In a message dated 9/25/04 4:12:52 PM Eastern Daylight Time, [EMAIL PROTECTED]
writes:
FreeBSD team for developing a stack that uses no resources.
For the record, what I was saying was that a decent machine (e.g. 2.4
PIV) should be able to push 200,000 packets per second with
Hello-
I am trying to configure the serial ports on a bunch of machines to be
hooked up to a terminal server...baynetworks Annex to be exact. I am
running FreeBSD 5.2.1 on an i386 machine with an Inter n440bx board.
These motherboards are pretty common and found on early VA linux
In a message dated 9/25/04 4:24:07 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
The EVIDENCE is to the contrary, since it seems that a 2.4Ghz system
will be saturated when bridging ~250Kpps with device-polling enabled,
based on polling stats and userland benchmarking, even though the
Try using rndc -s server ip status
In Bind9 all controls have been turned over to the r/ndc system.
On Thu, 23 Sep 2004 02:04:30 -0500, Kyle S. Allender
[EMAIL PROTECTED] wrote:
Hello.
This is potentially a stupid question, but is there a known issue with the
rc script which controls named
In a message dated 9/27/04 3:04:22 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Mike at sentex.net previously wrote:
Given a decent CPU, you wont see very much of a load average at all in the
200Kpps / 100Mb range.
Note that load average and CPU usage are two intirely different
On Sep 27, 2004, at 11:39, Nico Meijer wrote:
Regular folks don't understand how mail works. They have no clue
whatsoever. They don't _want_ to have a clue either. They are just
behaving like consumers, again. Do you *really* want to know what's on
your plate at dinner? ;-) I do, maybe you too,
Hi Gang,
I have a document with numbered paragraphs, the numbers
to the far left of each paragraph. Is there a perl
s/NNN/BNNN//BBR/g means I can use from the CL or
as a script to make this doc more easy (for me) to read.
The document is
On Wed, 22 Jan 2003 10:11:02 -1000 (HST), Vincent Poy
[EMAIL PROTECTED] wrote:
On Wed, 22 Jan 2003, Kirk R. Wythers wrote:
I just ran into a problem trying to install the 5.0 world. I thought I
checked and had 30M free on / before I started this. However, after
building, the world,
Nico Meijer [EMAIL PROTECTED] wrote:
Hey Bill,
Black mode is on, here. ;-)
I'm not familiar with that metaphor.
Are you saying that it's better for users not to know that their mail
has been delayed?
Unfortunately, yes. That is what I am saying.
On a technical level, I totally
Hi Doug,
Point taken. Wrong example, imho, but point taken. ;-)
They will have no problem
convincing Joe Sub-Average juror (of which there will be more than
enough to go around) that you were the cause of Joe Average computer
users' loss of his entire retirement savings.
I have just enough
At 12:58 PM 9/27/2004 -0700, you wrote:
4. Make sure the configuration file of your kernel has appropriate
flags set for COM1 (sio0).
where I should be seeing or adding a line such as :
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
You should add that to the kernel configuration
So, let me get this straightI am going to add:
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
to the kernel configuration, aka the GENERIC file in /usr/src/sys/i386/conf
if the
system is not customized at all?
What you are doing is to tell the kernel what he needs to do to
At 01:24 PM 9/27/2004 -0700, David Rio Deiros wrote:
So, let me get this straightI am going to add:
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
to the kernel configuration, aka the GENERIC file in
/usr/src/sys/i386/conf
if the
system is not customized at all?
What you are doing
ive installed 3ddesktop 0.2.7 from ports
im running x.org 6.7 on a 386 box with a voodoo 3 2000 box.. I have
tdfx.ko loaded and
dmesg reports
info: [drm] Initialized tdfx 1.0.0 20010216 on minor 0
but when I run 3ddesk, I get
[EMAIL PROTECTED] 3ddesk
Attempting to start 3ddesktop server.
Hey Fellas,
Whenever I do an apache upgrade - whether it be apache 1.3 or apache 2,
it always spews all these index.html.language files in my web root that
I have to go in and remove - but more annoyingly it overwrites my certs
in /usr/local/etc/apache[2]/ssl.*. What gives?
There a command
On Mon, Sep 27, 2004 at 01:56:27AM -0400, bsdfsse wrote:
I started running FreeBSD because a friend of mine is going to run a
website on 4.10-STABLE. Someone had told him that 4.x was safer to
run than 5.x.
