On 9/26/05, caleb <[EMAIL PROTECTED]> wrote:
> Hi,
> I am having some problems with the serial port (si0) connected to my
> modem. Everytime I try to download a file I get the following output on
> my console;
>
> kernel sio0: 1 more silo overflow
>
> I thought it might be the baud rate but stt
Hi,
A month ago I started getting problems with a disk, and bought a new one
to save as much data as posible. Now, I'd like to try to do a thorough
format of the old disk to clear any disk errors and see if this may make
it usable.
Is there a program that can analyse marking bad sectors unus
On Mon, 26 Sep 2005 10:27:36 +0200, Erik Norgaard <[EMAIL PROTECTED]>
Subject: Complete format
Wrote these words of wisdom:
> Hi,
>
> A month ago I started getting problems with a disk, and bought a new one
> to save as much data as posible. Now, I'd like to try to do a thorough
> format of the
On Sun, 25 Sep 2005 17:39:55 -0700, Glenn Dawson <[EMAIL PROTECTED]>
Subject: Re[2]: SSI error message
Wrote these words of wisdom:
> At 04:24 PM 9/25/2005, Gerard Seibert wrote:
> >On Sun, 25 Sep 2005 15:40:21 -0700, Glenn Dawson <[EMAIL PROTECTED]>
> >Subject: Re: SSI error message
> >Wrote thes
Eric Murphy wrote:
[...]
however if i run make buildkernel kernconf=GREED
it runs but uses the GENERIC kernel
This sets the variable ${kernconf}, which is ignored, because make looks
for ${KERNCONF}.
___
freebsd-questions@freebsd.org mailing list
Alle 12:05, domenica 25 settembre 2005, Ned Harrison ha scritto:
> I'm running FreeBSD 5.4 as a desktop operating system on my home
> computer. I would like to set up a webcam for physical security/nature
> observation while I'm away from the residence. Something simple, I just
> want to take per
On Sun, Sep 25, 2005 at 05:05:24AM -0500, Ned Harrison wrote:
> I'm running FreeBSD 5.4 as a desktop operating system on my home
> computer. I would like to set up a webcam for physical security/nature
> observation while I'm away from the residence. Something simple, I just
> want to take period
Hi,
I run ipf and ipnat. Recently I recompiled the kernel and since then ipfw
loads at boot and blocks all my traffic.
How do I disable it permanently or uninstall it?
I have checked and double checked that it is not in my /etc/rc.conf and
kernel config file. So I don't know why it is
I am trying to broadcast live content captured via
a sound card. And I tried to install MuSE, via ports. The system
fetched from ftp the dependencies, built them etc, and when it gets to
MuSE I receive an error. It's posted below, maybe someone is kind
enough to tell me what is wrong…..
make al
Paul wrote:
Hi,
I run ipf and ipnat. Recently I recompiled the kernel and since then ipfw
loads at boot and blocks all my traffic.
How do I disable it permanently or uninstall it?
I have checked and double checked that it is not in my /etc/rc.conf and
kernel config file. So I don't know why
Hi there,
I have been trying to setup FreeBSD 5.4 on a HP ML370 G4. The server has a
Smart Array 641 with raid 5 configuration. The installation goes on well but
the machine hungs on restart after completing the installation. Tried
firmware upgrade but this didn't help.
I have tested the installa
Just add:
options IPFIREWALL_DEFAULT_TO_ACCEPT
in your kernel configuration file. If you are using IPV6, also add:
options IPV6FIREWALL_DEFAULT_TO_ACCEPT
Ivailo Tanusheff
Senior System administrator
ProCredit Bank (Bulgaria) AD
tel. +359 2 921 7161
fax +359 2 921 7110
http://ww
Hello,
after loading 'sound.ko' and 'snd_ich.ko' in my i386 notebook with
5.4-RELEASE, GENERIC kernel and the following modules:
# kldstat
Id Refs AddressSize Name
1 15 0xc040 5dde24 kernel
21 0xc09de000 47e4 if_tap.ko
31 0xc09e3000 d164 kqemu.ko
4 14 0xc09f
Hi,
Thanks for your responses so far.
