1024x768 Resolution in console?

2004-04-23 Thread Eric Crist
Hello list, I've posted this question before, and I've had some good tips on where to look for the right answer. I started with man pages for syscons, vidcontrol, and others. I can't figure it out. I've been toying with this for quite a while, but I'm failing. Apparently, there's a way to

RE: Connecting to a headless system

2004-05-11 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bruce Hunter Sent: Tuesday, May 11, 2004 6:01 PM To: [EMAIL PROTECTED] Subject: Connecting to a headless system I have installed FreeBSD 5.2.1 using the headless install method. My problem is this. I can't

RE: Help: Speeding up Boot Process

2004-05-11 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Jayson Alvarez Sent: Tuesday, May 11, 2004 10:02 PM To: [EMAIL PROTECTED] Subject: Help: Speeding up Boot Process Sir, [SNIP] And one last thing, I know this might sound ignorant on my part but...

RE: Help: Speeding up Boot Process

2004-05-11 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Huff Sent: Tuesday, May 11, 2004 10:14 PM To: [EMAIL PROTECTED] Subject: RE: Help: Speeding up Boot Process Eric Crist writes: You can send a program into the background by trailing the command

confusing printing error

2004-05-13 Thread Eric Crist
Hey list, I re-ran the apsfilter setup routine, and now my printer seems to work fine, except I can only print with: # lpr -Paps1 file I can't print from Kmail, or anything else, as I get the following error: A print error occurred. Error message received from system: /usr/local/bin/lpr -P

my print server

2004-05-10 Thread Eric Crist
Hey all, I've been googling and searching the list archive's for over an hour now, and I can't find my post of a working printcap for my ZOT print server. I know I posted it once I got it working. Can someone else see if they have luck locating it? TIA Eric Crist

RE: Hard lockups

2004-05-09 Thread Eric Crist
Have you tried installing that network card in a different PCI slot? Sometimes that does the trick. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of stan Sent: Sunday, May 09, 2004

RE: Unable to unregister from this group

2004-05-16 Thread Eric Crist
I'm guessing you're trying to unregister the wrong email address. Many people have more than one, and pay little attention to which account a particular email comes in on. Check the headers and see where it's being delivered to. Then unsubscribe that email in particular. HTH Eric F Crist

Re: cron can't find root or operator

2004-05-20 Thread Eric Crist
On Thursday 20 May 2004 09:14, carvin5string wrote: I have a new server set up and running and am getting a slew of messages from cron, like this - Subject: Cron [EMAIL PROTECTED] root /usr/libexec/atrun Body: root: not found and Cron [EMAIL PROTECTED] operator /usr/libexec/save-entropy

gpg-agent problems...

2004-05-20 Thread Eric Crist
Hello list, First off, please respond to me in a CC, as I'm not subscribed to this list. Secondly, I've set this up a few times now, and it's always just worked, but this time I've got errors. I'm trying to set up the pgp/MIME plugin. Everything is working fine, except I never get the

Re: gpg-agent problems...

2004-05-20 Thread Eric Crist
On Thursday 20 May 2004 14:11, you wrote: On Thursday 20 May 2004 19:23, Eric Crist wrote: Hello list, First off, please respond to me in a CC, as I'm not subscribed to this list. Secondly, I've set this up a few times now, and it's always just worked, but this time I've got errors

Re: gpg-agent problems...

2004-05-20 Thread Eric Crist
One of you said something that go me thinking. I checked the value of GPG_AGENT_INFO, and noticed that it referenced an old instance of gpg-agent. I fixed this, now it works. Thanks! -- Aleph-null bottles of beer on the wall, Aleph-null bottles of beer, You take one down, and pass

RE: Proper way to start a program at log-on

2004-05-23 Thread Eric Crist
Make a shell script like the ones in /usr/local/etc/rc.d to start and stop the process. The script MUST be named whatever.sh and must be executable. It must accept start and stop as parameters. This is the general solution. There is probably a doc reference for it but I havent looked. mjt On

Re: Proper way to start a program at log-on

2004-05-24 Thread Eric Crist
On Monday 24 May 2004 19:23, you wrote: ** Reply Separator ** Monday, May 24, 2004 8:18:06 PM Sorry Eric, but I am not the well versed in this OS yet. I was able to create a simple script that works. The program is started at log-on and stopped at shutdown without incident.