Recently I had a hardware problems on one of my machines that is forcing
me to
config: /usr/src/sys/i386/conf/GENERIC:279: devices with zero units are not
likely to be correct
What file do I add this line to?:
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
Check out this thread:
http://www.webservertalk.com/archive77-2004-1-50488.html
On Mon, Sep 27, 2004 at 01:38:15PM -0600, Bill Moran wrote:
snip
When I have a choice of punishing idiots or smart people, I punish
idiots.
This is excellent. It should be on a bumper sticker or something.
snip
Look at the vehicle situation. If people would force stupid drivers
to
Kris Kennaway wrote:
On Mon, Sep 27, 2004 at 10:16:38AM +0200, Albert Shih wrote:
32 sec to do
cd /usr/src
time find . -type f -print /dev/null
and on other computer I just need 0.8 sec to do that.
I don't believe that, unless you already have all of /usr/src in
cache. 32 seconds
How about something like (assuming space between numbering and paragraph
is a tab):
perl -pi -e 's,^(\d)\t,B$1/BBR,' filename
Atle
-
Flying Crocodile Inc, Unix Systems Administrator
___
[EMAIL PROTECTED] mailing list
I have a USB Sony Clie PEG-SJ20 which I have gotten to Sync with jpilot.
However the processes that are run when the Clie is attached continue to
run even after the Clie is detached. The processes are spawned from
usbd.conf with the attach option and should be killed by the detach
options. None
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Matthew Seaman
Sent: Monday, September 27, 2004 2:22 AM
To: Tim Aslat
Cc: [EMAIL PROTECTED]
Subject: Re: IP address conflicts
On Mon, Sep 27, 2004 at 08:51:47AM +0930, Tim Aslat wrote:
I have an
Thomas Moyer writes:
#!/bin/sh
/usr/bin/killall ppp
This may not be the correct tool - see man pppctl.
Robert Huff
___
[EMAIL PROTECTED] mailing list
On Mon, Sep 27, 2004 at 07:14:57PM -0500, Kevin D. Kinsey, DaleCo, S.P. wrote:
Kris Kennaway wrote:
On Mon, Sep 27, 2004 at 10:16:38AM +0200, Albert Shih wrote:
32 sec to do
cd /usr/src
time find . -type f -print /dev/null
and on other computer I just need 0.8 sec to do that.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of russell
Sent: Sunday, September 26, 2004 10:36 PM
To: bsdfsse
Cc: [EMAIL PROTECTED]
Subject: Re: IP address conflicts
or use a tool like arpwatch that is specifically designed to let you
know when
Good day!
I have two workstations at work, 1 my personal, and
the other, a test machine.
My boss told me to configure a pcrouter, that is, the
testmachine and let my personal pc connect through the
internet through the testmachine:
Here's the scenario:
The testmachine already knows how to
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tim Aslat
Sent: Sunday, September 26, 2004 9:50 PM
I agree, and this is what we are trying to do. However a school with
20+ buildings, and 1000+ network points and a considerable number of
switches
Am Montag, 27. September 2004 13:42 schrieb Omer Faruk Sen:
Hi,
I need some suggestions (and maybe URL if you send) for Single Board
Computers that runs FreeBSD without any problem.
I am sure there are lots of people here that use FreeBSD on a SBC for
different purposes. Can you point me
In the immortal words of Ted Mittelstaedt [EMAIL PROTECTED]...
And, let me guess, most switches purchased at different times,
different models,
different number of ports, etc.
Very much so.
And all of them on a single network, not broken up into small subnets
- that is the first mistake.
On Mon, Sep 27, 2004 at 02:42:37PM +0300, Omer Faruk Sen wrote:
Hi,
I need some suggestions (and maybe URL if you send) for Single Board
Computers that runs FreeBSD without any problem.
I am sure there are lots of people here that use FreeBSD on a SBC for
different purposes. Can you
On 28/09/2004, at 1:25 PM, Ted Mittelstaedt wrote:
or use a tool like arpwatch that is specifically designed to let you
know when MAC/IP relationships change on your network.
You don't even need to do that - any router on the network is going to
log
the MAC address because they will see the arp
Heya Folks;
I have multiple machines with Dell Remote Access Card's in them running
FreeBSD 5.2.1-RELEASE-p#.
I cannot for the life of me, find a way to get the keyboard to work once
the machine has booted into FreeBSD.
I know on 4.9-X you can set a kernel option that forces the
On Monday 13 September 2004 05:54 pm, Joshua Tinnin
[EMAIL PROTECTED] wrote:
On Monday 13 September 2004 07:09 am, John DeStefano
[EMAIL PROTECTED] wrote:
You might also try disabling ACPI; I have the same board and this
worked for me. Of course, getting the other onboard stuff to work
33 matches
Mail list logo
