backing up cvs files

issue, can anyone confirm this? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Palm Zire syncing woes

Ok, after about an hour of Googling and following several sets of directions, I've not yet been able to sync my Palm Zire. Does anyone have any pointers or suggestions? Realivent information: Using 5.2.1-RELEASE ucom and uvisor compiled into kernel /etc/usbd.conf ..snip.. device Palm Zire

network routing, strange issue

is machine a can not ping or ssh to machine b, from machine a's point of view it's as if machine b doesn't exist, yet machine c has no difficulties interacting with machine b. I hope the above made sense. Any help appreciated. Thanks. Dave. ___ [EMAIL

postfix port nullclient

. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

two nics, one dhcp server

, singley they work fine. Cabling is working, and i'm out of ideas as to what to try. Is this configuration possible? Any help appreciated. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

backpack external rom

Hello, Does anyone have a backpack external cd-rom working under 5.2.1? It has three possible methods of operation, parallel, USB, and PCMCIA, in this case only parallel is applicable. I need to burn using this burner, but have not been able to make it work. Any help appreciated. Thanks. Dave

vinum primary master drive inconsistencies

appreciated. Dave. PS, I love vinum! the secondary ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

apache2 startup flags

Hello, I just upgraded apache and now it starts via rc.conf. I want to use: apache_enable=YES apache2ssl_enable=YES but am unsure about the other options: apache2_limits, apache2_flags, and apache2limits_args what should these be set to? Thanks. Dave

pflogsumm and postfix2 logs

Hello, I've got pflogsumm running to analyze and summarize postfix logs. In the report it is reporting zero for all activities, even though i've sent mail during the period of the check. Any ideas? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list

ipfilter allowing samba

, not the net. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

apache2 port

? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: apache2 port

. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

limiting where a user can log in from

with login.access or login.conf, but am unsure as to what? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

using apm to power a system down, 5.x

power downs when a shutdown -h or halt -p is issued. This is not working. I get the press any key to reboot but the system never powers down. Any ideas? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

options tcp_drop_synfin and virtual hosts

appreciated. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

DHCP: keep a lease forever?

I got a simple problem. My local IP addresses keep changing (didn't have this problem before until a firmware update), and I don't want them to. I got these spammy winboxes that greedily race for to steal my FreeBSD's lease. I'm using a simple 4-port linksys router here. It's configuration is

Re: using apm to power a system down, 5.x

Hello, Yes, there is a kernel apm module. I've also disabled acpi via device.hints, and enabled apm via that file as well. I've also put apm_enable in rc.conf. Is this overkill? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org

pflogsumm not summarizing log messages

to the issue. Any help appreciated. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Disabling DHCP

I want to turn DHCP on my router off. How can I use FreeBSD to get an IP addresss from it? When the system boots, it runs dhclient, which hangs for awhile before getting anything. What is the better way? ___ [EMAIL PROTECTED] mailing list

Re: cvsup coredump

There were some security problems with cvs awhile ago. I think it is unlikely that cvsup3.jpg.FreeBSD.org though would be suffering. Have you tried another cvsup server? Are you running the latest updates of FreeBSD? On Sun, 20 Jun 2004, John Lee wrote: Why does it always coredump?

booteasy output on serial console

method of making selections? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

segfaults during make world

do the same thing a little later. Any help appreciated. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

tripwire on 5.2.1

Hello, A while back i tried installing the tripwire port, but it reported as broken. I was wondering is anyone using this on 5.2.1? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

amavisd-new postfix issue

postfix/master[68635]: warning: /usr/local/libexec/postfix/smtpd: bad command startup -- throttling Any help appreciated. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Re: amavisd-new postfix issue

, it didn't matter because i got the same behavior from smtpd on postfix. Keep the ideas coming. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: amavisd-new postfix issue

content_filter in main.cf, and tried to send a test message. Well, it didn't work and after going through the resulting log file which vividly detailed the smtp transaction i got the same error from smtpd as in my original post, no additional information. Any other suggestions welcome. Thanks. Dave

Re: amavisd-new postfix issue

, this problem is extremely elusive. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: amavisd-new postfix issue

message i'm getting in my maillog. If anyone has any suggestions i've posted my configs for postfix and amavisd at: http://www.davemehler.com/postfix Any suggestions welcome. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org

