Re: Nvidia graphics on AMD64

2008-02-03 Thread Tore Lund
Kimi wrote: xorg-driver-nv will be more then good enough, providing 3D is not needed. 2D can also be pretty sluggish at times. The following shows the nv driver in its fully glory as I was leafing through a page of photos: http://home.no/tl18/misc/mincemeat.jpg Moreover, the nv driver does

Re: Nvidia graphics on AMD64

2008-02-03 Thread Wojciech Puchar
http://home.no/tl18/misc/mincemeat.jpg Moreover, the nv driver does not provide a way to properly control brightness and contrast. I would say it is strictly necessary for anyone who is into photography to use the nvidia-driver, even if they are not remotely interested in 3D. -- for desktop i

RE: SATA question

2008-02-03 Thread Ted Mittelstaedt
Looks like it isn't detecting it as a generic controller. But I think this is the problem. Note that the system is applying ata2 and ata3 to atapci0, and ata0 and ata1 to atapci1. This is backwards, I've not seen this before in the ata driver. Normally, ata0 and ata1 are applied to the first

Re: buildworld failed

2008-02-03 Thread Venkatesh K
I did try that too! Still same problem. Thanks, Venkatesh K On Feb 3, 2008 9:50 AM, Supote Leelasuppakorn [EMAIL PROTECTED] wrote: Hi, I have ever faced this problem. I suggested you deleting the whole /usr/obj then make buildworld again. Date: Sun, 3 Feb 2008 08:44:59 +0530

Re: /dev/dsp0.0 disappears after power outage

2008-02-03 Thread swell . k
Aryeh M. Friedman [EMAIL PROTECTED] writes: I just had a power outage and when it came back /dev/dsp0.0 was missing from the devices. the kern module loaded fine and detected the card correctly (according to dmesg, sysctl and /dev/sndstat) but neither the above or /dev/pcm exists. Any

Re: Looking for a Text on ZFS

2008-02-03 Thread Christian Baer
On Sat, 2 Feb 2008 21:11:21 +0100 Mel wrote: If you review the Not done items @ http://wiki.freebsd.org/ZFS and still are doubting, then http://www.opensolaris.org/os/community/zfs/whatis/ describes what the features *can* be. I got a good impression from that text what the advantages

Re: Behind a router

2008-02-03 Thread Christian Baer
On Sun, 3 Feb 2008 02:24:43 -0500 Jeremy Gransden wrote: please fix the line wrap in your email. It is unreadable And you really neaded to quote over 600 lines just to write that? Regards, Chris ___ freebsd-questions@freebsd.org mailing list

Re: Behind a router

2008-02-03 Thread Christian Baer
On Sat, 2 Feb 2008 21:49:55 -0800 (PST) Eugen Udma wrote: I took the liberty of cleaning up you post. Please fix your line wrap! One word per line is not what I call easy reading. I had a working minimal FreeBSD system until I put it behind a wireless router. Since then, my network is not

Re: SATA question

2008-02-03 Thread Erik Trulsson
On Sun, Feb 03, 2008 at 01:25:07AM -0800, Ted Mittelstaedt wrote: Looks like it isn't detecting it as a generic controller. But I think this is the problem. Note that the system is applying ata2 and ata3 to atapci0, and ata0 and ata1 to atapci1. This is backwards, I've not seen this

Re: Looking for a Text on ZFS

2008-02-03 Thread Christian Baer
On Sat, 2 Feb 2008 21:38:49 -0600 [EMAIL PROTECTED] wrote: ZFS ends the microsotf monopoly over our disks. And this monopoly is founded on ... what? ZFS begins the world as a 128bit dadaspace. Using ZFS fixes allocations and massaging your NAS. The inode is now the wenode. Usaging ZFS will

Re: buildworld failed

2008-02-03 Thread Christian Baer
On Sun, 3 Feb 2008 15:00:36 +0530 Venkatesh K wrote: I did try that too! Still same problem. 1. Please do not quote everything and then put your comment on top. 2. Try a new csup. Sometime the source tree even in -STABLE is a little unstable. :-) 3. Try removing the -march argument.

