closing out this thread
I did go ahead and buy one of these boards and can now report that
FreeBSD-8.0/i386 boots and runs on it with no apparent problems. A user
in the forums reports similar success running 8.0/amd64.
Extremely quiet and inexpensive board. At around $80, it is one-third
the
On Fri 29 Jan 2010 at 01:36:15 PST Dan Naumov wrote:
Reports of successes with both adm64 andi386 versions of 8.0-RELEASE
and Intel D510MO board have been showing up on a few different
discussion forums now.
I have to correct myself in regard to the Supermicro X7SPA-H board.
The board seems to
On Thu, 28 Jan 2010 13:39:38 -0800, Dixit, Viraj
viraj.di...@cityofpaloalto.org wrote:
Hi,
The script that I have setup does not work if I run the .netrc file. I
ran the commands in ftp -v mode and it did not like machine command, did
not like passwd or pwd etc.
Did you issue the command
Hi,
I have this weird error since yesterday, one a system that used to be
working nicely, suddenly:
ssh cores dump when run as non priviledged user, works fine for root
sshd aborts on signal 11
I tried to reinstall world, but it is the same.
There is openssl installed from the ports on that
Hello
Sorry for the delay. I read again the man page an used the example which
is described there and, how every, now it works as expected (I tried it
many, many times). Thank again.
Regards,
Êîíüêîâ Åâãåíèé schrieb:
Hello, Martin.
First of all you must decide you want your shaper rule
I apologize for ignorance but I have freenas and not sure freebsd is the
same. But the version of freenas I have is:
i386 07.1.4997
I am pretty sure I need the patch. Whenever I reboot my system I get an
error that states the GPT is rejected. If I unplug the power to the hard
drive and reboot
Hi,
I have had to set a FreeBSD up again after the hard disk died.
It runs now on 7.2.
I noticed today that the gam_server opens some 4000 file descriptors.
Ok, I have read
http://www.gnome.org/~veillard/gamin/
All I have found out is that I should increase the number of file descriptors.
On Thu, Jan 28, 2010 at 12:59 PM, James Smallacombe u...@3.am wrote:
To follow up on this: Noticed the issue again this morning, which also was
accompanied by latency so high that I could not connect (some pings got
through at very high latency). I emailed the provider and they told me that
On Fri, Jan 29, 2010 at 10:51 AM, James Smallacombe u...@3.am wrote:
Some updates that may confuse more than inform: I caught this while it was
happening yesterday and was able to do a tcpdump. I saw a ton of UDP
traffic outbound to one IP that turned out to be a colocated server in
Chicago.
Hi--
On Jan 29, 2010, at 8:51 AM, James Smallacombe wrote:
On Thu, Jan 28, 2010 at 12:59 PM, James Smallacombe u...@3.am wrote:
To follow up on this: Noticed the issue again this morning, which also was
accompanied by latency so high that I could not connect (some pings got
through at very
I've noticed that several apps support images of the user, such as KMail,
which supports a 40x40 pixel jpeg.
I have a webcam, but it won't take a monochrome picture and it doesn't
snapshot all the resolutions that it can display in. In particular, I tried
the two lowest and the lowest, sqcif,
On Fri, 29 Jan 2010 12:41:06 -0500, Steven Friedrich free...@insightbb.com
wrote:
I have a webcam, but it won't take a monochrome picture and it doesn't
snapshot all the resolutions that it can display in. In particular, I tried
the two lowest and the lowest, sqcif, isn't supported by my
On Jan 29, 2010, at 9:41 AM, Steven Friedrich wrote:
I've noticed that several apps support images of the user, such as KMail,
which supports a 40x40 pixel jpeg.
I have a webcam, but it won't take a monochrome picture and it doesn't
snapshot all the resolutions that it can display in. In
On 1/28/2010 6:51 PM, Adam Vande More wrote:
On Thu, Jan 28, 2010 at 10:42 AM, Nikos Vassiliadisnvass9...@gmx.comwrote:
Hi,
I am using a 40MB journal on a 500MB compact flash.
Would that be sane, or I am causing more harm than
good?
My concerns are:
1) wear leveling. The journal is on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
my FreeBSD seems to be broken, since I get the following error when
trying to link against libssl etc:
/libexec/ld-elf.so.1: /usr/local/lib/libssl.so.6: Undefined symbol
EVP_idea_cbc
I am using openssl-0.9.8k_5 from the base system 8.0.
uname
Hi--
On Jan 29, 2010, at 11:29 AM, Ronny Forberger wrote:
my FreeBSD seems to be broken, since I get the following error when
trying to link against libssl etc:
/libexec/ld-elf.so.1: /usr/local/lib/libssl.so.6: Undefined symbol
EVP_idea_cbc
I am using openssl-0.9.8k_5 from the base
hello, world\n
I have a system with a handful of kernels I chose from with grub.
Recently compiled 8-STABLE systems show strange printing behaviour.