RE: ethernet card not coming up on reboot

2004-05-26 Thread Eric Crist
I have also noticed this issue, but if I have only once instance of the entry in rc.conf, everything works fine. Why not statically define the IP, though? That would be the best situation, IMHO. HTH Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original

RE: ethernet card not coming up on reboot

2004-05-26 Thread Eric Crist
] [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 26, 2004 12:45 PM To: Luke Kearney Cc: Eric Crist; [EMAIL PROTECTED] Subject: Re: ethernet card not coming up on reboot Subject: Re: ethernet card not coming up on reboot On Tue, 25 May 2004 20:00:12 -1000 [EMAIL PROTECTED] spake thus: Aloha Eric

RE: DHCP is down..

2004-05-26 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Kline Sent: Wednesday, May 26, 2004 8:09 PM To: Gary Kline Cc: FreeBSD Mailing List Subject: Re: DHCP is down.. On Wed, May 26, 2004 at 01:51:46PM -0700, Gary Kline wrote: well, severe

FW: DHCP is down..

2004-05-26 Thread Eric Crist
-Original Message- From: Thomas Farrell [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 26, 2004 9:34 PM To: Eric Crist Subject: Re: DHCP is down.. Do you have this in the begining of dhcpd.conf ddns-update-style none; ? If you don't put it in at the top of config Please read

RE: routing question

2004-06-05 Thread Eric Crist
You need to kill all the running dhclient processes, then try again. Usually, this can be done with: #killall -9 dhclient HTH Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of

Re: Anti-Spam app for sendmail

2004-06-08 Thread Eric Crist
On Tuesday 08 June 2004 10:35, Chris wrote: Any comments on a good anti-spam app that works with sendmail for a mail server? Yeah, try SpamAssassin. I've been using it since January, and have almost zero SPAM delivered to my inbox now. I think in all that time it has only had one false

DNS/BIND Question

2004-06-12 Thread Eric Crist
Hey all, I was wondering how to make one subdomain resolve to multiple IP addresses? I have www.mydomain.com which has only had 1 IP address for a long time. Now, I want to create a second server with a mirror of that web server. I'd like lookups of www.mydomain.com to resolve to two

upgrading the perl installation problems.

2004-06-12 Thread Eric Crist
Hello list, I'm trying to install mimedefang from ports, but I get the error: === mimedefang-2.43_1 Port requires perl 5.6.1 or later. Install lang/perl5 or lang/perl5.8 then try again. I cd to the correct directory, type make install clean, get the 'all ok' from installation telling me it's

Re: upgrading the perl installation problems.

2004-06-12 Thread Eric Crist
On Saturday 12 June 2004 02:25, you wrote: You're missing one of the last warnings during the make of perl5.x from the ports tree.. use.perl. Usage: /usr/local/bin/use.perl port - /usr/bin/perl is the perl5 port /usr/local/bin/use.perl system - /usr/bin/perl is the system perl

RE: NAT vs Public IP Range info needed, please

2004-06-12 Thread Eric Crist
-Original Message- Hello, I am looking to replace a proprietary DSL router/modem with the Sangoma S518 ADSL PCI Controller, thereby placing a FreeBSD (4.10-Stable) server running ipfw to handle access, firewall and nat duties. The ISP's DSL package includes 8 static ip

RE: about the installation

2004-06-13 Thread Eric Crist
Generally what happens on an install, if you select to install the freebsd boot loader, is that you'll get a menu upon boot that looks similar to: F1 ?? F2 Disk 1 Pressing F1 will boot Windows 2000 (or XP) and pressing F2 will show a menu such as: F1 FreeBSD F2 Disk 0 These menus will just

