If I were you I'd just try to install Visio under Wine and see how
it goes. That is, mount the install cd, check with winecfg that
Wine can see the mount point as a drive D: or something and then
run wine d:\\setup.exe ...
It did not work at all. This version of Visio is old enough that
it
Hello,
I would like to implement traffic shaping using pf. I know I need to
recompile kernel to be able to achieve this but I have a more general
question. I used to have pf with traffic shaping on a Pentium III 866
before and as soon as I activated it, the http response of the box was
noticably
Hi all,
I am trying to connect my sony to freebsd via usb cable and see three new
devices:
/dev/da0
/dev/da1
/dev/da2
First one for internal reader memory, other two for sony's sd and ms card
readers
I type ls /dev/da0* and I see only three devices above, and didnt have
any of
/dev/da0s1 or
Hi ,
I got same problem the mouse is not working under Xwindows.
I solved it anyway.
I installed freebsd 6.2.
Problem is only xorg.conf. you should copy Xorg.config.new to xorg.conf in
X11 directory.
Then it should be ok.
Good luck
Fabio Pennati wrote:
I am a new FreeBSD user
Dear All
This is a amd64 box with FreeBSD 6.3. So far it is only acting as a
firewall (with PF). Yesterday I installed squid via ports with a pretty
vanilla configuration. I.e. no neighbour caches, just to be used as a
standalone cache for users from the inside net. No interception caching
I could use some more detailed information on setting up Xorg- I have a
USB Shintaro wireless keyboard with integrated trackball, and a touch
screen which is not cooperating with my setup. I tried Xorg -configure,
and running xorgconfig, but it still can't seem to find the devices.
Another thing
2008/4/23 Martes G Wigglesworth [EMAIL PROTECTED]:
Is there a particular reason that the USB adapter concept is needed for
your application?
Yes - there are no other ports to extend the (small, embedded) computer with.
___
On Wed, Apr 23, 2008 at 4:18 AM, Ivan Voras [EMAIL PROTECTED] wrote:
Boris Kochergin wrote:
Do you know about http://ralink.rapla.net/? The RT2500-based cards listed
there are supported by the ural(4) driver. There's a discouraging comment
about using them for access points in the man page,
Hey,
OK.. if it is running inside your jail it doesnt respond to WINS
broadcasts (request for NETBIOS Names.. oi, who is Machine on this
subnet???), if it is not running in your jail, it is.
I wouldn't say WINS broadcasts but NetBIOS broadcasts, yes. Machine
is jailed Samba 3 server - I want
Hi list,
I've got some problems with full sockets on one FreeBSD 6.2 system
acting as a loadbalancer for a webfarm.
Sometimes I get some errors like these from different daemons:
haproxy[46932]: Proxy my_proxy reached system memory limit at 83
sockets. Please check system tunables.
stunnel:
OK.. if it is running inside your jail it doesnt respond to WINS
broadcasts (request for NETBIOS Names.. oi, who is Machine on this
subnet???), if it is not running in your jail, it is.
I wouldn't say WINS broadcasts but NetBIOS broadcasts, yes. Machine
is jailed Samba 3 server - I want it to
Hi,
This is nota n issue with samba it is a name resolve issue.
Then why is Samba replying to NetBIOS broadcasts very nicely when I put
it outside jail (with the same configuration)? As far as I understand
Samba also provides resolving - NetBIOS resolving via its nmbd.
If you add in
On Wed, 23 Apr 2008 06:55:29 + Oleksandr Rudyk wrote:
I am trying to connect my sony to freebsd via usb cable and see three new
devices:
/dev/da0
/dev/da1
/dev/da2
First one for internal reader memory, other two for sony's sd and ms card
readers
I type ls /dev/da0* and I see only
Hi,
I'm not sending this message to the list as I've not been following the
discussion; I just skimmed thru it.
I hope you don't mind that I sent it to the list too.
I would check too things, a) a firewall (sorry if this has been talked
about, as I said I didn't read it all) or b) enable
[EMAIL PROTECTED] writes:
$ ls -la .wine/dosdevices
total 4
drwxr-xr-x 2 perryh staff 512 Apr 21 00:17 .
drwxr-xr-x 4 perryh staff 512 Apr 22 21:07 ..
lrwxr-xr-x 1 perryh staff8 Apr 21 00:17 a:: - /dev/fd0
Is the second colon intentional
Nejc Škoberne wrote:
Hi,
I'm not sending this message to the list as I've not been following
the discussion; I just skimmed thru it.
I hope you don't mind that I sent it to the list too.
I would check too things, a) a firewall (sorry if this has been talked
about, as I said I didn't read
On Wednesday 23 April 2008 08:11:38 [EMAIL PROTECTED] wrote:
If I were you I'd just try to install Visio under Wine and see how
it goes. That is, mount the install cd, check with winecfg that
Wine can see the mount point as a drive D: or something and then
run wine d:\\setup.exe ...
