On Thu, 2 Sep 2010, Greg Larkin wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dennis Glatting wrote:
On Thu, 2 Sep 2010, Lowell Gilbert wrote:
Dennis Glatting free...@penx.com writes:
This has been happening for several days. Is cvsup dead vs SVN? Cvsup
is still listed in the
Hello,
I'm trying to install the port /usr/ports/emulators/vmware-guestd6 (even
the freshest from FreeBSD server) in 8-CURRENT:
current# pwd
/usr/ports/emulators
current# mv vmware-guestd6 vmware-guestd6.old
current# tar xzf ~guru/vmware-guestd6.tar.gz
current# cd vmware-guestd6
current# make
Hello,
I have a patch for clamav that was submited by a developer of clamav.
I don't know how to apply It to the source code of the port.
What I would like to do:
1. Get the source code
2. cd to the source directory
3. Apply the patch
4. Recompile
5. Test
If this is ok, then as an
On Fri, Sep 3, 2010 at 00:59, Matthias Apitz g...@unixarea.de wrote:
Hello,
I'm trying to install the port /usr/ports/emulators/vmware-guestd6 (even
the freshest from FreeBSD server) in 8-CURRENT:
Do you have a particular reason for using this port? Assuming you mean
8.X, the Tools that
Chris Rees utis...@gmail.com wrote:
You have to SIGHUP cron, not restart it.
# killall -HUP cron
Isn't crontab(1) supposed to do that, without separate intervention?
On 2 Sep 2010 21:11, patrick gibblert...@gmail.com wrote:
I recently upgraded a FreeBSD 7.0 system to 8.1-RELEASE (via
El día Friday, September 03, 2010 a las 01:14:00AM -0700, Rob Farmer escribió:
On Fri, Sep 3, 2010 at 00:59, Matthias Apitz g...@unixarea.de wrote:
Hello,
I'm trying to install the port /usr/ports/emulators/vmware-guestd6 (even
the freshest from FreeBSD server) in 8-CURRENT:
Do
Two questions about installing FreeBSD 8.1 on a Dell Precision 420
(yes, I know it's old):
1. Should FreeBSD 8.1 be able to recognize a 100MB ATAPI Zip drive?
I'm not finding it in the dmesg, although BIOS Setup recognizes
it. (It and a CDROM are on the secondary IDE channel; I've tried
On 09/03/10 09:19, per...@pluto.rain.com wrote:
Chris Reesutis...@gmail.com wrote:
You have to SIGHUP cron, not restart it.
# killall -HUP cron
Isn't crontab(1) supposed to do that, without separate intervention?
From man cron
Additionally, cron checks each minute to see if its
Hi,
For point no. 1 you can check if the drive is supported @
http://www.freebsd.org/releases/8.1R/hardware.html.
Sorry, no idea about point no. 2
___
freebsd-questions@freebsd.org mailing list
On 09/02/10 21:25, David Brodbeck wrote:
While doing some interoperability testing between Linux and FreeBSD, I
came up with this unusual issue. I could use some help figuring out
if this is a bug, and if so, where to file it. Here's the scenario:
- FreeBSD 8.1-RELEASE server, sharing a ZFS
El día Friday, September 03, 2010 a las 10:31:43AM +0200, Matthias Apitz
escribió:
The VM is a VMware player 3.0.0 which says about itself
Workstation 6.5-7.0 in the overview about the VM setup for FreeBSD;
is this fine enough for the emulators/open-vm-tools?
emulators/open-vm-tools does
On 03/09/2010 08:53, bsd wrote:
Hello,
I have a patch for clamav that was submited by a developer of clamav.
I don't know how to apply It to the source code of the port.