Re: amavisd-new postfix issue

want to do this, but i'm not seeing the problem and as i said -v isn't really helping. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

solved amavisd-new and postfix issue

over the past couple of days. As for the original dictionary problem i don't have a clue, a fluke, an extra space? Or just my luck? Anyway, my thanks to everyone. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo

postfix postmap, when to use

it. In addition hash and other types i'm similar confused. Has this changed from 2.0 to 2.1? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

sasl server file not found

: pwcheck_method: saslauthd during startup i do see the message Starting saslauthd without any errors, any ideas? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

postfix, MailScanner, and SpamAssassin on fbsd 5.1

directories and to enable hash_queue_names and hash_depth in postfix. I do this and it does not stop the problem, i eventually would also like to add a virus checker, which one is recommended for use on fbsd 5.1? Any help appreciated. Thanks. Dave

converting ext3 to ffs

Hello, Does anyone know if it's possible to convert an ext3 partition to an ffs partition? And if so, is it possible to do it without data loss? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

comp.unix.bsd.freebsd.misc not showing any messages?

received. dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Filesys::Df perl module in 5.1

Hello, I'm trying to get the perl Filesys::Df module to build under 5.1, so far it fails during the testing phase and therefor will not make. This is right off of cpan, does anyone have a fix for this? Thanks. Dave. ___ [EMAIL PROTECTED] mailing

upgrading 5.1 to 5.2

the compiles on it, then transfer the files to the other box. I need to do this with a minimum of downtime as both boxes are critical. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

submitting a new man page

correct. Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Adding Packages and Ports

on it at all. Not 100% sure on that. HTH dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

How to? Submit a new or ammended man page

it's of some use and is vaguely correct. Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

atacontrol software raid

Hello, Trying to help a friend set up a system for raid. He's got two 4 gb drives he'd like to mirror. And we were thinking atacontrol, googled for a site on this, and didn't find anything. Any help appreciated. Thanks. Dave. ___ [EMAIL PROTECTED

Re: cdrom

FreeBSD may not see either, eg the CD is plugged into it's own controller card or a sound card (some work, some don't) Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http

Re: shutdown -p now causes auto power up at midnight

. The default time is 00:00:00 so if you've enabled it it will switch on at midnight :-) Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

ports vulnerability check

Hello, I started seeing this in late 5.1 and now in 5.2 as well. When i am compiling a port the first message is get is Vulnerability check disabled What is this? Should i be worried about it? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http

USB hard disk

or recommendations i'd appreciate it. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: SoundBlaster 16 PnP ISA Card on 5.1

Hello, In my /boot/loader.conf file i have: snd_sb16_load=YES and that was all i needed to do. Aside from that you might need a volume control prog. HTH Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

vinum on 5.2

not work at all after a few more modifications. I was wondering if there was any truth to this particularly how it relates to my procedure? Also, if it is so is there another package i could employ? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http

FreeBSD scanning slides

of and is not suitable for transparencies. Price *is* an object, so I'm hoping some of you people may be able to suggest a suitable FreeBSD/Sane compatible scanner for me which is low in cost. Note that I'm in the UK and am prepared to search ebay.co.uk etc for second hand units. Thanks Dave -- Any

postfix MTA questions

bounces the message both the original message and any domain bounces are perged without me seeing them. Finally, I've got a domain on a dynamic IP, i'd like to relay through my isp's smtp server as a smarthost, if i do this will my outgoing domain name be altered? Thanks. Dave

Re: IP phone server ?

reviewed there, 4 of them run on Linux. HTH Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

vinum unable to find root

welcome. Thanks. Dave. original disklabel # /dev/ad0s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 245760 10485764.2BSD 2048 16384 15368 b: 10485760 swap c: 781561620unused0 0 # raw part, don't edit d

Dell 2650 config for FreeBSD 4.9

Internal CD ROM Power Supplies Redundant Power Supply, without Y-cord Rack Rails VersaRails for Non-Dell 4-Post Rack Apprecite comments; Dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send

php4 port and ssl

, how do i indicate to the port where this is? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: List of compatible hardware