I have tried explicitly tried to disable it using: ipfw_enable="NO" and
firewall_enable="NO" in /etc/rc.conf
My kernel configuration file doesn't contain any IPFIREWALL options. I did
try adding "options IPFIREWALL_DEFAULT_TO_ACCEPT" and recompili
I'm hoping someone can help me here. I've searched archives, but I haven't
see anyone with this exact problem.
I'm running 5.3 and for a very long time startup and shutdown were normal.
Suddenly, it has changed so that as soon as it loads the kernel, the console
output disappears. I've tried
Hi,
I have a problem blocking foreign intruders for specific ports in ipfw.
One of my friends have 4.X-Stable running in production for proxy,
e-mail, virus etc. Server also have natd and ipfw installed on it. We
have following rule set.
-
00050 2132 1212881 divert 8668 ip from any to any
Hi Paul,
How about posting your rc.conf and kernel config file. You didn't
happen to change the ipfw options in /etc/defaults/rc.conf, and maybe
forgot?
Bob
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Paul
> Sent: Monday, September 26, 2005
Is it possible install both php4 and php5 on the same server using
ports?
I'm using fastcgi so two different interpreters should be fine. (Rename
/usr/local/bin/php to /usr/local/bin/php5-fcgi, for example.)
Can I assume the php4 and php5 modules (for example, pear) won't step on
each other's t
On 9/26/05, Cristian Mijea <[EMAIL PROTECTED]> wrote:
> I am trying to broadcast live content captured via
> a sound card. And I tried to install MuSE, via ports.
Can Muse actually do that sort of thing? I thought it was just a
sequencer? I use darkice + shoutcast server to stream content from my
I haven't done enough installations recently to answer. Are you
saying that if you leave the "fdisk" screen with no primary partition
marked active or with the MSFT one marked active, then it switches
it to the soon-to-be-FreeBSD one?
One of the installer's help files says:
If no slice is m
I have this:
sa0 at ahc0 bus 0 target 3 lun 0
sa0: Removable Sequential Access SCSI-2 device
Connected to this:
ahc0: port 0xd000-0xd0ff mem
0xe9511000-0xe9511fff irq 18 at device 10.0 on pci0 aic7880: Ultra
Wide Channel A, SCSI Id=7, 16/253 SCBs
Running on this:
FreeBSD 5.4-RELEASE
Mike Hernandez wrote:
On 9/26/05, Cristian Mijea <[EMAIL PROTECTED]> wrote:
I am trying to broadcast live content captured via
a sound card. And I tried to install MuSE, via ports.
Can Muse actually do that sort of thing? I thought it was just a
sequencer? I use darkice + shoutcast server t
Tks, Albi for the reply, I will try it as soon as I'll have a little
free time and will tell you how it went.
And Mark, yes I know (first I did compile muse not MuSE and found out
that it's something else :) ). Hopefully I got it right this time and
I will also use the command line to stream to ic
OK so my proliant 3000 server will not boot to the ide HD that I have
successfully loaded FreeBSD 6 beta on 3 times. So what if (and most
improtantly HOW) I create a CD with the / and /etc on it that would get the
kernel, and the config files from /etc, then once the kernel finds the ide
hd, th
Quick question I have basically have an extra server running MS 2000
serving one program and I would like to utilize this sever with more rolls
and eliminate the use of MS products but before I go to a full out BSD
Server I need to know about the RAID compatibility and will it be an issue
recog
Hi Jason,
I have a 2550 with Perc 3/DI card and I boot from CD, it freezes after
detecting 2nd RAID 5 container. I know FreeBSD runs on Poweredge
servers, lots of people do. If I remember correctly, one of the main
developers uses a 2650 or 2850 for dev work. I'm going to try
changing the BIOS o
hi all,
I have a firewall on my FreeBSD machine. Someone must have taken it
down for testing or something because I just checked today, and realized
that it was disabled.
Checking the auth logs, attempts to login from overseas IP's, etc. have
been occuring for at least a week.
Two quick q
Had a look in /etc/defaults/rc.conf and it was defaulted to "NO".
-My kernel config:-
machine i386
cpu I686_CPU
ident ATLANTIS
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints"
I want setup vqadmin-2.3.6. FreeBSD 5.4 and qmail-1.03_4 and
qmailadmin-1.2.7,1 apache+mod_ssl-1.3.33+2.8.22 mysql-server-4.0.24_1 is
running on my system. Install vqadmin from ports and than setting up depens
on http://freebsd.qmailrocks.org/vqadmin.htm but it is not running
installaion by using
Paul wrote:
Had a look in /etc/defaults/rc.conf and it was defaulted to "NO".
