'm trying to do something very simple, that is, restore just mp3 files from a set of tapes. However, none of the expressions I'm using will work.. restore -tvNf /dev/nsa1 expression; where epxressions I have tried are *mp3 *.mp3 .*mp3 ^*.mp3 ^*.mp3$ ^.*mp3$ It seems any expression consisting of

Installation problem

2004-08-31 Thread calebsbc
Hi I am trying to install freebsd5.3 beta1 on my Toshiba Dynabook PIII with 240mb ram and 40 gb hdd but every time the initial boot gets to the USB driver it stops (freeze) the only thing I can do is hold down the power button 5 secs. I have tried running with acpi disabled and tried to disable

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread Danny Mayer
At 11:15 PM 8/30/2004, W. D. wrote: Hi Danny, Reply below... At 19:02 8/30/2004, Danny Mayer wrote: At 07:13 PM 8/30/2004, W. D. wrote: 30 Aug 21:50:05 ntpd[88]: logging to file /var/log/ntpd.log 30 Aug 21:50:05 ntpd[88]: ntpd [EMAIL PROTECTED] Mon Aug 30 14:14:07 GMT 2004 (1) 30 Aug 21:50:05

nppd.so acrobat plugin hangs epiphany

2004-08-31 Thread Frank DiPrete
Hello I am using nppd.so ad aplugin for PDF files in Epiphany. Plugin installed from ports (pluginwrapper) Epiphany 1.06 FreeBSD 5.2.1 Flash plugin works great, Acrobat reader works great by itself. When I attempt to view a PDF file in epiphany from a URL, nppd.so attempts to launch acrobat

RE: java install errors

2004-08-31 Thread Randy Grafton
Not to beat a dead horse but here are a couple of extra points to offer. From a Base/Minimal install of 5.2.1 I got a current ports tree with cvsup-without-gui. Next, I install linux-base: cd /usr/ports/emulators/linux-base make install clean edit /etc/rc.conf to contain

Installing on Compaq DL380 with IDA RAID

2004-08-31 Thread Doug Poland
Hello, I'm having a problem installing 5.3-BETA2 on this box with a Compaq Integrated SMART Array Controller. The install CD detects the array and I can partition, label, and install 5.3-BETA2 through the post- install configuration. However, when I reboot, the OS tells me, something to the

Re: newest kdelibs fails to build

2004-08-31 Thread Donald J. O'Neill
Hi Steven, It looks to me like you may be missing something in your make.conf file. I use: CFLAGS= -O -pipe COPTFLAGS= -O -pipe And If you're just upgradeing KDE to 3.3, you can use: BATCH=yes Run pkgdb -fF and straighten out any bad dependencies. When I did the upgrade, after following

Re: Mac filtering with ipfw2

2004-08-31 Thread Charles Swiger
On Aug 31, 2004, at 12:07 PM, Steve Quezadas wrote: I basically want to allow traffic to come from one mac address. I am trying to get the following rule to work: ipfw add accept tcp from any to any MAC any 10:20:30:40:50:60 OK, that looks about right. Yes, ipfw2 is on my freebsd system. This rule

FreeBSD on external Hard Disk

2004-08-31 Thread Olivier Renard
Hello, I am new to FreeBSD, hence this question regarding the installation of FreeBSD 5.2.1 on an external hard disk. I was considering buying a Maxtor One-Touch (USB and FireWire, 80GB) to install FreeBSD 5.2.1 on it. I already have Windows XP Pro and Fedora Core 2 installed on an Acer

Re: Mac filtering with ipfw2

2004-08-31 Thread Christian Hiris
On Tuesday 31 August 2004 18:07, Steve Quezadas wrote: Hello, I have tried and tried and tried to get mac filtering to work with ipfw2. I have tried the usual sources (Google Groups, google, mailling list, man pages, etc). Here it goes: I basically want to allow traffic to come from one mac

Re: freebsd-security-announce

2004-08-31 Thread Radek Kozlowski
On Tue, Aug 31, 2004 at 09:02:23AM -0400, Moti Levy wrote: It doesn't appear in the list of FreeBSD mailing lists at: http://lists.freebsd.org/mailman/listinfo which suggests that it has gone the way of all flesh. Perhaps [EMAIL PROTECTED] or [EMAIL PROTECTED] would serve you better.

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread W. D.
Thanks for looking into this, Danny! Reply below... At 12:49 8/31/2004, Danny Mayer, wrote: At 11:15 PM 8/30/2004, W. D. wrote: Hi Danny, Reply below... At 19:02 8/30/2004, Danny Mayer wrote: At 07:13 PM 8/30/2004, W. D. wrote: 30 Aug 21:50:05 ntpd[88]: logging to file /var/log/ntpd.log 30

Lateral Files Available

2004-08-31 Thread Michael Krause
If you would like to unsubscribe from this list, please click on the link at the bottom of the Email...this is the only way to be removed from this list If you would like to stay subscribed to this list, you do not need to do a thing.

