Is the RealTek RTL8112L PCIe gigabit LAN Controller support in FreeBSD 7.2?
I could not find this in the hardware notes. Is it listed under another
name?
___
freebsd-questions@freebsd.org mailing list
On Tue, 10 Nov 2009 23:38:27 +0100
Polytropon Polytropon free...@edvax.de replied:
On Tue, 10 Nov 2009 17:13:12 -0500, Carmel carmel...@hotmail.com
wrote:
'X' has nothing to do with it. It fails to work both in and out of
'X'. With the old mouse it worked fine.
The moused program offers a
Hi All,
I've a patch to opencrypto and I have a crypto driver that I would
like to present for inclusion with the freebsd 7 release. Could you
give me some pointers on getting that done?
The opencrypto patch is relavent for FreeBSD 8 and 9 also...
Some questions for the driver release:
Hi all,
I've a bit of an annoying problem that hopefully someone
here has delt with before. I have a large(ish) number of ssh keys as i
like to keep things nicely seperated, I also use longish passphrases. To
deal with long pass phrases I have started to use ssh-agent, which is
El día Wednesday, November 11, 2009 a las 03:09:44PM +, Vincent Hoffman
escribió:
Hi all,
I've a bit of an annoying problem that hopefully someone
here has delt with before. I have a large(ish) number of ssh keys as i
like to keep things nicely seperated, I also use longish
On 9. 11. 2009 1:27, umage wrote:
When the connection goes down and comes back up it will take 5 minutes
before my FreeBSD gateway box checks the lease and decides if a
renewal is
in order. This is automatic. If I am sitting in front of my computer
and I
want to speed this up I issue
2009/11/11 Matthias Apitz g...@unixarea.de
El día Wednesday, November 11, 2009 a las 03:09:44PM +, Vincent Hoffman
escribió:
Hi all,
I've a bit of an annoying problem that hopefully someone
here has delt with before. I have a large(ish) number of ssh keys as i
like to
This is happening because in freebsd the stack protector is enabled by default.
When you build ruby enterprise edition set to the CFLAGS / CXXFLAGS the
-fno-stack-protector parameter.
From a security perspective, I don't think that this is the best solution.
On Nov 10, 2009, at 8:45 PM,
Hi there, i have a problem here, i installed windows in mi box and i left a
partition for freebsd, i finished install of freebsd and installed the boot
mgr of freebsd but when i reboot only windows boots with f1 pressed? how can
I make the system boots both?
On Wed, Nov 11, 2009 at 11:02:35AM -0600, Jesús Abidan wrote:
Hi there, i have a problem here, i installed windows in mi box and i left a
partition for freebsd, i finished install of freebsd and installed the boot
mgr of freebsd but when i reboot only windows boots with f1 pressed? how can
I
On Wed, Nov 11, 2009 at 11:02 AM, Jesús Abidan jabi...@gmail.com wrote:
Hi there, i have a problem here, i installed windows in mi box and i left a
partition for freebsd, i finished install of freebsd and installed the boot
mgr of freebsd but when i reboot only windows boots with f1 pressed?
I just built a brand new 7.2 STABLE machine, and the xorg package. startx
brings up a nice screen, but neither the mouse, nor the keyboard (both USB)
function in X.
I have not created a /etx/X11/ config file yet. Do I need to do so? If so,
what;s the best way?
--
A: Because it messes up the
On Wed, Nov 11, 2009 at 12:27:13PM -0600, Jesús Abidan wrote:
i pressed f2 for freebsd and nothing happens... i pressed f1 for windows.
I install freebsd on the first partition and now it occurs the viceversa, i
cannot boot windows, does it have to be something with the order of the
Hi guys,
I appreciate the help you have given me in the past and present... I am
not competent to handle the project we are emarking on, so let me ask
(offer ?) it here:
We're about to start new enterprise in the food service sector (I hate
the terms industry for anything related to food) which is
Hey everyone,
I'm trying to run a java application which uses JNA to use the native
FFTW libraries. The application was given as a netbeans project which
was configured for use in Windows. I changed the paths to the windows
libraries to the FreeBSD versions. However when I try to start the
On 11/11/09, stan st...@panix.com wrote:
I just built a brand new 7.2 STABLE machine, and the xorg package. startx
brings up a nice screen, but neither the mouse, nor the keyboard (both USB)
function in X.
I have not created a /etx/X11/ config file yet. Do I need to do so? If so,
what;s the
On Wed, Nov 11, 2009 at 01:22:58PM -0600, Jesús Abidan wrote:
ok. the slices in freebsd are little tricky, i will check my installation
and send some feedback later.