It did
Christian Zachariasen wrote:
On Wed, Apr 23, 2008 at 4:53 AM, David Reedy Jr [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
On Tuesday 22 April 2008 10:40:25 am Roland Smith wrote:
On Tue, Apr 22, 2008 at 10:08:37AM -0500, David Reedy Jr wrote:
IICR, the print device should
I see in the makefile that --disable-syncprov is listed in the Makefile. I was
wondering what the 'right' way to enable syncprov on openldap23-server ?
CONFIGURE_ARGS+= --disable-syncprov
I tried to change that to --enable-syncprov, but was still getting the same
errors. Is there a
I have stumbled upon Dru Lavigne's article and created my own
7.0-RELEASE amd64 dvd.
The question I ask myself is how could I integrate the livefs into it ?
making it more of a complete medium to have in my arsenal of cds.
thanks,
Pascal S. Clermont
I see in the makefile that --disable-syncprov is listed in the Makefile. I
was wondering what the 'right' way to enable syncprov on openldap23-server ?
CONFIGURE_ARGS+= --disable-syncprov
I tried to change that to --enable-syncprov, but was still getting the same
errors. Is
On Tue, Apr 22, 2008 at 04:00:42PM -0600, Andrew Falanga wrote:
On Tue, Apr 22, 2008 at 3:17 PM, Fraser Tweedale [EMAIL PROTECTED] wrote:
`make buildkernel` in /usr/src does a clean before building. You most
likely are missing something in your kernel config (i.e. a device that is
depended
I've found a perfect match for my needs: D-Link DWL-G122, with the rum
driver. Not a single problem so far, everything works as documented.
Truly a plug and play experience.
I'm just curious about one more thing: I wish to set up a b/g network,
so both b and g devices can connect. Apparently
Thx for reply.
When I am triying to mount reader internal memory
mount /dev/da0 /mnt/usb I got error: Device not configured
Also I can not take off card because it is not inside ebook, only
empty card reader present.
May be linux partisions should be mounted in different manner?
2008/4/23,
On Wednesday 23 April 2008 11:57:28 am Ivan Voras wrote:
I've found a perfect match for my needs: D-Link DWL-G122, with the
rum driver. Not a single problem so far, everything works as
documented. Truly a plug and play experience.
I'm just curious about one more thing: I wish to set up a b/g
I've got an issue on a new 7.0 amd64 box (first one I've setup with
amd64). When I dump tiny file systems (24M and 12K for example), dump
runs file. When I dump something larger (202M and 2G for example), it
hangs and stops writing. The command I'm running is:
dump -0uan -L -f
Here's dmesg from my system...it's a Dell PowerEdge 2850
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD
On Mon, Apr 21, 2008 at 07:53:48PM +0200, Niels Kobschaetzki wrote:
Hi!
Anyone on the list that can tell me which software is usable under
FreeBSD as an edict-client? I just do not get gjiten compiled and I
don't know other useful ones…
textproc/dict
dict -h nihongobenkyo.org 水
Brian McCann wrote:
On Wed, Apr 23, 2008 at 12:58 PM, Brian McCann [EMAIL PROTECTED] wrote:
I've got an issue on a new 7.0 amd64 box (first one I've setup with
amd64). When I dump tiny file systems (24M and 12K for example), dump
runs file. When I dump something larger (202M and 2G for
$ ls -la .wine/dosdevices
total 4
drwxr-xr-x 2 perryh staff 512 Apr 21 00:17 .
drwxr-xr-x 4 perryh staff 512 Apr 22 21:07 ..
lrwxr-xr-x 1 perryh staff8 Apr 21 00:17 a:: - /dev/fd0
Is the second colon intentional
Yes! That is exactly what the manpage
I also have the same trouble, FreeBSD 7.0 using portupgrade -ar
Sam Fourman Jr.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wed, 23 Apr 2008, Zbigniew Szalbot wrote:
Hello,
I would like to implement traffic shaping using pf. I know I need to
recompile kernel to be able to achieve this but I have a more general
question. I used to have pf with traffic shaping on a Pentium III 866
before and as soon as I
John Nielsen wrote:
On Wednesday 23 April 2008 11:57:28 am Ivan Voras wrote:
I've found a perfect match for my needs: D-Link DWL-G122, with the
rum driver. Not a single problem so far, everything works as
documented. Truly a plug and play experience.
I'm just curious about one more thing: I
The results of my investigation so far are below:
Filesystem stuff:
- it appears that FreeBSD and OpenBSD use the same partition
table format. Is this true? If so, I can potentially avoid
rebuilding an entire disk if I am right that ...