Could you please post your /boot/loader.conf ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
Did you install the kernel after building? At least
the one without the IPFIREWALL* option?
(in /usr/src)
make buildkernel KERNCONF=MYKERNEL
make installkernel KERNCONF=MYKERNEL
Also check /boot/loader.conf for ipfw_load="YES"
and make sure /boot/defaults/loader.conf says
ipfw_load="NO".
Got a problem while setting up a new freebsd box. Got similar configuration in
linux box running nearby w/o problems. Here it is (an extract, full
attached):
Section "Module"
Load"dbe"
Load"type1"
Load"speedo"
Load"freetype"
Load "glx"
Ntop, traffic, bwm-ng. U can find more in ports at /net/ location.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Mikhail Teterin
> Sent: Sunday, September 25, 2005 5:54 PM
> To: [EMAIL PROTECTED]
> Subject: can not mount a large FAT32 filesystem
>
>
> Hello!
>
> I have a 4Gb flash-card with FAT32 filesystem.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Michael W. Holdeman
> Sent: Monday, September 26, 2005 7:45 AM
> To: freebsd-questions@freebsd.org
> Subject: boot on CD?
>
>
> OK so my proliant 3000 server will not boot to the ide HD that I have
Matt Juszczak <[EMAIL PROTECTED]> writes:
> 2) Is there a way to set pf to default to deny?
"block all" as your first filtering rule, followed by explicit pass
rules for the stuff you want to pass.
I thought most of the howtoish docs out there recommended that approach,
but here at least is on
i want to setting up my firewall pf with some rules to do 2 conditions:
Deny all except:
2. permit only for 3 users access to pop3 ( ex.: nat only for 3 users
and only for pop3)
3. redirect all port to 8080 for all users. I use proxy for cache and
log traffic.
.
Hello,
I type make bsf SSLTYPE=none and at the end I have error code 1 in
/usr/local/directadmin/customapache/imap-2004c1/c-client
Someone can help me?
thanks
Pierre
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Da
Thanks Tofik and Dave. It was in /boot/loader.conf
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tofik Suleymanov
Sent: 26 September 2005 17:45
To: Paul
Cc: freebsd-questions@freebsd.org
Subject: Re: IPFW won't go away!
Paul wrote:
>Had a look in /e
Greetings,
I was curious to see whether or not GVINUM was stable enough and full
featured enough to reliabily support a RAID5. I installed a 5.4
system and was supprised to find that VINUM was no longer supported
and that GVINUM was missing some of the basic features I was used to
in VINUM. Speci
> maybe you should change rec's value to something bigger..
But it said that the recording source is mic.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL
Hi,
It seems that there is a conflict in manual pages. Or I am missing
something. In manual page of loader.conf it is stated to add
hint.apic.0.disabled="1" to disable acpi totally. But also in device.hints
manual page it is stated to add hint.apic.0.disabled="1" line to disable
acpi. Which o
Omer Faruk Sen wrote:
line to disable acpi. Which one is the true one? To add to device.hints
or loader.conf file.
You could always do it to both and see if anything breaks.
Sorry I don't have a more insightful comment :(
-- Tom
___
freebsd-questio
On Mon, 26 Sep 2005 20:15:12 +0200
Micha__ Mas__owski <[EMAIL PROTECTED]> wrote:
> > maybe you should change rec's value to something bigger..
>
> But it said that the recording source is mic.
hmm. maybe rec is some kind of 'master-control' for all recording
sources.
btw. you forgot to tell us
Adam,
at the command line, type "man send-pr" and follow the
instructions. This list isn't the place for submitting
bugs in FreeBSD.