While a one year old 8.0-CURRENT #0 r185532 has no problem printing to
my HP Laserjet 2300d (via cups and USB/ulpt0), newer systems and even
First time I installed FreeBSD (yes, there was a first time, I managed
to hose the root account and had to start over again) I was asked
something about whether or not my vid card was PCI or AGP. I answered
AGP (as that is all I have that is halfway decent). I had Xorg up and
running with minimum
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Chuck Swiger schrieb:
Hi--
On Jan 29, 2010, at 11:29 AM, Ronny Forberger wrote:
my FreeBSD seems to be broken, since I get the following error
when trying to link against libssl etc:
/libexec/ld-elf.so.1: /usr/local/lib/libssl.so.6: Undefined
On Jan 29, 2010, at 12:22 PM, Ronny Forberger wrote:
Thanks for the help. I installed from a binary package using pkg_add
- -r openssl since I cannot build openssl from ports:
[r...@sonne ~]# portupgrade -f openssl
** Port marked as IGNORE: security/openssl:
is marked as broken: No
As expected several port needed to be rebuilt however I have hit a
roadblock with the built in perl with.
===Verifying install for /usr/local/lib/perl5/site_perl/5.8.8/
Date/Parse.pm in /usr/ports/devel/p5-TimeDate
=== p5-TimeDate-1.20,1 depends on file: /usr/local/bin/perl5.8.8 -
Hi--
On Jan 29, 2010, at 12:45 PM, mikel king wrote:
[ ... ]
I would have thought that perl was rebuilt when I make the world and upgraded
from 7.x to 8.0.
Anyone have a quick and easy fix out of this mess?
perl isn't part of FreeBSD 7.x; hence, it was not rebuilt when you upgraded to
I just upgraded to FBSD 8.0 from 6.4 and I'm having a problem with
sendmail passing email to procmail. I only use this combination for
email from root's cron jobs. Right now emails to me from cron go to
/var/mail/ckern1.
Here's my mc file:
divert(-1)
#
# Copyright (c) 1983 Eric P. Allman
#
On Fri, Jan 29, 2010 at 02:59:34PM -0500, Clayton Scott Kern wrote:
I just upgraded to FBSD 8.0 from 6.4 and I'm having a problem with
sendmail passing email to procmail. I only use this combination for
email from root's cron jobs. Right now emails to me from cron go to
/var/mail/ckern1.
I'd like to access the digital media slots on my laptop.
Specifically, I want to read Sony Memory Sticks.
pciconf -lv shows the devices:
no...@pci0:11:0:3: class=0x018000 card=0x3082103c chip=0x8033104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
device =
On Fri 29 Jan 2010 at 12:15:03 PST Programmer In Training wrote:
First time I installed FreeBSD (yes, there was a first time, I managed
to hose the root account and had to start over again) I was asked
something about whether or not my vid card was PCI or AGP. I answered
AGP (as that is all I
On 1/29/2010 4:30 PM, Charlie Kester wrote:
snip
I'm not sure why Xorg isn't seeing your video card. Do you see a device
named agpgart in /dev? If not, it probably means the agp module
couldn't identify your card when you last booted the machine. What's
the make and model of your card, and
On Fri, Jan 29, 2010 at 1:39 PM, Nikos Vassiliadis nvass9...@gmx.comwrote:
fsck time in my case is not an issue. What concerns me mostly is
a situation where user intervention is required. The CF filesystem
will be used in a embedded system and should work without user
intervention. I too
On Friday 29 January 2010 23:14:06 Steven Friedrich wrote:
I'd like to access the digital media slots on my laptop.
Specifically, I want to read Sony Memory Sticks.
pciconf -lv shows the devices:
no...@pci0:11:0:3:class=0x018000 card=0x3082103c chip=0x8033104c rev=0x00
hdr=0x00
on 01-29-2010, David Kelly wrote:
On Fri, Jan 29, 2010 at 02:59:34PM -0500, Clayton Scott Kern wrote:
I just upgraded to FBSD 8.0 from 6.4 and I'm having a problem with
sendmail passing email to procmail. I only use this combination for
email from root's cron jobs. Right now emails to me
on 01-29-2010, David Kelly wrote:
On Fri, Jan 29, 2010 at 02:59:34PM -0500, Clayton Scott Kern wrote:
I just upgraded to FBSD 8.0 from 6.4 and I'm having a problem with
sendmail passing email to procmail. I only use this combination for
email from root's cron jobs. Right now emails to me
What works for you and can you suggest a guide? I haven't setup a BSD server
in 8 years, but my environment will be:
FreeBSD 7.2 Release
x2 HD's (not the same size, if I need to spend the money, on two like
drives, kindly insist)
DNS cache and auth
Postfix MTA
1 user/1 IMAP mailbox less than
Hi,
Danny Edge wrote:
What works for you and can you suggest a guide? I haven't setup a BSD server
in 8 years, but my environment will be:
I've been using gmirror for some time, without problems.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/geom-mirror.html
FreeBSD 7.2
On Fri, Jan 29, 2010 at 11:18 PM, Glen Barber glen.j.bar...@gmail.comwrote:
Hi,
Danny Edge wrote:
What works for you and can you suggest a guide? I haven't setup a BSD
server
in 8 years, but my environment will be:
I've been using gmirror for some time, without problems.
On 29.01.2010 17:09, Erich Dollansky wrote:
I have had to set a FreeBSD up again after the hard disk died.
It runs now on 7.2.
I noticed today that the gam_server opens some 4000 file descriptors.
Ok, I have read
http://www.gnome.org/~veillard/gamin/
All I have found out is that I should
35 matches
Mail list logo