RE: apache2 port

2004-06-13 Thread Eric Crist
: Sunday, June 13, 2004 8:13 PM To: Eric Crist; [EMAIL PROTECTED] Subject: Re: apache2 port Hello, Thanks for your reply. I checked the DirectoryIndex parameter. It has index.html in it and there is a file index.html in the web area. Permissions on it do allow it to be read. As i said i

Upgrading openssh

2004-06-16 Thread Eric Crist
After figuring out perl (with the help of Matthew, I was wondering what the proper way to install/upgrade openssh. I assume it's to install from ports, and somehow disable the installed, system version. What's the proper method? -- Eric F Crist Keep your pecker hard and your powder dry, and

Re: Upgrading openssh

2004-06-17 Thread Eric Crist
On Thursday 17 June 2004 10:41, Nagilum wrote: Hi Eric, The base version of openssh is updated frequently (especially if any vulnerabilities are discovered), so why bother with the port? Kind regards, Alex. Eric Crist wrote: After figuring out perl (with the help of Matthew, I

Re: startkde

2004-06-17 Thread Eric Crist
On Thursday 17 June 2004 23:36, Brett Wiggins wrote: hello, I am having some problems with startkde. I have looked through the mailing list archive and the handbook and am still stuck. I set up my machine to run KDE as per the handbook chapter on the X window system. When I type startx

Re: startkde

2004-06-18 Thread Eric Crist
On Friday 18 June 2004 00:58, Brett Wiggins wrote: hello Eric, After installed the X window system and KDE I created the file ~/.xinitrc which contains; exec startkde after I created the file I could use startx to run KDE. I then setup KDM by editing the

Re: Which PGP version to use question

2004-06-20 Thread Eric Crist
On Sunday 20 June 2004 06:36, Gerard Seibert wrote: I am using PGP version 8.03 http://www.pgp.com/ on my WinXP machines. My data is uploaded to a keyserver. PGP Corporation does not, as far as I can determine, market a FreeBSD or Linux version of this software. My question would be what

Re: How to start httpd and mysql automatic with FreeBSD start?

2004-06-20 Thread Eric Crist
On Sunday 20 June 2004 05:21, Alex wrote: Hello to all, Plese say me how to correctly start httpd and mysqld with system sturtup... Where i need register it? (maybe in rc.conf or inet.d ?) And what i need to write in that file? Thanks! You didn't mention what version of FreeBSD you're

RE: Spamassassin

2004-06-21 Thread Eric Crist
It is possible the default install on RedHat has a lower 'score' necessary for it to be flagged as spam. You can set this in the configuration file. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

SASL and Sendmail

2004-06-29 Thread Eric Crist
I've installed SASL(Cyrus) according to the instructions found in the handbook. I've removed all the proper entries in the relay-domains file, but I get the following error message now when I try to send mail: Your message did not reach some or all of the intended recipients. Subject:

SASL and Sendmail

2004-06-29 Thread Eric Crist
I've installed SASL(Cyrus) according to the instructions found in the handbook. I've removed all the proper entries in the relay-domains file, but I get the following error message now when I try to send mail: Your message did not reach some or all of the intended recipients. Subject:

SASL and Sendmail

2004-06-29 Thread Eric Crist
I've installed SASL(Cyrus) according to the instructions found in the handbook. I've removed all the proper entries in the relay-domains file, but I get the following error message now when I try to send mail: Your message did not reach some or all of the intended recipients. Subject:

Re: Mail list problems.

2004-06-29 Thread Eric Crist
On Tuesday 29 June 2004 07:14, Bill Moran wrote: Yes, but front-door.secure-computing.net doesn't resolve to anything. Well, I fixed it. We'll see if this gets to the list OK. -- Eric F Crist Keep your pecker hard and your powder dry, and the world WILL turn.