Strange HDD order

2008-02-03 Thread Christian Baer
Greetings programs! I have a computer here with 10 HDDs. Four of them are connected to the southbridge of the mainboard. The other 6 are connected to two Promise SATAII 300 TX4. Four of the drives are connected to the first controller (making it 'full') the other two connected to the second. To

RE: buildworld failed

2008-02-03 Thread Supote Leelasuppakorn
Hi, I'm not sure you tried below or not. 1. delete both /usr/src and /usr/obj 2. verify your supfile for corret version of SRC you want 3. cvsup STABLE brach again 4. verify cvsup operation and also all src tree in /usr/src 5. then try make buld world again PS. you'd better attached your

Re: buildworld failed

2008-02-03 Thread Gerard
On Sun, 3 Feb 2008 15:00:36 +0530 Venkatesh K [EMAIL PROTECTED] wrote: I did try that too! Still same problem. From the FreeBSD manual: 23.4.14.6. What do I do if something goes wrong? Make absolutely sure your environment has no extraneous cruft from earlier builds. This is simple enough. #

Re: Strange HDD order

2008-02-03 Thread Erik Trulsson
On Sun, Feb 03, 2008 at 01:13:34PM +0100, Christian Baer wrote: Greetings programs! I have a computer here with 10 HDDs. Four of them are connected to the southbridge of the mainboard. The other 6 are connected to two Promise SATAII 300 TX4. Four of the drives are connected to the first

Re: buildworld failed

2008-02-03 Thread Venkatesh K
On Feb 3, 2008 5:36 PM, Gerard [EMAIL PROTECTED] wrote: On Sun, 3 Feb 2008 15:00:36 +0530 Venkatesh K [EMAIL PROTECTED] wrote: I did try that too! Still same problem. From the FreeBSD manual: 23.4.14.6. What do I do if something goes wrong? Make absolutely sure your environment has no

Re: Strange HDD order

2008-02-03 Thread Christian Baer
On Sun, 3 Feb 2008 14:03:33 +0100 Erik Trulsson wrote: D 0 WDC WD3200SD-01KNB0 08.05J08 (ad4) D 1 WDC WD3200SD-01KNB0 08.05J08 (ad6) D 2 SAMSUNG HD501LJ CR100-11 (ad8) D 3 SAMSUNG HD501LJ CR100-11 (ad10) D 4 Seagate ST3500320AS SD04 (ad12) D 5 Seagate ST3500320AS SD04 (ad14)

Re: buildworld failed

2008-02-03 Thread Venkatesh K
On Feb 3, 2008 6:34 PM, Venkatesh K [EMAIL PROTECTED] wrote: On Feb 3, 2008 5:36 PM, Gerard [EMAIL PROTECTED] wrote: On Sun, 3 Feb 2008 15:00:36 +0530 Venkatesh K [EMAIL PROTECTED] wrote: I did try that too! Still same problem. From the FreeBSD manual: 23.4.14.6. What do I do if

7.0RC1 - more panics, hardware?

2008-02-03 Thread Drew Sanford
Ok guys, frustrating one here. I installed 7.0RC1 on the system that I've been trying to make into my new server (it's a home thing, natd, email, apache, mysql, firewall, you know, fun stuff) and it has now failed catastrophically twice. The first time I was convinced it was the hard drive.

Re: Intel® G31 + ICH7

2008-02-03 Thread Gordon McKee
Hi Here you go!! pciconf -lv |grep -A4 '^none' [EMAIL PROTECTED]:2:0: class=0x03 card=0x0df7105b chip=0x29c28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '(Bearlake) Integrated Graphics Controller' class = display subclass = VGA -- [EMAIL

Behind a router revisited

2008-02-03 Thread Eugen
I edited my original post for the wrapping problem and, as a result of Christian Baer response, I tried the default settings, so now I have the original (empty) /etc/dhclient.conf. Same result. I had a working minimal FreeBSD system until I put it behind a wireless router. Since then my network