?? FreeBSD slices are pretty straight forward. They are just the
name of the 4 primary divisions of a disk - limited to 4 by
In the last episode (Nov 11), Frank Staals said:
I'm trying to run a java application which uses JNA to use the native FFTW
libraries. The application was given as a netbeans project which was
configured for use in Windows. I changed the paths to the windows
libraries to the FreeBSD
I am having great difficulty running a very simple assembler program on
FreeBSD on x86 in my efforts to learn some assembly programming on
FreeBSD. I have tried to compile the following with nasm, however i get
nothing in response when I attempt to run this program:
section .data
umage wrote:
[snip]
In my case the router does get the renewed ip, as I described earlier.
However, even after waiting 8+ hours, the system will not recover from
the outage properly (reason unknown). That's what this thread is all
about.
When I started the system today, I found that again it
I am having great difficulty running a very simple assembler program on
FreeBSD on x86 in my efforts to learn some assembly programming on
FreeBSD. I have tried to compile the following with nasm, however i get
nothing in response when I attempt to run this program:
section .data
I have a fairly old install and not much room on my ROOT is there a way to
prevent freebsd-update from installing .symbols files.
Thanks,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
2009/11/11 Jerry McAllister jerr...@msu.edu wrote:
snip
That is because MS-Win doesn't play
very well if installed later and/or in a different slice.
Windows behaves fine for me whatever slice it's installed in.
What IS important is that it's installed first, as you said before.
You can
On Wednesday 11 November 2009 21:43:21 David Jackson wrote:
I am having great difficulty running a very simple assembler program on
FreeBSD on x86 in my efforts to learn some assembly programming on
FreeBSD. I have tried to compile the following with nasm, however i get
nothing in response
This can be the notorious HAL. If you dont need it for another reason you may
compile x11-server again, but switch the hal-support off. Should work well
then..
Cheers
herb langhans
On Wed, Nov 11, 2009 at 12:25:01PM -0500, stan wrote:
I just built a brand new 7.2 STABLE machine, and the xorg
I see supermicro and potentially others have atom servers available,
anyone tried these on freebsd with success?
Brian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
On Thu, Nov 12, 2009 at 4:25 AM, stan st...@panix.com wrote:
I just built a brand new 7.2 STABLE machine, and the xorg package. startx
brings up a nice screen, but neither the mouse, nor the keyboard (both USB)
function in X.
I have not created a /etx/X11/ config file yet. Do I need to do
Hello,
This morning I found that one of my disks was going bad,
so I thought I would replace it (using zpool replace) with
a new disk. This worked fine, and it was about 1/3 of the way through.
Then, as I was moving things around, I accidentally jostled some of
the cables. This of course made
Hello,
This morning I found that one of my disks was going bad,
so I thought I would replace it (using zpool replace) with
a new disk. This worked fine, and it was about 1/3 of the way through.
Then, as I was moving things around, I accidentally jostled some of
the cables. This of course made
On Wed, 11 Nov 2009, Jerry McAllister wrote:
I have heard some complaints about MS-Vista and having to do some
other monkeying around to get an MBR to handle it correctly, but I
don't know details and I do not (lucky me) have any Vista machines
to joust with.
EasyBCD from neosmart.net is an
On Wed, 11 Nov 2009, stan wrote:
I just built a brand new 7.2 STABLE machine, and the xorg package. startx
brings up a nice screen, but neither the mouse, nor the keyboard (both USB)
function in X.
The Handbook has an up-to-date section on xorg configuration:
On Wed 11 Nov 2009 at 11:43:21 PST David Jackson wrote:
I am having great difficulty running a very simple assembler program
on FreeBSD on x86 in my efforts to learn some assembly programming on
FreeBSD. I have tried to compile the following with nasm, however i
get nothing in response when I
On Wed 11 Nov 2009 at 17:32:41 PST Charlie Kester wrote:
One more thing:
Notice that the system call number (or any other dword) should also be
pushed onto the stack before the int 80h.
The reason for this is given at the top of the page:
although the kernel is accessed using int 80h, it
-Original Message-
From: Brian Whalen
Sent: Thu 12/11/2009 9:26 AM
I see supermicro and potentially others have atom servers available,
anyone tried these on freebsd with success?
Brian
Hi Brian
Indeed, I have a FreeBSD 8.0RC1 system running as my primary time
server for the home
34 matches
Mail list logo