. that will serve my question ? Thank You , very much ! For scanners you need to install SANE. See http://www.sane-project.org/ Dave -- Any speling misteaks are the reult of a bad insallation of mod_spelink. ___ [EMAIL PROTECTED] mailing list http

portupgrade questions

, for the make args do i have to list dependencies of ports in that list or just the primary packages i want? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

portupgrade upgrading ports i don't want

which of the -rR switches is responsible for this? Also can i have a make arg like: packagename = 'install clean' That does not appear to be working. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: portupgrade upgrading ports i don't want

trying to install mysql. Please keep the suggestions coming. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

pkgtools.conf entry for samba

Hello, Does anyone have a pkgtools.conf entry for samba? I'm trying to update mine, but i can not figure out how to make it stop giving me the dialog box/or accepting my options, i've used batch and various combinations of the options. Thanks. Dave

Re: 5.2 Help

when building the boot disk(s). You use the tools supplied to write the raw image file (including the formatting) to the disk. See the handbook, section 2.2.7 http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-pre.html Dave -- Any speling misteaks are the reult of a bad

samba in a jail

Hello, Does anyone have a howto for getting the samba port configured for jailed use? I've tried an install with the jail patch, but it blew out stating that a jail had to be configured. Has anyone got samba working under this configuration? Thanks. Dave

secure cvs server, urgent

, consult above messages if any. There are none and nothing in the logs. When i tried to use the :ext method i got the error: login can only be used with the pserver method. If anyone has secure cvs services going behind a firewall to users on the net please let me know. Thanks. Dave

using strace gives proc error

debugging, can anyone clue me in to what strace wants? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

jail setup

at: and understood that sendmail and perl and some other items would be available. When i do a pkg_info from within the jail there aren't any packages. did i miss a step? Is there something i should have installed to make this go easier? Thanks. Dave. ___ [EMAIL

changing directory permissions recursively

this? Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

APC 1000/1500va UPS

Hello, Does anyone have either an APC 1000va or an APC 1500va UPS? I was wondering how well it worked with FreeBSD 4.x/5.x? This would be for a single system, as a master, but would be responsible for two other machines. Any info or setup information appreciated. Thanks. Dave

fetchmail and spam assassin

which is running on the same box and which has spamassassin and some other anti-uce filters in place. Also on the subject of spamassassin a lot of junk is still getting through, is there a FreeBSD specific spam assassin configuration tutorial or howto? Thanks. Dave

have i been hacked?

, and i had nearly 150 processes on the box, 9 running. When i got the daily run output i noticed the setuid files have changed. Wondering if this box got hacked and if so where to look to confirm this? And if so, what to do? Thanks. Dave. Checking setuid files and devices: ls: Terminated

Re: have i been hacked?

Hi, Sorry i should have specified, that's a 4.9 box, with the latest patches and ports. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: have i been hacked?

services. Keep the suggestions coming. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

pure-ftpd

and group the server should run as. I've got a diff of changes i made to the pure-ftpd.conf file which i copied from pure-ftpd.conf.sample and would appreciate any suggestions. Thanks. Dave. My diff command was: diff pure-ftpd.conf pure-ftpd.conf.sample pureftpd which is here 65c65 DisplayDotFiles

ftp server

with ipfilter/ipnat. Using the base ftp server on a test box i can connect but i keep getting an error, can not build data connection, this is from a box external to the firewall. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org

chkrootkit reports infected date

Hello, I just ran chkrootkit -n -q on a 5.2.1 box, and it showed date as being infected, but nothing else, no worms, and it didn't say with what. Given my last experience i would appreciate any suggestions as to how to identify this anomaly and stop it. Thanks. Dave

ipfilter allowing cvs

, all traffic external is allowed in, it's the internal interface that governs what can get to me. If anyone is running a cvs server behind a firewall, note, i'm using nat, please let me know your setup. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http

postfix on fbsd 5

you send me your /etc/mail, /usr/local/etc/postfix, and your rc.conf or some pointers? Thanks. Dave. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

mounting linux ext3 partition

appreciated. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

file size limit

everything. Thanks. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

sysctl variable descriptions

Hello, Running 5.1-RELEASE, and was wondering is there a list of each sysctl variable with a coresponding description? I know about sysctl -a and i pipe that to a file, get something like 700 hits on it. Thanks. Dave. ___ [EMAIL PROTECTED

customizing the apache2 port

. Dave. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Hell of a time

(disklabel editor) choose A autodefaults for all. If that works ok then you'll know it is the 1 Gig size that is the problem dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

Re: Properly installing the XFree86 4.3.0 port on Freebsd 5

is possibly not necessary, or another way to do it is probably possible. cheers, dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