What I would like to do:
1. Get the source code
2. cd to the source directory
3. Apply the patch
4. Recompile
Hi,
On 9/3/10 4:31 AM, Matthias Apitz wrote:
I'm trying to install the port /usr/ports/emulators/vmware-guestd6 (even
the freshest from FreeBSD server) in 8-CURRENT:
Do you have a particular reason for using this port? Assuming you mean
8.X,
My FreeBSD is a CVS 8-CURRENT from May 2009 to
El día Friday, September 03, 2010 a las 08:51:08AM -0400, Glen Barber escribió:
Hi,
On 9/3/10 4:31 AM, Matthias Apitz wrote:
I'm trying to install the port /usr/ports/emulators/vmware-guestd6 (even
the freshest from FreeBSD server) in 8-CURRENT:
Do you have a particular reason for
per...@pluto.rain.com writes:
Two questions about installing FreeBSD 8.1 on a Dell Precision 420
(yes, I know it's old):
I have a similar machine running as a lab tool.
1. Should FreeBSD 8.1 be able to recognize a 100MB ATAPI Zip drive?
I'm not finding it in the dmesg, although BIOS
bsd b...@todoo.biz writes:
Hello,
I have a patch for clamav that was submited by a developer of clamav.
I don't know how to apply It to the source code of the port.
What I would like to do:
1. Get the source code
2. cd to the source directory
3. Apply the patch
4. Recompile
5.
On Fri, Sep 03, 2010 at 09:11:02AM -0400, Lowell Gilbert wrote:
per...@pluto.rain.com writes:
Two questions about installing FreeBSD 8.1 on a Dell Precision 420
(yes, I know it's old):
I have a similar machine running as a lab tool.
1. Should FreeBSD 8.1 be able to recognize a 100MB
Thanks for the info. Now I am getting more such error messages and the
disk fails at boot when trying to mount on /usr.
Xihong
On Thu, 2 Sep 2010, Lowell Gilbert wrote:
Mike Jeays mike.je...@rogers.com writes:
On September 1, 2010 10:29:42 pm Xihong Yin wrote:
Hi,
I received the
Xihong Yin x...@gmx.com writes:
Thanks for the info. Now I am getting more such error messages and the
disk fails at boot when trying to mount on /usr.
On the chance the disk can be saved, you may want to try the
manufacturer's diagnostics.
___
I have been writing a script to build a system from a
mfsboot startup and it is going well but I want to revisit part
of the script that I don't think I did a very good job with.
Is there an automatic way to tell which of the devices
shown in /dev is a likely system drive? This is
Thought you might find this interesting and, hopefully helpful Subscriber.
Another article written by our CEO, Sanjay Bhatia.
High Performance Custom Fields for Multi-Tenant SaaS Architectures
This article shows a simple way to give applications with [1]multi-tenant
architectures the ability to
On Fri, Sep 3, 2010 at 9:10 AM, Martin McCormick
mar...@dc.cis.okstate.eduwrote:
I have been writing a script to build a system from a
mfsboot startup and it is going well but I want to revisit part
of the script that I don't think I did a very good job with.
Is there an
Hi, all:
Is carp a part of freebsd 8.1? or I have to download from somewhere and install
it?
Thanks in advance
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hi, all:
Is carp a part of freebsd 8.1? or I have to download from somewhere and
install it?
Thanks in advance
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Adam Vande More writes:
Would doing something like:
gpart list
help?
Thank you. I have never heard of gpart before so I gave
it a try and that helps very much if the drive is already
formatted. Most of these drives I plan to encounter will be
formatted so this basically solves the
On 3 September 2010 10:37, gahn ipfr...@yahoo.com wrote:
Is carp a part of freebsd 8.1? or I have to download from somewhere and
install it?
Everything you could want to know about CARP and FreeBSD:
http://www.freebsd.org/doc/handbook/carp.html
On my 8.1 box -
fbsdsroute0# sysctl
On Fri, Sep 3, 2010 at 10:04 AM, Martin McCormick
mar...@x.it.okstate.eduwrote:
Thank you. I have never heard of gpart before so I gave
it a try and that helps very much if the drive is already
formatted. Most of these drives I plan to encounter will be
formatted so this basically
Thanks, Ivan. I'll pursue it there.