Ted
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Adam Bayless
>Sent: Monday, September 26, 2005 8:03 AM
>To: Free
Kris Kennaway <[EMAIL PROTECTED]> writes:
> On Sun, Sep 25, 2005 at 03:32:25PM -0400, Robert Mendal wrote:
> > Hello, I'm trying to make a custom kernel for my system for the first time
> > and I'm having some problems. I followed the directions in the FreeBSD
> > Handbook and printed my dmesg.boo
Hi ..
i am using gdesklets but i ahva a little problem with the Calendar
desklet.Clock works perfect
when i trt to launch the calendar gdesklet i got this error
"Could not find sensor 'Calendar'
/usr/X11R6/share/gnome/gdesklets/Displays/Calendar/Calendar.display
A sensor could not be fou
> > I suppose one GigaByte should be enough for the base system of 5.4,
> > isn't it?
>
> Definitely. The full base system (as I mentioned above) takes about
> 170 MB of disk space on i386 installations.
hi!
i would just like to add that it's a good idea to put rapidly changing
filesystems/dire
Omer Faruk Sen <[EMAIL PROTECTED]> writes:
> Hi, It seems that there is a conflict in manual pages. Or I am missing
> something. In manual page of loader.conf it is stated to add
> hint.apic.0.disabled="1" to disable acpi totally. But also in
> device.hints manual page it is stated to add hint.api
This is a follow up to an issue I still have
concerning my FreeBSD 5.4 gateway. I've done a basic
install and have disabled inetd and sendmail. My mail
server is behind my gateway. I can send mail out but
the gateway is blocking incoming request on port 25. I
have the ipf rules and ipnat rules in p
Is there a good and dependable procedure for cleaning up the file
systems from unused junk that just clutters valuable disc space?
I am already aware of the 'periodic daily' scripts
'clear_tmp_enable=YES' option for the rc.conf file, but where else can
one safely remove files.
For example, i
I would like to have a different bootup screen appearing which looks
more professional (sorry), e.g. removing that awful looking beastie
thingie on the side.
What's the best way to do this?
(Sorry to all those beastie lovers out there, but really)
--
Kiffin Gish
Gouda, The Netherlands
__
At 02:26 AM 9/26/2005, Gerard Seibert wrote:
Thanks, that worked. I wanted to change the format to "%b %d, %Y" but it
does not display. I thought about using a non breaking space %#160; but
that does not work either. If I leave any spaces in the format, it will
not display. I will work on that
I have a dual-boot laptop running on the one hand Windows XP (sorry) and
on the other hand good old FreeBSD.
My question: is it possible to exchange data files between both both
operaing systems in an easy and efficient way?
For example, saving all my MP3s on a separate data partition and pla
> Is there a good and dependable procedure for cleaning up the file
> systems from unused junk that just clutters valuable disc space?
>
> I am already aware of the 'periodic daily' scripts
> 'clear_tmp_enable=YES' option for the rc.conf file, but where else can
> one safely remove files.
>
> For e
At 12:52 PM 9/26/2005, Kiffin Gish wrote:
I would like to have a different bootup screen appearing which looks
more professional (sorry), e.g. removing that awful looking beastie
thingie on the side.
What's the best way to do this?
(Sorry to all those beastie lovers out there, but really)
Y
Kiffin Gish wrote:
I would like to have a different bootup screen appearing which looks
more professional (sorry), e.g. removing that awful looking beastie
thingie on the side.
What's the best way to do this?
(Sorry to all those beastie lovers out there, but really)
from the /boot/default/
eoghan wrote:
Hello
Im having a problem getting mysql (version 4.1.14) to work. Im
installing
from ports, which was updated today. Each time i try #>mysql
is get: ERROR 2002 (HY000): Can't connect to local MySQL server
through socket '/tmp/mysql.sock' (2)
mysql.sock isnt in /tmp/ which is a
Can any of your security gurus clue me in on what this blurb
means? I am slowly upgradingmy laptop, "zen", and trying to
ssh back into "tao". I get:
OpenSSL version mismatch. Built against 90704f, you have 90800f
I just upgraded tao; same err. Do I have
Hello Gary,
Monday, September 26, 2005, 10:09:29 PM, you contributed this to our collective
wisdom:
> Can any of your security gurus clue me in on what this blurb
> means? I am slowly upgradingmy laptop, "zen", and trying to
> ssh back into "tao". I get:
> Open
At 01:04 PM 9/26/2005, eoghan wrote:
On 26 Sep 2005, at 20:40, Glenn Dawson wrote:
Make sure you have mysqld_enable"YES" in your /etc/rc.conf and then
use
/usr/local/etc/rc.d/mysql-server.sh start
to start the server. (you may nee to copy mysql-server.sh from
mysql-server.sh.sample first)
Hi G
On 26 Sep 2005, at 21:17, Glenn Dawson wrote:
At 01:04 PM 9/26/2005, eoghan wrote:
On 26 Sep 2005, at 20:40, Glenn Dawson wrote:
Make sure you have mysqld_enable"YES" in your /etc/rc.conf and then
use
/usr/local/etc/rc.d/mysql-server.sh start
to start the server. (you may nee to copy mysql-s
Kiffin Gish wrote:
I have a dual-boot laptop running on the one hand
Windows XP (sorry) and on the other hand good old FreeBSD.
