Hello,
Distrowatch has you slated to release 9.0-RC1 on 8/24. I cannot find the
release for download. Is this delayed and is there a new release
date/schedule?
Thank you,
Nathaniel Torbett
___
freebsd-questions@freebsd.org mailing list
Sorry,
forgot to include the list!
Original-Nachricht
Betreff: Re: 9.0-RC1 Release?
Datum: Fri, 26 Aug 2011 13:28:51 +0200
Von: Kruppa, Peter Ulrich ulr...@pukruppa.de
An: Nathaniel Torbett nathaniel.torb...@gmail.com
Hi,
Am 26.08.2011 08:52, schrieb Nathaniel Torbett:
http://wiki.freebsd.org/Releng/9.0TODO
CAUTION: FreeBSD Release Schedules may slip so the above dates are not
guaranteed.
On 08/26/2011 08:52, Nathaniel Torbett wrote:
Hello,
Distrowatch has you slated to release 9.0-RC1 on 8/24. I cannot find the
release for download. Is this delayed and
I am trying to set up CARP under 9.0
I want to know if my assumptions are right.
The master is the server with the lowest advskew, and has the state MASTER, as
where the slave will be in state BACKUP.
If the master fails, the slave will be promoted to MASTER.
If the master comes backup, the
On Fri, Aug 26, 2011 at 01:52:02AM -0500, Nathaniel Torbett wrote:
Hello,
Distrowatch has you slated to release 9.0-RC1 on 8/24. I cannot find the
release for download. Is this delayed and is there a new release
date/schedule?
Anyone, even Distrowatch, who posts a specific date for a
On Fri, Aug 26, 2011 at 10:51:28AM -0400, Jerry McAllister wrote:
On Fri, Aug 26, 2011 at 01:52:02AM -0500, Nathaniel Torbett wrote:
Distrowatch has you slated to release 9.0-RC1 on 8/24. I cannot find the
release for download. Is this delayed and is there a new release
date/schedule?
Le Fri, 26 Aug 2011 14:26:24 +,
Johan Hendriks jo...@double-l.nl a écrit :
Ifconfig on the master
carp0: flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500
inet 192.168.50.45 netmask 0xff00
nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL
carp: MASTER vhid 1
I am trying to set up CARP under 9.0
I want to know if my assumptions are right.
The master is the server with the lowest advskew, and has the state MASTER, as
where the slave will be in state BACKUP.
If the master fails, the slave will be promoted to MASTER.
If the master comes backup,
Le Fri, 26 Aug 2011 15:26:28 +,
Johan Hendriks jo...@double-l.nl a écrit :
I am trying to set up CARP under 9.0
...
Also with a higer value like advskew 200 or 254 the role of the
servers stays the same.
Ok, there is something wrong so.
Did you check that the sysctl
libnotify-0.7.3_1
notification-daemon-0.7.1
FreeBSD jimmiejaz.org 8.2-STABLE FreeBSD 8.2-STABLE #0: Sun Jun 26
08:42:45 EDT 2011 jim...@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO
i386
After following the portupgrade steps to update libnotify and libproxy
(notification-daemon got
How about:
%sudo netstat -s carp
...on both machines.
A few years ago I submitted (or maybe it was Steve Polyack) a patch to add
debugging to CARP, not sure if it ever got commited.
Need-more-Cisco'sih-Debugging.
~BAS
On Fri, 26 Aug 2011, Patrick Lamaiziere wrote:
Le Fri, 26 Aug
I am seeing a couple of things that are concerning me.
First, I am not seeing any traffic over the gif interface, except return
traffic. For example if I ping from one of my sites (e.g.
10.129.30.0/24), I do not see any traffic on the gif interface.
Second, I am seeing the following error
On 8/26/2011 1:42 PM, jh...@socket.net wrote:
I am seeing a couple of things that are concerning me.
First, I am not seeing any traffic over the gif interface, except return
traffic. For example if I ping from one of my sites (e.g.
10.129.30.0/24), I do not see any traffic on the gif
How about:
%sudo netstat -s carp
...on both machines.