- FreeBSD can mount and read OpenBSD's version
Hi,
is there an easy way to find the port that will install me a specific
file? So far, I only found the following:
# find /usr/ports -name pkg-plist | xargs -I {} grep -H 'bin/wish' {}
/usr/ports/chinese/tk83/pkg-plist:bin/wish%%TK_VER%%
/usr/ports/devel/sourcenav/pkg-plist:bin/wish8.3
Hi,
We have recently upgraded a machine that runs a Linux app from 4.11 to
7-STABLE. Most things are just fine apart from the app can only be
started once. If stopped and then restarted, we see
semget error
Server Stopped
Googling and reading led me to ipcs and ipcrm:
(after stopping the
I'm going off of the handbook section for setting up IPsec but I'm
having some problems because I'm having to modify the instructions
some. The handbook section covers a VPN secured by IPsec, but I'm
trying to setup a point-to-point between my host and another.
All seemed to be going well. I've
On Wednesday 23 April 2008 18:25:51 Sam Fourman Jr. wrote:
I also have the same trouble, FreeBSD 7.0 using portupgrade -ar
Sam Fourman Jr.
I had the same problem and had to remove lsof and one other package so that I
could upgrade other packages/ports.
Hi all,
I recently built a custom kernel for my new FreeBSD 7.0-RELEASE system, and it
is working well. Sadly, I had to purchase and swap out a nic on this machine
today. The new card is a D-link DGE-530T which shall work with the 'sk'
driver. My custom kernel does not have this driver.
I
In the future, please don't reply on top, but on the bottom of the original.
No problem
The default location is /var/crash. Look for files named vmcore.N, where
N is a number.
Yes there is.
What kind of USB chip do you have on the motherboard? Try 'dmesg | grep
^usb' and post the output.
Hello everyone,
With FreeBSD 6.2-Release, I added the option NO_OPENSSH=true in the
make.conf I use to build jails. But, I just rebuilded a jail in FreeBSD
7-Release and I realized at the mergemaster step of the update that
there were a lot of files related to OpenSSH that needed to be
In the last episode (Apr 23), FreeBSD said:
Hello everyone,
With FreeBSD 6.2-Release, I added the option NO_OPENSSH=true in the
make.conf I use to build jails. But, I just rebuilded a jail in FreeBSD
7-Release and I realized at the mergemaster step of the update that there
were a lot of
quoth the darren kirby:
Please disregard. I have realized the module is called if_sk.ko, not sk.ko, so
it is in fact built...
-d
--
darren kirby :: Part of the problem since 1976 :: http://badcomputer.org
...the number of UNIX installations has grown to 10, with more expected...
- Dennis
On Wed, April 23, 2008 18:16, Nejc Å koberne wrote:
Hi,
This is nota n issue with samba it is a name resolve issue.
Then why is Samba replying to NetBIOS broadcasts very nicely when I put
it outside jail (with the same configuration)? As far as I understand
Samba also provides resolving -
Hi,
I'm looking for FreeBSD Media Pack (Genuine Media Kit) - latest version
Please advice me, where can i found the distributor in Malaysia.
Thanks,
ASURA ALIAS / ZAINAL HJ. HASHIM
ALIFF LINK COMMUNICATION SDN BHD
No. 104-2, Jalan Puteri 5/5,
Bandar Puteri, Puchong,
47100, Selangor,
MALAYSIA.
On Wed, Apr 23, 2008 at 10:10:31PM +0200, Anselm Strauss wrote:
Hi,
is there an easy way to find the port that will install me a specific file?
So far, I only found the following:
# find /usr/ports -name pkg-plist | xargs -I {} grep -H 'bin/wish' {}
That's the right way to do it, but
Hi all,
I have installed Compiz Fusion on my machine, which has Intel 965G chipset,
using packages. I am running it on Xfce 4.4.2 on X.org 7.3_1 on FreeBSD
7.0-RELEASE. Compiz starts fine and is working fine, but I have some
problems with it, as follows.
My xorg.conf is uploaded to
Hi Luke,
On Wed, 23 Apr 2008 12:40:04 -0700 (PDT), Luke Dean [EMAIL PROTECTED]
wrote:
On Wed, 23 Apr 2008, Zbigniew Szalbot wrote:
Hello,
I would like to implement traffic shaping using pf. I know I need to
recompile kernel to be able to achieve this but I have a more general
On Tue, Apr 15, 2008 at 07:34:35PM +0200, Mel wrote:
On Tuesday 15 April 2008 18:07:42 Ashant Chalasani wrote:
Is there a way to install a port without the man-pages. I'm trying to
install a dhcp server onto a Tinybsd image and end up buying myself a
bunch of files in /man, as seen at
49 matches
Mail list logo