Re: newest kdelibs fails to build

2004-08-31 Thread Steven Friedrich
Thanks for the info. I added CFLAGS and COPTFLAGS to my make.conf, but it still fails to build kdelibs on two machines. This looks like a valid build break to me. Did you build it on 4.x or 5.x? I suspect it's due to the compiler on 4.x. Did the KDE port team build it on 4.10-STABLE? On

Re: java install errors

2004-08-31 Thread Dick Davies
* Chip [EMAIL PROTECTED] [0807 14:07]: After letting the build of java run all night I got these error 2's (here's the end snippet of code) - have you got a linprocfs mounted? -- Loud burping while walking around the airport is prohibited in Halstead, Kansas. Rasputin :: Jack of All Trades

Re: newest kdelibs fails to build

2004-08-31 Thread Tilman Linneweh
* Steven Friedrich [Di, 31 Aug 2004 at 22:26 GMT]: I suspect it's due to the compiler on 4.x. Did the KDE port team build it on 4.10-STABLE? Yes we did. You can try to install the package from http://rabarber.fruitsalad.org/index.html#a_4-STABLE Your compile fails because there is a bogus

Supported motherboards? (Abit IS7?)

2004-08-31 Thread Erik Johnsson
I'm building myself a new desktop, and I'm wondering wether this motherboard will work with FreeBSD 5.x? http://www2.abit.com.tw/page/se/motherboard/motherboard_detail.php?pMODEL_NAME=IS7fMTYPE=Socket%20478pPRODINFO=Specifications I'm wondering if the onboard sound will work with FreeBSD. It

Re: FreeBSD on external Hard Disk

2004-08-31 Thread Subhro
The installation to external hard disk is exactly the same as if you had another internal drive. Only the external Hard disk will show up as da0 and you need to keep an eye on which drive you are partitioning. Select to install the Boot Manager in the MBR when sysinstall asks for it. alternative

Re: Supported motherboards? (Abit IS7?)

2004-08-31 Thread Subhro
Yeh that board works with FreeBSD 5.2.1-R-p9. However you need to reflash the latest BIOS as the ACPI seems to be broken and yes the sound DOES work. You need a rebuild of the kernel though. Regards S. On Tue, 31 Aug 2004 22:57:29 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: I'm building

Re: Supported motherboards? (Abit IS7?)

2004-08-31 Thread Subhro
On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: On Wed, Sep 01, 2004 at 02:32:52AM +0530, Subhro wrote: Yeh that board works with FreeBSD 5.2.1-R-p9. However you need to reflash the latest BIOS as the ACPI seems to be broken and yes the sound DOES work. You need a

Re: OpenGL development on FreeBSD

2004-08-31 Thread Henrik W Lund
Miguel Mendez wrote: On Tue, 31 Aug 2004 17:10:26 -0700 Henrik W Lund [EMAIL PROTECTED] wrote: snip All modern toolkits allow integration with OpenGL these days, be it SDL or GTK+/Qt if you need something more feature rich. I see little reason not to use them. Just my $0.02 I'll most

Re: newest kdelibs fails to build

2004-08-31 Thread Donald J. O'Neill
I took this from the announcement on the ports list: Packages are available for i386 for 4-STABLE and 5-CURRENT (5.3-BETA) from http://rabarber.fruitsalad.org Did you run pkgdb -fF? As I said before, I had to fix the broken dependencies on kdelibs and kdepim before portupgrade -pv kde\*

Re: Supported motherboards? (Abit IS7?)

2004-08-31 Thread Subhro
On Tue, 31 Aug 2004 23:08:24 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: On Wed, Sep 01, 2004 at 02:36:52AM +0530, Subhro wrote: On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: On Wed, Sep 01, 2004 at 02:32:52AM +0530, Subhro wrote: Yeh that board works with

Re: Supported motherboards? (Abit IS7?)

2004-08-31 Thread Subhro
On Wed, 1 Sep 2004 02:43:04 +0530, Subhro [EMAIL PROTECTED] wrote: On Tue, 31 Aug 2004 23:08:24 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: On Wed, Sep 01, 2004 at 02:36:52AM +0530, Subhro wrote: On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson [EMAIL PROTECTED] wrote: On Wed, Sep 01,

Re: burncd problem err=16 any ideas?

2004-08-31 Thread Subhro
On Tue, 31 Aug 2004 16:05:13 -0500, michael [EMAIL PROTECTED] wrote: Im pretty sure Im using a 40 conductor type, as for using the same cable for a Hard drive then cd rom they have there own separate cables, Primary goes to the hard drive, secondary is to the cd rom and i dont use a floppy.