Re: Strange HDD order

2008-02-03 Thread Erik Trulsson
On Sun, Feb 03, 2008 at 02:34:48PM +0100, Christian Baer wrote: On Sun, 3 Feb 2008 14:03:33 +0100 Erik Trulsson wrote: D 0 WDC WD3200SD-01KNB0 08.05J08 (ad4) D 1 WDC WD3200SD-01KNB0 08.05J08 (ad6) D 2 SAMSUNG HD501LJ CR100-11 (ad8) D 3 SAMSUNG HD501LJ CR100-11 (ad10) D 4

Re: OT: Silly Bind question

2008-02-03 Thread DAve
Mark D. Foster wrote: DAve wrote: I am stumped, what have I done wrong? Thanks, DAve Looks to me like you need to remove the pixelhammer.com zone from your old bind servers, as the delegation from the root points to ns1auth.tls.net and ns2auth.tls.net both of which appear to have

Re: OT: Silly Bind question

2008-02-03 Thread DAve
Andy Dills wrote: On Sun, 3 Feb 2008, DAve wrote: I am stumped, what have I done wrong? You'll kick yourself. Here's the hint: /users/andydig @ns1.totallogic.com ftp.pixelhammer.com txt ; DiG 9.3.4 @ns1.totallogic.com ftp.pixelhammer.com txt ; (1 server found) ;; global options:

Re: Strange HDD order

2008-02-03 Thread Matt
On Feb 3, 2008 6:13 AM, Christian Baer [EMAIL PROTECTED] wrote: Greetings programs! I have a computer here with 10 HDDs. Four of them are connected to the southbridge of the mainboard. The other 6 are connected to two Promise SATAII 300 TX4. Four of the drives are connected to the first

Re: OT: Silly Bind question

2008-02-03 Thread Mark D. Foster
DAve wrote: Andy Dills wrote: On Sun, 3 Feb 2008, DAve wrote: I am stumped, what have I done wrong? You'll kick yourself. Here's the hint: /users/andydig @ns1.totallogic.com ftp.pixelhammer.com txt ; DiG 9.3.4 @ns1.totallogic.com ftp.pixelhammer.com txt ; (1 server

Re: Looking for a Text on ZFS

2008-02-03 Thread Wojciech Puchar
I already read that before I posted my question. Neither by this text, nor by the one in the Wikipedia could I participate in the exitement around ZFS. Ok, so it's a 128Bit FS. Big fat, hairy deal! I couldn't see that's like 64-bit soundcards that have to be better than 32-bit, while most of

Re: OT: Silly Bind question

2008-02-03 Thread DAve
Mark D. Foster wrote: DAve wrote: Andy Dills wrote: On Sun, 3 Feb 2008, DAve wrote: I am stumped, what have I done wrong? You'll kick yourself. Here's the hint: /users/andydig @ns1.totallogic.com ftp.pixelhammer.com txt ; DiG 9.3.4 @ns1.totallogic.com

ext2fs: strange behaviour after alternativ boot into other OS

2008-02-03 Thread Axel Burwitz
Hi, is maybe somenone also noticing the following behaviour in FreeBSD 7.0 RC1 on his system: - have besides the FreeBSD slice additional some data partitions with ext2 on two discs in my system. As long as I only boot with FreeBSD, everything fine. - but when I occasionally boot with XP

6.3-RELEASE, i915G, drm, dri

2008-02-03 Thread p9_gkvye
I have an Intel i915G onboard graphics device that uses 8MB of shared memory. After installing 6.3-RELEASE I compiled a kernel with the drm and i915drm devices enabled (and leaving the agp device enabled). On boot, agp0 detects 8MB of memory for the i915G, and /dev/agpgart is created. But drm0

linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Stacey Roberts
Hello, I've just completed installing FreeBSD 7.0-PRERELEASE (Sat 2nd Feb 2008) and having finished installing (latest frokm ports) X, Gnome and linux-opera, I find that clicking on the linux-opera menu item fails to start Opera. Nothing gets logged to messages / security, and I can't think

