> My other concern is what happens when one drive goes down if we use
> gmirror? Is it completelly transparent
> and bad drive can be hot swapped while server is running and rebuild
> started?
> I am thinking now about gpt+gmirror (including boot and swap)
>
> Artem
>
Yes. In fact, you can test th
On 29 January 2013, at 20:25, d...@safeport.com wrote:
>
> On Tue, 29 Jan 2013, Doug Hardie wrote:
>
>> On 29 January 2013, at 07:18, Mario Lobo wrote:
>>
>>> On Mon, 28 Jan 2013 15:16:14 -0800
>>> Doug Hardie wrote:
>>>
I have a relatively old machine that I am trying to boot 9.1 on.
On 1/29/2013 10:25 PM, d...@safeport.com wrote:
What is the system you are using? What external devices does it have
built-in support for? In the absence of any data - how about trying an
external hard drive?
Why not remove the hard drive, use another system to put FreeBSD on the
drive, and put
Hi all,
Could you guide me where I can find all the supported PHY driver source
code details ?
I want to know what are the PHY drivers supported within Freebsd 9.1
Release.
Please help me on this.
Regards
Hrisikesh
___
freebsd-questions@freebsd.org mail
30.01.2013 1:01, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
29.01.2013 18:57, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
The Handbook chapter on gmirror talks about the problems with GPT
and GEOM metadata. In short: right now, they conflict. It's
possible to mirro
On 01/30/2013 12:13 PM, Hrisikesh sahu wrote:
Hi all,
Could you guide me where I can find all the supported PHY driver source
code details ?
I want to know what are the PHY drivers supported within Freebsd 9.1
Release.
Please help me on this.
Regards
Hrisikesh
Hi
My guess: /usr/src/sys/dev/mi
Doug Hardie wrote:
On 29 January 2013, at 07:18, Mario Lobo wrote:
On Mon, 28 Jan 2013 15:16:14 -0800
Doug Hardie wrote:
I have a relatively old machine that I am trying to boot 9.1 on. The
bios will not boot from USB stick. I am using an external CD drive.
It starts the boot process fine
Rasel Ahmed wrote:
Please help me what the applied host in website ?
Sent from my iPhone
You have to provide details of your problem before
some one can help you.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listi
On 01/28/13 21:43, Artem Kuchin wrote:
I am planning to use mirror configuration of two SATA 7200rpm 2TB disks.
I personally vote for gmirror in this case; I've used it a lot and found
it very good wrt to both performance and robustness.
You can spend the extra money you spare on the contro
Thanks a lot for quick reply.
There is no file within /usr/src folder.
Could you please tell me how to get those source files for freebsd 9.1
release?
On Wed, Jan 30, 2013 at 6:31 PM, Bas Smeelen wrote:
> On 01/30/2013 12:13 PM, Hrisikesh sahu wrote:
>
>> Hi all,
>> Could you guide me where
On Wed, 30 Jan 2013, Artem Kuchin wrote:
30.01.2013 1:01, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
29.01.2013 18:57, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
The Handbook chapter on gmirror talks about the problems with GPT and
GEOM metadata. In short: right
30.01.2013 18:06, Warren Block:
On Wed, 30 Jan 2013, Artem Kuchin wrote:
30.01.2013 1:01, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
29.01.2013 18:57, Warren Block:
On Tue, 29 Jan 2013, Artem Kuchin wrote:
The Handbook chapter on gmirror talks about the problems with GPT
an
On 01/30/2013 02:43 PM, Hrisikesh sahu wrote:
Thanks a lot for quick reply.
There is no file within /usr/src folder.
Could you please tell me how to get those source files for freebsd 9.1
release?
You didn't install the sources when installing FreeBSD?
For 9.1-RELEASE i386 you can get the sou
On Jan 30, 2013, at 8:10 AM, Andrea Venturoli wrote:
> You can spend the extra money you spare on the controller buying good disks;
> as someone else pointed out don't get "desktop-class" ones, but "24x7" ones.
Server Class drives buy you some improvement, but my recent experience with
Seagate
There seems to be one more advantage to gmirror
If i understood correctly
gmirror label -v -b split -s 2048 data da0 da1 da2
will create a tripple mirror raid 1, that is
triple redundancy, which is hardly available on any hardware raid.