It is kinda sorry, but it seems a little better than Window ME.
:D
My question: is it possible to exchange data files between
both both operaing systems in an e
On 9/26/05, Kiffin Gish <[EMAIL PROTECTED]> wrote:
>
> I have a dual-boot laptop running on the one hand Windows XP (sorry) and
> on the other hand good old FreeBSD.
>
> My question: is it possible to exchange data files between both both
> operaing systems in an easy and efficient way?
I don't k
At 01:28 PM 9/26/2005, eoghan wrote:
On 26 Sep 2005, at 21:17, Glenn Dawson wrote:
At 01:04 PM 9/26/2005, eoghan wrote:
On 26 Sep 2005, at 20:40, Glenn Dawson wrote:
Make sure you have mysqld_enable"YES" in your /etc/rc.conf and then
use
/usr/local/etc/rc.d/mysql-server.sh start
to start th
On Mon, Sep 26, 2005 at 01:09:29PM -0700, Gary Kline wrote:
> Can any of your security gurus clue me in on what this blurb
> means? I am slowly upgradingmy laptop, "zen", and trying to
> ssh back into "tao". I get:
>
> OpenSSL version mismatch. Built against 90704f, you h
On Mon, 26 Sep 2005 21:57:28 +0200
Kiffin Gish <[EMAIL PROTECTED]> wrote:
> I have a dual-boot laptop running on the one hand Windows XP (sorry)
> and on the other hand good old FreeBSD.
>
> My question: is it possible to exchange data files between both both
> operaing systems in an easy and ef
On Mon, 26 Sep 2005 21:50:21 +0200
Kiffin Gish <[EMAIL PROTECTED]> wrote:
> Is there a good and dependable procedure for cleaning up the file
> systems from unused junk that just clutters valuable disc space?
>
> I am already aware of the 'periodic daily' scripts
> 'clear_tmp_enable=YES' option
On 26 Sep 2005, at 21:43, Glenn Dawson wrote:
Thanks. Sorry about the wrong list! Ive copied the contents below.
I see a couple things, scroll down...
#!/bin/sh
#
# $FreeBSD: ports/databases/mysql41-server/files/mysql-server.sh.in,v
1.3 2005/04/11 08:47:36 ale Exp $
#
# PROVIDE: mysql
#
On Monday 26 September 2005 20:50, Kiffin Gish wrote:
> Is there a good and dependable procedure for cleaning up the file
> systems from unused junk that just clutters valuable disc space?
>
> I am already aware of the 'periodic daily' scripts
> 'clear_tmp_enable=YES' option for the rc.conf file, b
Carstea Catalin <[EMAIL PROTECTED]> writes:
> i want to setting up my firewall pf with some rules to do 2 conditions:
> Deny all except:
> 2. permit only for 3 users access to pop3 ( ex.: nat only for 3 users
> and only for pop3)
For this, you might want to look into authpf. it lets you set up pe
I neeed install imap-2004c1 in my freeBSD 5.2.1
When I give the cmd make bsf SSLTYPE=none I get error code 1 in
/var/www/html/imap-2004c1/c-client
Can I have help
Thanks
piereNo virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Rel
On Mon, 26 Sep 2005 12:52:03 -0700, Glenn Dawson <[EMAIL PROTECTED]>
Subject: Re[3]: SSI error message
Wrote these words of wisdom:
> At 02:26 AM 9/26/2005, Gerard Seibert wrote:
>
> >Thanks, that worked. I wanted to change the format to "%b %d, %Y" but it
> >does not display. I thought about usi
On Mon, Sep 26, 2005 at 04:46:01PM -0400, Kris Kennaway wrote:
> On Mon, Sep 26, 2005 at 01:09:29PM -0700, Gary Kline wrote:
> > Can any of your security gurus clue me in on what this blurb
> > means? I am slowly upgradingmy laptop, "zen", and trying to
> > ssh back into "tao". I get:
Other than the fact that scanning, moving, and so on use esi as the source
register and edi as the destination, is there are other reason to use one
over the other for general pointer use?