Re: mpd with a dual pppoe setup

2008-02-03 Thread Alexander Motin
Reinhold wrote: If you are connecting to the ISP it would be better not to specify IP to let them be negotiated. How will I go ahead and set the static ips for both my wan connections? If IPs are static then provider itself will negotiate them every time same. If you will specify them and

where to find old ports.tar.gz files

2008-02-03 Thread Jin Guojun [VFFS]
I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile to build these wine releases on FreeBSD 6.3-R, but I cannot find older ports.tar.gz files. Does anyone know where I can find older ports.tar.gz files that contain wine 0.9.37 to 0.9.39

Re: mpd with a dual pppoe setup

2008-02-03 Thread Reinhold
Thanks for the reply. Here is what I've done so far. /usr/local/etc/mpd5/mpd.conf The config you have made probably suits to mpd3/4, but not to mpd5. Mpd5 uses alike commands, but general configuration idea is different. There is no mpd.links file in mpd5. Read new examples present in

Re: ext2fs: strange behaviour after alternativ boot into other OS

2008-02-03 Thread Wojciech Puchar
is maybe somenone also noticing the following behaviour in FreeBSD 7.0 RC1 on his system: - have besides the FreeBSD slice additional some data partitions with ext2 on two discs in my system. As long as I only boot with FreeBSD, everything fine. - but when I occasionally boot with XP (from

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Wojciech Puchar
I find that clicking on the linux-opera menu item fails to start Opera. Nothing gets logged to messages / security, and I can't think of where else to look for any hints as to what's going on. start linux opera from xterm and read what's up. do you have linprocfs

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Stacey Roberts
Hi Wojciech! Thanks for getting back to me. On Sun, 03 Feb 2008, Wojciech Puchar wrote: I find that clicking on the linux-opera menu item fails to start Opera. Nothing gets logged to messages / security, and I can't think of where else to look for any hints as to what's going on.

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Wojciech Puchar
$ linux-opera [1] 2263 [EMAIL PROTECTED] ~]$ shm_allow_removed is disable, set OPERA_NUM_XSHM to 0 to disable shared memory. ELF binary type 0 not known. ELF binary type 0 not known. ELF binary type 0 not known. ^^^ this is strange - like no linux emulation active at all. no more

Re: where to find old ports.tar.gz files

2008-02-03 Thread Jin Guojun [VFFS]
[EMAIL PROTECTED] wrote: I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/wine/ The page can select only tags with released FreeBSD version. Is there any way to select an

Re: where to find old ports.tar.gz files

2008-02-03 Thread Lena
I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/wine/ The page can select only tags with released FreeBSD version. Is there any way to select an intermediate version (tag)? Don't

Re: where to find old ports.tar.gz files

2008-02-03 Thread Jin Guojun [VFFS]
Erik Trulsson wrote: On Sun, Feb 03, 2008 at 10:46:20AM -0800, Jin Guojun [VFFS] wrote: I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile to build these wine releases on FreeBSD 6.3-R, but I cannot find older ports.tar.gz files. Does

Re: where to find old ports.tar.gz files

2008-02-03 Thread Jin Guojun [VFFS]
[EMAIL PROTECTED] wrote: I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/wine/ The page can select only tags with released FreeBSD version. Is there any way to select an

Re: where to find old ports.tar.gz files

2008-02-03 Thread Erik Trulsson
On Sun, Feb 03, 2008 at 10:46:20AM -0800, Jin Guojun [VFFS] wrote: I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile to build these wine releases on FreeBSD 6.3-R, but I cannot find older ports.tar.gz files. Does anyone know where I can

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Wojciech Puchar
$ cat /etc/fstab # DeviceMountpoint FStype Options DumpPass# /dev/ad4s2b noneswapsw 0 0 /dev/ad4s2a / ufs rw 1 1 /dev/ad4s2e /home ufs rw

wireless losing connection periodically

2008-02-03 Thread Reinis Ivanovs
hello, I've noticed that my wireless connection tends to drop once in a while and only restores itself after a relatively longish period. I'm dealing with it now by connecting a laptop by wire (the box doesn't have a screen or a keyboard) and running /etc/rc.d/netif restart ral0, but that's a