USB Wireless Keyboard and Mouse

, addr 2, iclass 3/1 If I'm reading this currectly it does recongize the devices but they don't seem to be working. Any help would be much appreciated. Dave ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: error on build of jdk13 build

loaded the linux module with kldload and then put a line in /etc/rc.conf to load the linux module on bootup? check to make sure it got loaded with kldstat here is a line i have in rc.conf: linux_enable=YES dave ___ [EMAIL PROTECTED] mailing list http

Lock Order Reversal (5.1 CUR kern)

I get THIS *every* time I exit X-windows: lock order reversal 1st 0xc45f4b90 vm object (vm object) @ /usr/src/sys/vm/vm_object.c:432 2nd 0xc082f110 system map (system map) @ /usr/src/sys/vm/vm_kern.c:325 Stack backtrace: backtrace(c057b35f,c082f110,c058cfb6,c058cfb6,c058ce51) at

Help needed with DNS reolving

FreeBSD to use specific DNS addresses. Please help. Dave -- Sig abducted by aliens To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

Re: Help needed with DNS reolving

* and want it to sing and dance immediately. I keep forgetting there's a learning curve ;-) Now I can get back to setting up MPlayer on the new box g Dave -- Sig abducted by aliens To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

Re: X w/ on board video....

presume the svga driver would also. I cant get the onboard ethernet to work. The onboard audio seems to work fine under both KDE3 and Gnome2. dave To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

Re: X w/ on board video....

version of X and freebsd? dave To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

Re: Freebsd - restarting itself?!

thing at a time, and waiting. If you change too many things at once then you won't know which one made the diff. I'd start with a root passwd change and make sure I have a good UPS. good luck dave To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body

BackupPC

media such as DVD. Thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Will my friend's computer work with FreeBSD?

at their site, there *might* have been support for Mustek, but I wasn't too hopeful for the scanners I have in the pile. I can't remember, but I think one was a Mustek. YMMV. I can confirm the mustec1200CP (aka Bearpaw1200) as working with sane under FreeBSD. Dave -- Any speling misteaks

Re: Software mirgration from Windows for my friend

equivilents as well as avidemux2 which can do the DVD to AVI from a pointy/clicky window. Dave -- Dave Please address email replies to: [our favourite OS] AT dgmm DOT net For offlist replies please put FreeBSD in the subject line. ___ freebsd-questions

Re: vesa,/i810, Dell gx270 and Intel 82865G Graphics

cost me some hair ;-) HTH Dave -- Dave Please address email replies to: [our favourite OS] AT dgmm DOT net For offlist replies please put FreeBSD in the subject line. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman

wget port

. Thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

perl upgrade broke 5.3 system

are installed. On another question when i install a port if it installs dependencies and those are only needed by that port, when i uninstall the port i'd like to updte and remove those dependencies as well, is this doable? Some urgency! Thanks. Dave

error from logcheck

Hello, I've got logcheck running on a 5.3 box. Recently i began getting this error message in an email. I was wondering what it meant? postdrop: warning: uid=0: File too large send-mail: fatal: root(0): Message file too big Thanks. Dave

apache2, suexec, and portupgrade

WITHOUT_EXPERIMENTAL_MODULES=yes WITHOUT_PROXY_MODULES=yes WITHOUT_THREADS_MODULES=yes Any suggestions welcome. As a tempoary fix i've commented out the suexec module load line. Thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman

ssh, sftp, and public key authentication

in no questions asked. Help needed! Thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: ssh, sftp, and public key authentication

machines are involved, machine1 to machine2 lets me in no questions, machine3 to machine1 also works this one uses password authentication, but then going from machine1 to machine2 does not. thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http

Re: ssh, sftp, and public key authentication

, even though i select public key authentication, so i ssh to machine1, on my network, then from there try to ssh to machine3. This does not work, i'm repeatedly prompted for a passphrase which i don't have. Hope that clarifies things. Thanks. Dave

troubles with a usb2 external hard disk

only doing 1.00 mb a sec, that sounds like usb1 to me, this controller and device are both 2.0 capable. Secondly, fdisk, newfs, bsdlabel, mount, the procedure for adding disks in the handbook, all return read input/output errors. Any help appreciated. Thanks. Dave. dmesg: Tue Mar 1 22:47:55 EST 2005

  1   2   3   4   5   6   7   8   9   10   >