jm
--
___
freebsd-questions@freebsd.org mailing list
http://lis
I think the Intel chipset incorrectly reports the amount of video ram to the
system
IIRC (It's a while ago now and I no longer use that chipset) you need
agp_load="yes" in /boot/loader.conf or compiled into the kernel and add in a
line:
VideoRam65536
to the device section for the video c
Hello Gary,
Monday, September 26, 2005, 11:27:20 PM, you thoughtfully wrote the following:
> On Mon, Sep 26, 2005 at 04:46:01PM -0400, Kris Kennaway wrote:
>> On Mon, Sep 26, 2005 at 01:09:29PM -0700, Gary Kline wrote:
>> > Can any of your security gurus clue me in on what this blurb
>> >
Hi,
I've installed a fBSD and now I'm tuning it 'cause I need to put it to
serve as mail server.
My questions is if sendmail is able to serve as a serious mail server or I
should try with another software for this job.
In case I choose sendmail or another mail server software, exists an
You are blocking mail from me again:
<[EMAIL PROTECTED]>: host ns1.thought.org[216.231.43.140] said: 550 5.0.0
No SPAM (in reply to MAIL FROM command)
This has been an issue in the past..unless you can get it under
control I'll just stop bothering to read your emails, in case I'm
tempted to t
Steve Monkhouse wrote:
Hi guys..
Ive been pulling my hair out for the last couple of hours over this to no
avail...
FreeBSD 5.2.1-RELEASE-p8
P4 2.8
512mb RAM
I 'had' a working apache13+modssl installation along with mod_perl.
Everything was working perfectly until I decided yesterday to po
jonas wrote:
On Mon, 26 Sep 2005 21:50:21 +0200
Kiffin Gish <[EMAIL PROTECTED]> wrote:
Is there a good and dependable procedure for cleaning up the file
systems from unused junk that just clutters valuable disc space?
I am already aware of the 'periodic daily' scripts
'clear_tmp_enable=YE
Hello!
I tried to set my FreeBSD box to using unicode by setting the
following locale:
[EMAIL PROTECTED] ~ 0 $ locale
LANG=en_GB.UTF-8
LC_CTYPE="en_GB.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_TIME="en_GB.UTF-8"
LC_NUMERIC="en_GB.UTF-8"
LC_MONETARY="en_GB.UTF-8"
LC_MESSAGES="en_GB.UTF-8"
LC_ALL=
Thi
At Mon, 26 Sep 2005 it looks like Kris Kennaway composed:
You are blocking mail from me again:
<[EMAIL PROTECTED]>: host ns1.thought.org[216.231.43.140] said: 550 5.0.0
No SPAM (in reply to MAIL FROM command)
This has been an issue in the past..unless you can get it under
control I'll just
On Mon, Sep 26, 2005 at 03:50:30PM -0700, Bill Schoolcraft wrote:
> At Mon, 26 Sep 2005 it looks like Kris Kennaway composed:
>
> >You are blocking mail from me again:
> >
> ><[EMAIL PROTECTED]>: host ns1.thought.org[216.231.43.140] said: 550
> >5.0.0
> > No SPAM (in reply to MAIL FROM command)
On Mon, 2005-09-26 at 19:01, Efren Bravo wrote:
> Hi,
>
> I've installed a fBSD and now I'm tuning it 'cause I need to put it to
> serve as mail server.
>
> My questions is if sendmail is able to serve as a serious mail server or I
> should try with another software for this job.
>
> In
>
> Kiffin Gish wrote:
>
> > I would like to have a different bootup screen appearing which looks
> > more professional (sorry), e.g. removing that awful looking beastie
> > thingie on the side.