A few years ago I submitted (or maybe it was Steve Polyack) a patch to add
debugging to CARP, not sure if it ever got commited.
Need-more-Cisco'sih-Debugging.
~BAS
On Fri, 26 Aug 2011, Patrick Lamaiziere wrote:
Le Fri, 26 Aug 2011
On the basis of what I now believe was malicious advice, I am out of pocket
for a USB US Robotics 56k dialup modem. However, this device attaches as a
ugen device. I haven't found a way to make ppp on demand work with it
attached that way.
I do not load umass because I am using hplip and it
El día Friday, August 26, 2011 a las 01:34:03PM -0500, Lars Eighner escribió:
On the basis of what I now believe was malicious advice, I am out of pocket
for a USB US Robotics 56k dialup modem. However, this device attaches as a
ugen device. I haven't found a way to make ppp on demand work
IP-IP interface ? (GIF). If you are using that, then you will need very
different policies on both sides. You should mention these little
details when posting your configs. Can you please post your FULL
configuration / topology.
On 08/25/2011 06:38 PM, Robert Bonomi wrote:
From owner-freebsd-questi...@freebsd.org Thu Aug 25 13:57:20 2011
Date: Thu, 25 Aug 2011 14:24:57 -0400
From: Renee Gehlbachfbsd...@gehlbach.com
To: questi...@freebsd.org
Cc:
Subject: Problem reading from tape drive
I recently purchased a
On 8/26/2011 2:40 PM, jh...@socket.net wrote:
IP-IP interface ? (GIF). If you are using that, then you will need very
different policies on both sides. You should mention these little
details when posting your configs. Can you please
Le Fri, 26 Aug 2011 18:22:37 +,
Johan Hendriks jo...@double-l.nl a écrit :
net.inet.carp.preempt: 0
You said it was equal to 1 on both machines. It should be at 1.
___
freebsd-questions@freebsd.org mailing list
Le Fri, 26 Aug 2011 18:22:37 +,
Johan Hendriks jo...@double-l.nl a écrit :
net.inet.carp.preempt: 0
You said it was equal to 1 on both machines. It should be at 1.
Luckely i used the slave for that. :D
I need to work on my copy paste techniques.
The master had indeed
On Fri, Aug 26, 2011 at 01:34:03PM -0500, Lars Eighner wrote:
On the basis of what I now believe was malicious advice, I am out of pocket
for a USB US Robotics 56k dialup modem. However, this device attaches as a
ugen device. I haven't found a way to make ppp on demand work with it
On 8/26/2011 3:21 PM, Erik Trulsson wrote:
So I am asking again: does anyone have a dialup modem of any kind which
works correctly on 8.x to provide ppp-on-demand? If so what is it?
(As for promises about what *will* 100% guaranteed work, which seems to
be what you really want, I am afraid I
What does their policy look like ? Are they really setting up an IP-IP
tunnel on their side too ? Or just a regular ESP IPSEC tunnel. If they
are not setting up an IP-IP tunnel, than get rid of the gif interface.
I have sent them an email, and I am waiting hear from them. I do have the
Yes, post that to the list.
I am not sure if this is the entire configuration or not, but this is what
they have posted.
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map rackmap 201 match address 201
On Fri, 26 Aug 2011, Mike Tancsa wrote:
On 8/26/2011 3:21 PM, Erik Trulsson wrote:
So I am asking again: does anyone have a dialup modem of any kind which
works correctly on 8.x to provide ppp-on-demand? If so what is it?
(As for promises about what *will* 100% guaranteed work, which seems to
I am teaching myself python and have 2.6 installed. What is the proper way to
install py26-setuptools? As 2.7 is the default it appears that I can neither use
pkg_add nor build from the ports tree.
I can download the source and the 2.6 egg. It appears that I need to configure
the egg for
From owner-freebsd-questi...@freebsd.org Fri Aug 26 18:21:24 2011
Date: Fri, 26 Aug 2011 18:19:13 -0500 (CDT)
From: Lars Eighner luvbeas...@larseighner.com
To: Mike Tancsa m...@sentex.net
Cc: freebsd-questions@freebsd.org
Subject: Re: What USB dialup modem WILL work with 8.2?