Re: burncd problem err=16 any ideas?

2004-08-31 Thread Subhro
On Wed, 1 Sep 2004 02:50:36 +0530, Subhro [EMAIL PROTECTED] wrote: On Tue, 31 Aug 2004 16:05:13 -0500, michael [EMAIL PROTECTED] wrote: Im pretty sure Im using a 40 conductor type, as for using the same cable for a Hard drive then cd rom they have there own separate cables, Primary goes to

-DNOPROFILE ?

2004-08-31 Thread Geert Hendrickx
What exactly does this make.conf-flag do: NOPROFILE= true# Avoid compiling profiled libraries What are profiled libraries? GH ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe,

Re: newest kdelibs fails to build

2004-08-31 Thread Steven Friedrich
Yes, I ran pkgdb -F (I didn't use f, don't know what it's for yet). I fixed those dependencies. And yep, I have Qt 3.3.3 I'll have to look at arts... On Tuesday 31 August 2004 05:12 pm, Donald J. O'Neill wrote: I took this from the announcement on the ports list: Packages are available for

Re: opiekeys and IMAP

2004-08-31 Thread Chris
On Tue, 31 Aug 2004 08:58:55 -0700, Chris [EMAIL PROTECTED] wrote: On Wed, 01 Sep 2004 00:44:03 +0900, Luke Kearney [EMAIL PROTECTED] Here are the /etc/opie* Permissions: -rw--- 1 root wheel 466 Aug 30 16:27 opieaccess -rw-r--r-- 1 root wheel 200 Aug 30 16:33 opiekeys If

Problem with building ngircd from the ports

2004-08-31 Thread Martin Hasenbein
Hi everybody, I just installed ngircd and it really runs fine. Just as I like it :-) But I ran into some trouble, when I tried to activate IDENT. My system is a FreeBSD 4.10. If I try to install from the port or from source, I get the following error (right now from port): $ make -DWITH_IDENT

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread Harlan Stenn
If you cannot use FTP it is because there were Serious Hacking attempts aimed at UDel from that netblock. You will have to use http instead. H ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To

Re: 3Com Etherlink III ISA support [was Question]

2004-08-31 Thread horio shoichi
On Mon, 30 Aug 2004 19:28:03 -0700 (PDT) stheg olloydson [EMAIL PROTECTED] wrote: it was said: the version of FreeBsd that i've tried does not support the network card i have on the computer which is a 3Com Etherlink III ISA (3C509b-TPO) in PnP mode i would like to know which versions of

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread W. D.
At 17:16 8/31/2004, Harlan Stenn, wrote: At 14:57 8/31/2004, W. D., wrote: For some reason, I can't get to the UDel.edu FTP site. Do you happen to know why? ftp://ftp.udel.edu/pub/ntp/ntp4/ If you cannot use FTP, it is because there were Serious Hacking attempts aimed at UDel from that

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread W. D.
Thanks for the info, Brad. Reply below... [EMAIL PROTECTED] wrote: W. D. [EMAIL PROTECTED] wrote: FreeBSD appears to expect these NTP programs to be in: /usr/sbin/ That is where the 2003 Oct port put them. That's because the FreeBSD port specification modifies the default

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread Brad Knowles
At 5:59 PM -0500 2004-08-31, W. D. wrote: Do you have any idea how to get in touch with whoever is the FreeBSD port maintainer for NTP? On a FreeBSD machine we use to help support the NTP Project, in /usr/ports/net/ntp, looking in the Makefile, I see: MAINTAINER= [EMAIL

How to use NAS???

2004-08-31 Thread Gary Kline
I've been trying to configure festival here on tao to be more familiar with it and be able to use it as a speech synth'z'r on my laptop. I run into a 'Can't access NAS error (ENOENT??) after I try to have the program issue a test string. A gengtleman at

PXE Questions

2004-08-31 Thread admin2
I'm starting to use PXE to install FreeBSD servers, something I've been doing with Linux for a while. I've got installs working, but I'm running into a few flexibility issues I hope have been addressed. While I use DHCP to install the server, the server should not attempt to boot DHCP when

Customizing a release

2004-08-31 Thread ctodd
I'm looking for information on how to properly customize a FreeBSD distribution when using the make release framework. I've made some attempts to include a custom kernel in my own release, but this kernel never makes it's way into the staging area (i.e. ftp distribution). The documentation on the

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread Danny Mayer
At 06:37 PM 8/31/2004, W. D. wrote: At 17:16 8/31/2004, Harlan Stenn, wrote: At 14:57 8/31/2004, W. D., wrote: For some reason, I can't get to the UDel.edu FTP site. Do you happen to know why? ftp://ftp.udel.edu/pub/ntp/ntp4/ If you cannot use FTP, it is because there were Serious Hacking