Am i correct here?
Also, does anyone know how to choose s
On Wed, 30 Jan 2013, Artem Kuchin wrote:
30.01.2013 18:06, Warren Block:
GPT partitions should work, just limit it to one mirrored partition per
drive.
Please, clarify what you mean here.
If only one GPT partition on a drive is mirrored with another GPT partition
on another drive, head c
On Jan 30, 2013, at 10:22 AM, Warren Block wrote:
> If you want to use the same drive for booting, it's possible. Create all
> three partitions on both drives manually. Then mirror the freebsd-ufs
> partition only. The contents of the freebsd-boot partition don't change
> often, and swap doe
30.01.2013 19:28, Paul Kraus:
On Jan 30, 2013, at 10:22 AM, Warren Block wrote:
If you want to use the same drive for booting, it's possible. Create all three
partitions on both drives manually. Then mirror the freebsd-ufs partition
only. The contents of the freebsd-boot partition don't c
On Wed, 30 Jan 2013, Artem Kuchin wrote:
Also, not being able to boot if first disk has some error in boot
section or just strangly dead is not an option too. However, i was
just thinking, if i use gmirror then bios does not know anything about
it. I may set both harddisk as boot disk, but if
Hello,
I would like to know the process to have a new version of hardware product
listed in this page: http://bsssd.sourceforge.net/hardware.html#hardware
Our TPM is fully compliant with the current driver provided as a module with
latest FreeBSD 9.1.
Best Regards,
___
On 30 January 2013, at 05:16, Fbsd8 wrote:
> Doug Hardie wrote:
>> On 29 January 2013, at 07:18, Mario Lobo wrote:
>>> On Mon, 28 Jan 2013 15:16:14 -0800
>>> Doug Hardie wrote:
>>>
I have a relatively old machine that I am trying to boot 9.1 on. The
bios will not boot from USB stick.
On Wed, 30 Jan 2013, Doug Hardie wrote:
On 30 January 2013, at 05:16, Fbsd8 wrote:
Doug Hardie wrote:
On 29 January 2013, at 07:18, Mario Lobo wrote:
On Mon, 28 Jan 2013 15:16:14 -0800
Doug Hardie wrote:
I have a relatively old machine that I am trying to boot 9.1 on. The
bios will no
I used gpart to set up a new disk,
then went through a 9.1 install.
Everything seemed to go fine, but when time came to boot the new drive,
it wouldn't boot.
When doing the 9.1 install,
I selected the disk and had to assign the partitions to the various filesystems.
AFIK, I did not otherwise modi
Gary Aitken writes:
> I used gpart to set up a new disk,
> then went through a 9.1 install.
> Everything seemed to go fine, but when time came to boot the new drive,
> it wouldn't boot.
While the "it wouldn't boot" is catastrophically imprecise, I
had what sounds like a similar probl
On Wed, 30 Jan 2013, Gary Aitken wrote:
I used gpart to set up a new disk,
then went through a 9.1 install.
Everything seemed to go fine, but when time came to boot the new drive,
it wouldn't boot.
What did it say?
When doing the 9.1 install,
I selected the disk and had to assign the partiti
It were > 20 directories/files with a wrong owner.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
On 01/30/13 15:02, Robert Huff wrote:
>
> Gary Aitken writes:
>
>> I used gpart to set up a new disk,
>> then went through a 9.1 install.
>> Everything seemed to go fine, but when time came to boot the new drive,
>> it wouldn't boot.
>
> While the "it wouldn't boot" is catastrophically
On 01/30/13 17:20, Warren Block wrote:
> On Wed, 30 Jan 2013, Gary Aitken wrote:
>> clean up (delete) the original partitions
>> gpart destroy ada3
>
> These two steps can be replaced with
> gpart destroy -F ada3
I prefer doing it piecemeal to see what's happening when along the way.
>> gp
When setting em interface for 9K MTU under 8.3-Release, it receives 9K frame
UDP
datagram but transmits 1500 UDP (fragmentation on 1500 MTU).
Besides set Jumbo MTU on the interface, is anything else need to be set for
transmitting jumbo frame out?
-Jin
_
29 matches
Mail list logo