Re: mpd with a dual pppoe setup

2008-02-03 Thread Reinhold
If IPs are static then provider itself will negotiate them every time same. If you will specify them and provider will request another, negotiation will fail. So I would not recommend you to specify them. For wan1 I have one ip and for wan2 I have 5 ips Probably for wan2 you have one

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Stacey Roberts
Hi Wojciech! Thanks for the response. On Sun, 03 Feb 2008, Wojciech Puchar wrote: $ cat /etc/fstab # DeviceMountpoint FStype Options Dump Pass# /dev/ad4s2b noneswapsw 0 0 /dev/ad4s2a /

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Wojciech Puchar
so please ask some else :) i have no other ideas. and please check your mailserver (respond on priv please) Feb 3 21:42:04 wojtek sm-mta[7276]: m13Kf36P007273: to=[EMAIL PROTECTED], ctladdr=[EMAIL PROTECTED] (1003/1003), delay=00:01:01, xdelay=00:01:01, mailer=esmtp, pri=31239,

Ports binary packages

2008-02-03 Thread Oren Almog
Hi When are new binary packages available? Are they compiled only at RELEASEs? Thanks. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Boris Samorodov
On Sun, 3 Feb 2008 20:33:10 + Stacey Roberts wrote: On Sun, 03 Feb 2008, Wojciech Puchar wrote: and turn ON linux emulation because this is probably your problem :) Err., if you meant to ensure that linux_enable=YES is in /etc/rc.conf, and that linux-base is installed, then these

Re: where to find old ports.tar.gz files

2008-02-03 Thread Lena
I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile http://www.freebsd.org/cgi/cvsweb.cgi/ports/emulators/wine/ ___ freebsd-questions@freebsd.org mailing list

automatic fsck on gmirror failure

2008-02-03 Thread Gunther Mayer
Hi there, I have a RAID 1 mirror implemented with gmirror and we recently had some power issues at our data centre which caused fsck to fail mysteriously. The server lost power unexpectedly, then came back up again for a minute, power died again and shortly after the next boot the following

Re: Ports binary packages

2008-02-03 Thread Kris Kennaway
Oren Almog wrote: Hi When are new binary packages available? Are they compiled only at RELEASEs? No, they are compiled and updated continuously. Kris ___ freebsd-questions@freebsd.org mailing list

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Boris Samorodov
On Sun, 3 Feb 2008 21:07:06 + Stacey Roberts wrote: % kldstat | grep linux $ kldstat | grep linux $ Nothing was returned.., OK. Can you try kldload linux as root, repeat that kldstat... and if it shows linux.ko then try to run linux-opera? WBR -- bsam

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Stacey Roberts
Hi Boris! Good to hear from you.., On Sun, 03 Feb 2008, Boris Samorodov wrote: On Sun, 3 Feb 2008 20:33:10 + Stacey Roberts wrote: On Sun, 03 Feb 2008, Wojciech Puchar wrote: and turn ON linux emulation because this is probably your problem :) Err., if you meant to

Re: where to find old ports.tar.gz files

2008-02-03 Thread Dmitry Marakasov
* Jin Guojun [VFFS] ([EMAIL PROTECTED]) wrote: I need to get wine 0.9.37 to 0.9.39 ports build structure, mainly the ports/emulatoes/wine/Makefile to build these wine releases on FreeBSD 6.3-R, but I cannot find older ports.tar.gz files. Does anyone know where I can find older ports.tar.gz

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Stacey Roberts
Hi Boris, Good to hear from you.., On Mon, 04 Feb 2008, Boris Samorodov wrote: On Sun, 3 Feb 2008 21:07:06 + Stacey Roberts wrote: % kldstat | grep linux $ kldstat | grep linux $ Nothing was returned.., OK. Can you try kldload linux as root, repeat that kldstat... and if

Re: buildworld failed

2008-02-03 Thread Kent Stewart
On Sunday 03 February 2008, Venkatesh K wrote: On Feb 3, 2008 6:34 PM, Venkatesh K [EMAIL PROTECTED] wrote: On Feb 3, 2008 5:36 PM, Gerard [EMAIL PROTECTED] wrote: On Sun, 3 Feb 2008 15:00:36 +0530 Venkatesh K [EMAIL PROTECTED] wrote: I did try that too! Still same problem.