Here is how to change it: http://www.baldwin.cx/splash/ . Also has links
to already-correct-size imag
Hi list,
can I make a copy using dd command from a HD scsi
Maxtor 36 GB to a HD IDE Sansung 40 GB ?
How can I do it ?? Is there an example ??
Thanks,
Aguiar
___
Novo Yahoo! Messenger com voz: ligações, Ya
>
>
> It just the way it got pasted. I grabbed it from samba (yep, got that
> working :) )... theres no actual spaces in the file. Im not sure what
> David means? If i run pkg_info | grep mysql i see version 4.1.14 for
I had exactly the same problem you are having until i enabled it in
rc.conf w
Hello,
I am running fluxbox and I don't like the method of using the scrollbar
and/or hotkeys to switch desktops (even though it is easy). On my
windows box at work I have an app called 'goscreen' installed. It
allows me to see a preview of what is on each desktop and click on
whichever one
My PS/2 mouse doesn't move in Xorg. I've tried the protocol on auto and ps/2 in
xorgconfig, but nothing seems to work. I've noticed there isn't an entry in
/dev for psm0. I'm using a keyboard, video, mouse switcher, but that shouldn't
matter because it worked on linux before. I tried adding the
On Mon, 26 Sep 2005, Aguiar Magalhaes wrote:
Hi list,
can I make a copy using dd command from a HD scsi
Maxtor 36 GB to a HD IDE Sansung 40 GB ?
How can I do it ?? Is there an example ??
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/disks.html#NEW-HUGE-DISK
__
Hello,
I can't get my LG XTICK 1GB USB memory stick
working with 5-Stable (as of Sept. 25, 2005).
Also, when I plug it in, my mouse pointer in
X disappears; I get it back by restarting the
moused daemon.
Various outputs are listed below.
Any idea what's the problem here?
Is there a way to get
brian kaczynski wrote:
My PS/2 mouse doesn't move in Xorg. I've tried the protocol on auto
and ps/2 in xorgconfig, but nothing seems to work. I've noticed there
isn't an entry in /dev for psm0. I'm using a keyboard, video, mouse
switcher, but that shouldn't matter because it worked on linux
bef
On Mon, Sep 26, 2005 at 09:34:35PM -0400, brian kaczynski wrote:
> My PS/2 mouse doesn't move in Xorg. I've tried the protocol on auto and ps/2
> in xorgconfig, but nothing seems to work. I've noticed there isn't an entry
> in /dev for psm0. I'm using a keyboard, video, mouse switcher, but that
Hi there I've had the following problem compiling the
native jdk15.
this is the FreeBSD version:
FreeBSD verde.fish 5.4-STABLE FreeBSD 5.4-STABLE #0:
Fri Aug 12 20:17:01 COT 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/VERDE i386
This are the files in my dist dir
./
Here you are, I'm sure this sort of thing is what you are really
dying to have on there;
# diff beastie.4th beastie.4th.cross
75,93c75,93
< 2dup at-xy ." ,," 1+
< 2dup at-xy ." /()`" 1+
< 2dup at-xy ." \ \___ / |" 1+
<
Hello all
I don't know if it's appropriate to ask this question here, but now i'll
give it a try.
I've set up postfix on a new box with maildir support, and i've been
using procmail to deliver all my mail, so i now have the rules i've always
missed.
Then i've taken a tarball from the vhosting en
hi all,
I was wondering if someone can help me with this
install problem.
as well as the log it complains about
favicons.cpp:29:77: kdatastream.h: No such file or
directory
kiontheme.h
kimageio.h
ksimpleconfig.h
kstandardsdirs.h
kio/job.h
with the same error message
if anyone can shed somelight
Sorry for that. I have missed it. Should be more careful before emailing to
a mailing list ;)
I also mixed loader.conf manual page with acpi manual page.
Lowell Gilbert writes:
Omer Faruk Sen <[EMAIL PROTECTED]> writes:
Hi, It seems that there is a conflict in manual pages. Or I am mis
What is the simple way to know my memory stick name?
With dmesg i know if my memory stick is mount but i want to know the
complete name.
Ex.: da0s1
...
--
Any help would be greatly appreciated.
regards,
Carstea Catalin
___
freebsd-questions@freebsd.o
1 - 100 of 104 matches
Mail list logo