On Fri, 26
From owner-freebsd-questi...@freebsd.org Fri Aug 26 13:51:51 2011
Date: Fri, 26 Aug 2011 14:50:23 -0400
From: Renee Gehlbach fbsd...@gehlbach.com
To: questi...@freebsd.org
Cc:
Subject: Re: Problem reading from tape drive
On 08/25/2011 06:38 PM, Robert Bonomi wrote:
From
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 8/26/11 8:07 PM, doug wrote:
I am teaching myself python and have 2.6 installed. What is the proper
way to install py26-setuptools? As 2.7 is the default it appears that I
can neither use pkg_add nor build from the ports tree.
I can download
On Fri, 26 Aug 2011, Greg Larkin wrote:
On 8/26/11 8:07 PM, doug wrote:
I am teaching myself python and have 2.6 installed. What is the proper
way to install py26-setuptools? As 2.7 is the default it appears that I
can neither use pkg_add nor build from the ports tree.
I can download the
Trying to use labeled devices and filesystems where possible, and adding
gmirror into the mix. (This is with 8-STABLE, i386.)
glabel two disks primary and secondary.
gmirror the two:
gmirror label -v -b round-robin data /dev/label/primary /dev/label/secondary
Use gpart to create *and label*
On 8/26/2011 5:09 PM, jh...@socket.net wrote:
Yes, post that to the list.
I am not sure if this is the entire configuration or not, but this is what
they have posted.
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes
Dear folks,
I am trying to update one of my machines and I ran portmaster -a and got errors:
http://forums.freebsd.org/showthread.php?p=145268
I overcome most by unselecting GNUTLS from cups-image and cups-base,
and then comes
=== Launching child to update libreoffice-3.3.3_2 to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 8/26/11 8:24 PM, d...@safeport.com wrote:
On Fri, 26 Aug 2011, Greg Larkin wrote:
On 8/26/11 8:07 PM, doug wrote:
I am teaching myself python and have 2.6 installed. What is the proper
way to install py26-setuptools? As 2.7 is the default it
On Fri, Aug 26, 2011 at 8:09 PM, Warren Block wbl...@wonkity.com wrote:
Question 2 is maybe simpler. On boot, it shows this:
gptboot: invalid backup GPT header
I can speculate on what causes that (whether the various g-things use the
absolute last block of the device, or the last block of
On Sat, Aug 27, 2011 at 5:33 AM, Antonio Olivares
olivares14...@gmail.com wrote:
Dear folks,
I am trying to update one of my machines and I ran portmaster -a and got
errors:
http://forums.freebsd.org/showthread.php?p=145268
I overcome most by unselecting GNUTLS from cups-image and
On Aug 25, 2011, at 3:39 PM, Noel wrote:
On 8/25/2011 4:26 PM, Devin Teske wrote:
Hi All,
I've got three different workstations each with a Broadcom Gigabit Ethernet
card
(slightly different models, but all running the bge(4) device driver) on
FreeBSD-8.1 RELEASE.
We've having a
On Fri, 26 Aug 2011, Adam Vande More wrote:
On Fri, Aug 26, 2011 at 8:09 PM, Warren Block wbl...@wonkity.com wrote:
Question 2 is maybe simpler. On boot, it shows this:
gptboot: invalid backup GPT header
I can speculate on what causes that (whether the various g-things use
On Fri, 26 Aug 2011, Antonio Olivares wrote:
Is there a way to update most packages except this one?
See
man portmaster | less +2/-x
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Fri, Aug 26, 2011 at 11:04 PM, Warren Block wbl...@wonkity.com wrote:
So it's cosmetic, but not really the kind of message that instills
confidence. gptboot needs to be able to tell if it's reading from a
gmirror. Or gmirror should provide one block less than it does, so it
doesn't
Ross == Ross basarev...@gmail.com writes:
Ross Maybe I spent to little time with portmaster, but I eventually
Ross switched to portupgrade. I'ts more mature in my opinion. And
Ross portupgrade -a doesn't have the problem you are referring to.
I started with portupgrade, and am now firmly in
42 matches
Mail list logo