If it's not ready for prime time yet, I understand, but I'd also like
to help nudge it in that direction. :)
On Fri, Sep 3, 2010 at 2:57 AM, Ivan Voras ivo...@freebsd.org wrote:
On 09/02/10 21:25, David Brodbeck wrote:
While doing some interoperability
Any thoughts? I need/want to get a multi-port NIC for my new system but I
haven't purchased the guts for the server yet.
Hello,
I have experience in freebsd but never did such system architecture
migration.
Is it possible to do safely with only SSH access (or IP-KVM)?
I'm planning to upgrade system from 7.2 to 7.3 but it's i386..
Regards,
Elifan
___
AFAIK,basically no
x86 - x86
and
x64 - x64
Non-basically ... yes but it's a real pain in the @$$ and you will
definitely run in all kinds of trouble.
ip you have KVM access, just put a x64 DVD inside and do a clean install (it
will keep your sanity intact)
Yes, it's definitely updating:
[r...@juno /var/cron/tabs]# ls -ald /var/cron/tabs
drwx-- 2 root wheel 512 Sep 2 12:49 /var/cron/tabs
And after editing my crontab:
[r...@juno /var/cron/tabs]# ls -ald /var/cron/tabs
drwx-- 2 root wheel 512 Sep 3 10:25 /var/cron/tabs
I've been
Ryan Coleman writes:
Any thoughts? I need/want to get a multi-port NIC for my new
system but I haven't purchased the guts for the server yet.
2010/8/17 Roland Smith rsm...@xs4all.nl:
On Tue, Aug 17, 2010 at 12:09:23AM +0200, David DEMELIER wrote:
Does /dev/pts/0 actually exist in the jail's devfs instance, and are its
permissions correct?
(In jail) :
# ls -l /dev/pts/*
crw--w 1 markand tty 0, 94 17 Aug 00:06
2010/9/3 David DEMELIER demelier.da...@gmail.com:
2010/8/17 Roland Smith rsm...@xs4all.nl:
On Tue, Aug 17, 2010 at 12:09:23AM +0200, David DEMELIER wrote:
Does /dev/pts/0 actually exist in the jail's devfs instance, and are its
permissions correct?
(In jail) :
# ls -l /dev/pts/*
I use procmail for mail delivery and I'm trying to concoct the right
regex to match From: headers and deliver to a folder. However mail is
sent from various addresses so I want to match all that end with
famous-smoke.com. Here's an example of a header:
From: Famous Smoke
Hi Drew,
On 9/3/10 2:45 PM, Drew Tomlinson wrote:
I use procmail for mail delivery and I'm trying to concoct the right
regex to match From: headers and deliver to a folder. However mail is
sent from various addresses so I want to match all that end with
famous-smoke.com. Here's an example
I seem to recall that there is some sort of stub that
will let one execute a script which runs at the last stage of
the boot process but I can't seem to remember enough to look it
up.
I need to run a small script to do pwd_mkdb just once to
sync the passwd data base after booting
creating a /etc/rc.local that rm itself?
or, if you already have a rc.local, calling there a script that would self
desctruct after beeing launched.
Samuel Martín Moro
{EPITECH.} tek4
CamTrace S.A.S
(+033) 1 41 38 37 60
1 Allée de la Venelle
92150 Suresnes
FRANCE
Nobody wants to say how
From owner-freebsd-questi...@freebsd.org Fri Sep 3 14:13:18 2010
To: freebsd-questions@freebsd.org
Date: Fri, 03 Sep 2010 14:13:33 -0500
From: Martin McCormick mar...@dc.cis.okstate.edu
Subject: Need to run a Command Once on Boot. FreeBSD8.1
I seem to recall that there is some sort
Robert Bonomi writes:
/etc/rc.local maybe? contrary to the 'rc.d' way of doing things, but
'simple'. :)
Thanks so much to both people who answered. I thought
there was more to it than that but I may be thinking of the
rcx.d directories in Linux. If you don't watch out, you can be
On Fri, Sep 3, 2010 at 06:01, Matthias Apitz g...@unixarea.de wrote:
I tried to install the vmware-freebsd-tools.tar.gz directly as
VMWare.com it provides (I have compat6x already installed for some other
reason). But in vmware-freebsd-tools.tar.gz there are only kernel
modules for FreeBSD 6
My meaning in the 'subject' is:
Currently we want to: 'options QUOTA' in the kernel. We do not want to
compile any modules that we don't have to (effort to save time). If
adding support for 'QUOTA' doesn't require any module rebuilding, how do
we specify/exclude 'all' module building using
On Thu, Sep 2, 2010 at 9:45 AM, Peggy Wilkins enli...@gmail.com wrote:
On Fri, Jun 18, 2010 at 2:32 AM, Mark Stapper st...@mapper.nl wrote:
Since updating to 8.X I noticed that network services were started
before the network was up!