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread Danny Mayer
At 03:57 PM 8/31/2004, W. D. wrote: The Windows computer generating the Tardis NTP broadcasts is at IP address: 192.168.2.119. Does anyone have any idea why it's not picking up these broadcasts? Also, that's not a broadcast address as I recall. It's the internal, NAT address, that my DHCP

OT: Nachos - simulated OS

2004-08-31 Thread parv
Has anybody successfully compiled used Nachos on FreeBSD 4.x, a simulated OS? If so, could you please share the script? Some information is here... http://www.cs.washington.edu/homes/tom/nachos/ http://kakugawa.aial.hiroshima-u.ac.jp/lecture/2000/ASE1/Handouts/overview.html I suppose i am

EsperNET IRC

2004-08-31 Thread Arizona Uplink
Greetings! I've noticed that a group has initiated an IRC support channel on freenode for FreeBSD. I would like to extend the courtesy of starting one on irc.esper.net, which is growing on a rather nice incline. I currently have it registered, but would like to extend the invitation to expand

Can't boot

2004-08-31 Thread Phil Thomson
Hi all, Just installed FreeBSD on a Pentium 150 I found in the garbage (!), and it seems the installation went fine, but I cannot boot. I had to use the boot floppies to start the installation, so I used those to boot from to try and figure out how to configure the boot options in sysinstall,

Re: Can't boot

2004-08-31 Thread Subhro
I assume that you are installing *only* FreeBSD on the Pentium and not multibooting it. Did you select to install the standard MBR or did u select to leave he MBR untouched? What happens when you try to boot the system fromthe hadr drive? Regard S. On Wed, 1 Sep 2004 02:49:51 + (UTC), Phil

Re: ntpd as broadcastclient - not working?

2004-08-31 Thread W. D.
Hi Danny, Thanks again for your reply. More... At 21:15 8/31/2004, Danny Mayer, wrote: At 06:37 PM 8/31/2004, W. D. wrote: At 17:16 8/31/2004, Harlan Stenn, wrote: At 14:57 8/31/2004, W. D., wrote: For some reason, I can't get to the UDel.edu FTP site. Do you happen to know why?

Re: OT: Nachos - simulated OS

2004-08-31 Thread stheg olloydson
it was said: I suppose i am feeling lazy to compile gas, binutils, gcc (which would make the 3d instance) from source to be cross-compile-able due to lack of a port. Speaking of which ... Nachos has been reported to be ported to FreeBSD, btw. (Hint, Hint.) Hello, Did you read the entire page

does java needs linux base?

2004-08-31 Thread Jorge Mario G.
Hi there I built the native java from ports and I see it uses the linux_base which I dont want because I'm running out of space can I remove it??? completely?? and how by the way I mean all the linux_base and itss dependencies Jorge =

trouble compiling the kernel

2004-08-31 Thread Bob Ababurko
Hello all- I am trying to recompile my kernel to make use of dummynet per the instruction in the handbook and I am getting this error output and cannot make use of it. I am calling my edited config file DUMMYNET, fyi. bash-2.05b# make buildkernel KERNCONF=DUMMYNET

Re: trouble compiling the kernel

2004-08-31 Thread Abdul Rf
Hello Bob, Try this one. cd /usr/src/usr.sbin/config make make install and try again to build your kernel. regards, abdul rf Wednesday, September 1, 2004, 11:45:28 AM, you wrote: BA Hello all- BAI am trying to recompile my kernel to make use of dummynet per the BA instruction

Question::page fault::vm:::encrypt and decrypt file data

2004-08-31 Thread Pine Ful
hi, Q1: How to produce a page fault? Q2: How translate physical memory address into virtual memory address? Because phys addr is 64 bit and virtual addr is 32 bit. Q1 description:: I have succeed to add hook in vfs layer to encrypt file data before write and decrypt file data after

Re[2]: trouble compiling the kernel

2004-08-31 Thread Abdul Rf
Dear Bob, sorry, don't forget to backup your file config. cp /usr/sbin/config /usr/sbin/config.orig if you still have problem, send your configuration file (/sys/i386/config/DUMMYNET ??). regards, Abdul Rf AR Hello Bob, AR Try this one. AR cd /usr/src/usr.sbin/config AR make

Re: Can't boot

2004-08-31 Thread Phil Thomson
I assume that you are installing *only* FreeBSD on the Pentium and not multibooting it. Did you select to install the standard MBR or did u select to leave he MBR untouched? What happens when you try to boot the system fromthe hadr drive? Yes, FreeBSD is to be the only system on the machine. I