Re: linux-opera-9.25.20071214 on FreeBSD 7.0-PRERELEASE amd64 fails to start up

2008-02-03 Thread Boris Samorodov
On Sun, 3 Feb 2008 21:39:57 + Stacey Roberts wrote: On Mon, 04 Feb 2008, Boris Samorodov wrote: On Sun, 3 Feb 2008 21:07:06 + Stacey Roberts wrote: % kldstat | grep linux $ kldstat | grep linux $ Nothing was returned.., OK. Can you try kldload linux as root,

Re: automatic fsck on gmirror failure

2008-02-03 Thread Wojciech Puchar
it failed while rebuilding with badly written data on the disk that was used, while other rebuild. now it can't read it. if you are sure that it doesn't pass through fsck before second reboot, do the following. 1) turn off gmirror 2) clear gmirror header on both providers 3) run fsck the

xterm question

2008-02-03 Thread Chris Whitehouse
it's a stupid little question really but I have an xterm filled with a log file (telnetted into another machine) which is scrolled off the screen. How do I select all the text in one go? I only seem to be able to select the visible screenful, copy, paste into text file, scroll up, select the

xterm question

2008-02-03 Thread Robert Huff
Chris Whitehouse writes: it's a stupid little question really but I have an xterm filled with a log file (telnetted into another machine) which is scrolled off the screen. If you can telnet, can you ftp? Robert Huff

Re: speeding up buildworld/kernel

2008-02-03 Thread Brian
I have started using ccache as a result of this thread, the speed benefit for old hw is nice. p3-850 Cele This would be 3-4 hours for a buildworld and a make kernel, now it is 3234.877u 2318.444s 1:44:56.27 88.1%2580+1569k 79615+15476io 10553pf+0w K6-2 450 This would be 8-9 hours for a

Re: Question about restore

2008-02-03 Thread Jerry McAllister
On Sat, Feb 02, 2008 at 08:28:37PM +0700, Fira wrote: Hi list, I want to migrate one of my server (machine A) into another (machine B). My choice is using 'dump' and 'restore'. I've dumped all of my filesystem into third machine (machine C) over ssh. All went fine. Then, I want to restore

Re: xterm question

2008-02-03 Thread swell . k
Chris Whitehouse [EMAIL PROTECTED] writes: it's a stupid little question really but I have an xterm filled with a log file (telnetted into another machine) which is scrolled off the screen. How do I select all the text in one go? I only seem to be able to select the visible screenful, copy,

Re: Looking for a Text on ZFS

2008-02-03 Thread [EMAIL PROTECTED]
On 03/02/2008, Christian Baer [EMAIL PROTECTED] wrote: On Sat, 2 Feb 2008 21:38:49 -0600 [EMAIL PROTECTED] wrote: Well, the best, I think. I take ist, you don't approve of ZFS? :-) It is not a panacaea. The optimisation and sharing of r/w, Load balancing, And redundant data verification

usb wifi

2008-02-03 Thread Brian
Has anyone tried the usb based wifi adapters, something like this http://catalog.belkin.com/IWCatProductPage.process?Product_Id=179211 with freebsd? Brian ___ freebsd-questions@freebsd.org mailing list

Re: xterm question

2008-02-03 Thread Ashish Shukla आशीष शुक्ल
swell k writes: swell Chris Whitehouse [EMAIL PROTECTED] writes: it's a stupid little question really but I have an xterm filled with a log file (telnetted into another machine) which is scrolled off the screen. How do I select all the text in one go? I only seem to be able