I use lagg failover configuration on both my FreeBSD boxes.
On Fri, Sep 03, 2010 at 02:50:48PM -0500, Martin McCormick thus spake:
Robert Bonomi writes:
/etc/rc.local maybe? contrary to the 'rc.d' way of doing things, but
'simple'. :)
Thanks so much to both people who answered. I thought
there was more to it than that but I may be thinking
On Fri, Sep 03, 2010 at 08:40:01PM +0200, David DEMELIER wrote:
Sorry I made a mistake while I was writing. In fact there is the
permissions in the jail :
mark...@orange ~ $ sudo jexec 1 tcsh
# su -
People# ls -l /dev/pts/*
crw--w 1 zazak tty0, 118 3 Sep 20:39 /dev/pts/0
I have several Intel multi-port, (2 port, 4 port and even some 2 port
fibre-optic), cards in use. All have been rock-solid, stable performers, and
have hardware VLAN tagging and trunking capability. I have some 4 port cards
in use with LACP+VLAN Trunking, and then use vlan interfaces in FreeBSD
2010/9/3 Roland Smith rsm...@xs4all.nl:
On Fri, Sep 03, 2010 at 08:40:01PM +0200, David DEMELIER wrote:
Sorry I made a mistake while I was writing. In fact there is the
permissions in the jail :
mark...@orange ~ $ sudo jexec 1 tcsh
# su -
People# ls -l /dev/pts/*
crw--w 1 zazak tty
Hi Glen,
Thank you for your reply.
On 9/3/2010 12:02 PM, Glen Barber wrote:
Hi Drew,
On 9/3/10 2:45 PM, Drew Tomlinson wrote:
I use procmail for mail delivery and I'm trying to concoct the right
regex to match From: headers and deliver to a folder. However mail is
sent from various
Thanks. I cloned the hard drive and replaced the old drive with the new drive
this afternoon.
---
At 09:25 AM 8/30/2010, Ivan Voras wrote:
On 08/30/10 13:24, pe...@vfemail.net wrote:
When I awoke this morning my FreeBSD box was frozen -- completely
unresponsive at the console -- and
I have webcamd running and can see my webcam using mplayer like this:
mplayer tv:// -tv driver=v4l2:width=640:height=480:fps=30:device=/dev/video0
But skype can't see the video. It only sees /dev/video0 device but when
I try testing it image is black.
v4l support was recently added into 8.1:
On Fri, Sep 3, 2010 at 7:27 PM, Yuri y...@rawbw.com wrote:
I have webcamd running and can see my webcam using mplayer like this:
mplayer tv:// -tv driver=v4l2:width=640:height=480:fps=30:device=/dev/video0
I think this has come up a few times recently on the list, check the
archives to see if
On Fri, Sep 3, 2010 at 8:44 PM, Alejandro Imass a...@p2ee.org wrote:
On Fri, Sep 3, 2010 at 7:27 PM, Yuri y...@rawbw.com wrote:
I have webcamd running and can see my webcam using mplayer like this:
mplayer tv:// -tv driver=v4l2:width=640:height=480:fps=30:device=/dev/video0
I think this has
53 matches
Mail list logo
