Got it, thanks!
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote: On 21/04/07, L Goodwin wrote:
I want to dedicate the entire disk to a single FreeBSD partition (da1s1a),
and
am a little confused about editing partitions via bsdlabel -e .
Prior to editing, it looks like this:
I'd also add to your remarks, Martin, that the list has people who serve
as few as one person to one fellow who is mostly quiet these days who
quite literally worked on a setup handling over a million addresses.
Martin is one of the stalwarts on the group. (I've mostly been quiet for
the last
Running FreeBSD 6.2-STABLE .. Azureus as always fials with the following (any
ideas/suggestions welcomed)
---
=== Building for azureus-3.0.1.0
Buildfile: build.xml
init:
[mkdir] Created dir: /usr/ports/net-p2p/azureus/work/build
compile:
[javac] Compiling 2510 source files
I have a Marvell Yukon 88E8050 Gigabit Ethernet which came with my
motherboard. When looking for it's driver I found that RELENG_6
supports it, and the driver is located at sys/dev/msk/ But I am using
RELENG_6_2.
Is it advisable to take this driver from RELENG_6 to RELENG_6_2? Is
there some
Dear list
This is OT. I am a 4 year php developer and is very familiar with
javascript and awk (familiar = knows and used all functions and features
of the language itself) and I am a 5 year FreeBSD user. Being frustrated
for the lack of a good console-based issue tracking tool (like mantis
On Sun, Apr 22, 2007 at 05:50:28PM +0300, Ghirai wrote:
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits,
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding arrows, etc
on images, then saving in a couple popular
On Sunday 22 April 2007 06:32, Zhang Weiwu wrote:
Dear list
This is OT. I am a 4 year php developer and is very familiar with
javascript and awk (familiar = knows and used all functions and features
of the language itself) and I am a 5 year FreeBSD user. Being frustrated
for the lack of a
Hi,
I am trying to set up m y computer to use X in 6.2
I edited the xorg.conf file with my monitors Horiz and Vert freq, but
whenever I try and do startX
I get this message
Out of Range Hfreq 81 khz
VFreq 65 hz
Thanks
Rick
Rick Knebel
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
I have purchased a new Proliant G5 server with the E200i RAID controller.
FreeBSD is not recognizing the the drives. The ciss module for the
controller is not loaded. Do I need to do something special to make
FreeBSD recognize the controller?
Which version of
At 11:19 AM 4/22/2007, Richard Knebel wrote:
Hi,
I am trying to set up m y computer to use X in 6.2
I edited the xorg.conf file with my monitors Horiz and Vert freq, but
whenever I try and do startX
I get this message
Out of Range Hfreq 81 khz
VFreq 65 hz
Thanks
Rick
Hello list,
Has anyone tried to use ldasm and/or lida on FreeBSD?
Are there any alternatives, besides hte?
Thanks.
--
Best regards,
Ghirai.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Sat, Apr 21, 2007 at 09:58:11PM -0500, [EMAIL PROTECTED] wrote:
On 21/04/07, L Goodwin [EMAIL PROTECTED] wrote:
I want to dedicate the entire disk to a single FreeBSD partition
(da1s1a), and
am a little confused about editing partitions via bsdlabel -e
slicename.
Prior to editing,
On Sun, 22 Apr 2007 18:48:04 +1000
Warren Liddell [EMAIL PROTECTED] wrote:
Running FreeBSD 6.2-STABLE .. Azureus as always fials with the
following (any ideas/suggestions welcomed)
I had this problem. It went away when I updated my java version to 1.5
Ghirai wrote:
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding arrows, etc
on images, then saving in a
On Sun, Apr 22, 2007, Frank Staals wrote:
Ghirai wrote:
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding
here is the xorg.conf file. It almost seems that the message is
coming from my monitor.
Section ServerLayout
Identifier X.org Configured
Screen 0 Screen0 0 0
InputDeviceMouse0 CorePointer
InputDeviceKeyboard0 CoreKeyboard
EndSection
Section
On Apr 22, 2007, at 10:50 AM, Ghirai wrote:
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding arrows, etc
on
At 01:38 PM 4/22/2007, Richard Knebel wrote:
here is the xorg.conf file. It almost seems that the message is coming
from my monitor.
Section ServerLayout
Identifier X.org Configured
Screen 0 Screen0 0 0
InputDeviceMouse0 CorePointer
InputDevice
On 4/22/07, Ghirai [EMAIL PROTECTED] wrote:
Hello,
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding arrows, etc
on
Hello list,
Has anyone tried to use ldasm and/or lida on FreeBSD?
Are there any alternatives, besides hte?
Thanks.
It seems that objdump is linked statically with bfdlib,
and it doesn't support pe files.
My question would be how to get objdump to
diassemble pe files?
I've searched around
Ghirai [EMAIL PROTECTED] writes:
Even though this is not necessarily a pure FreeBSD question,
i'd like to know if there are any mspaint-like applications
in the ports collection?
I don't need anything as complex as gimp,
i just want to make quick edits, adding arrows, etc
on images, then
Le Jeu 19 avr 07 à 1:00:38 +0200, Vittorio De Martino [EMAIL PROTECTED]
écrivait :
I have just upgraded FreeMAT to 3.1, which fixes the inv() problem, and
which should fix this Help on line bug too; could you please check it?
Yes, with the new version 3.1 inv now works fine.
I have a machine with a large hard drive which is not completely
partioned (in the MSDOS sense). I would like to take some of this
unallocated space and make it a slice, label it and newfs it, but I am
not sure if I can do this without screwing up the existing slice scheme.
Are there any
After a recent disk failure, I left myself a note to add the DNS/DHCP
info to my backup.
I have a small, over-engineered for my education, network of 10
computers in my house. I run BIND with dynamic zones on my FreeBSD
server, I also use the DNS service on my Win2k-AD server. They both are
I'm trying to get my feet wet with an ethernet bridging setup
under OpenVPN.
I have two hosts on a 10.0.0.0/24 network that I want to
connect: dl360 is the server, and t30 is the client. These
hosts are resolvable by /etc/hosts. TLS seems to be working
from certs I created at cacert.org.
The
Hi,
I have a machine with a large hard drive which is not completely
partioned (in the MSDOS sense). I would like to take some of this
unallocated space and make it a slice, label it and newfs it, but I am
not sure if I can do this without screwing up the existing slice scheme.
Are there
After a recent disk failure, I left myself a note to add the
DNS/DHCP info to my backup.
I have a small, over-engineered for my education, network of
10 computers in my house. I run BIND with dynamic zones on
my FreeBSD server, I also use the DNS service on my Win2k-AD
server.
Hi,
I have been askedto install FreeBSD on a server, but I had no saying
on the procurement of the server.
It ends up to be an HP 380G5, with onboard Broadcom based NIC that is
not supported and only PCIe extension slots.
I am wondering what NIC I could buy that would be PCIe, x4 or x8, and
29 matches
Mail list logo