Cyrus SASL

2004-06-29 Thread Eric Crist
Hey all, My other message doesn't seem to have gone through, so I'll ask again. I followed the instruction to the letter from the documentation on the freebsd site for smtp auth via sendmail and cyrus-sasl. In order to get sendmail running, I had to delete a bunch of nearly blank lines from

SASL and Sendmail

2004-06-29 Thread Eric Crist
I've installed SASL(Cyrus) according to the instructions found in the handbook. I've removed all the proper entries in the relay-domains file, but I get the following error message now when I try to send mail: Your message did not reach some or all of the intended recipients. Subject:

Sorry!

2004-06-29 Thread Eric Crist
Hey all! Sorry for the multiple posts. I was trying to get my mail server working again, and apparently I did. I just didn't happen to get the mail queue cleared before I did so. Sorry again. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588

SASL and Sendmail

2004-06-29 Thread Eric Crist
I've installed SASL(Cyrus) according to the instructions found in the handbook. I've removed all the proper entries in the relay-domains file, but I get the following error message now when I try to send mail: Your message did not reach some or all of the intended recipients. Subject:

RE: SASL and Sendmail

2004-06-29 Thread Eric Crist
To: Eric Crist Subject: RE: SASL and Sendmail Hi On Tue, 29 Jun 2004, Eric Crist wrote: Here is output at loglevel 20 on a denied mail: This is your problem: Jun 29 19:09:50 grog sm-mta[4868]: AUTH: available mech=LOGIN PLAIN ANONYMOUS, allowed mech=EXTERNAL GSSAPI KERBEROS_V4

OPIEKEY and ssh

2004-06-29 Thread Eric Crist
Hey all, I can't, for the life of me, remember what I did to get opie to work when you su to root. I have it working on one of three servers, but can't get it to work on the other two. Any advice would be great! Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588

RE: SASL and Sendmail

2004-06-30 Thread Eric Crist
appreciate it. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: Chris Sechiatano [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 30, 2004 11:20 AM To: Eric Crist Subject: Re: SASL and Sendmail Here's what I added to my .mc file to get

RE: SASL and Sendmail

2004-06-30 Thread Eric Crist
: Wednesday, June 30, 2004 5:16 PM To: Eric Crist Subject: Re: SASL and Sendmail the authinfo file is for making sendmail into a auth client. you put your username and password info in that file to authenticate you against a smtp server. this is only for relaying mail through another smtp server

Milter and ClamAV

2004-06-30 Thread Eric Crist
Hey all, Sorry for so many posts over the last few days, but I get on the configuration binges, and it all goes downhill from there. ;) I've just installed ClamAV with Milter support. I was wondering how I would go about adding a signature at the bottom of outgoing mail to indicate that it has

RE: OT: Cable management

2004-06-30 Thread Eric Crist
Considering this is what I do for a living, the best, and cheapest trick, provided you own a multimeter (or a 9V battery and a flashlight bulb) is to short out one end (for the multimeter part) and set the multimeter for diode/continuity test. If you just have the 9V and bulb, apply the lightbulb

[WAAAY OT]

2004-07-01 Thread Eric Crist
Anyone know what the ACTUAL definition/word for I in Ohm's Law is? I know: E= Electromotive Force R= Resistance I= ? (I know it's amperage, but what does I mean?) Thanks. Sorry for being so far OT. Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588

RE: [WAAAY OT]

2004-07-01 Thread Eric Crist
) 998-3588 -Original Message- From: Baron Fujimoto [mailto:[EMAIL PROTECTED] Sent: Thursday, July 01, 2004 7:45 PM To: Eric Crist Subject: RE: [WAAAY OT] ahh, I didn't realize that's what you were asking. I've seen at least one reference that speculates that I was for Intensity

RE: [WAAAY OT]

2004-07-01 Thread Eric Crist
I am afraid it doesn't stand for impedance. It is the symbol used for current throughout electromagnetic theory, and I don't think it does stand for an English word. Your are right it is off topic! Actually, it does stand for Intensity, according to the 1812 papers published by Ohm

RE: [Fwd: /etc/hosts and /etc/host.conf confusion]

2004-07-02 Thread Eric Crist
-Original Message- On Behalf Of David Fuchs bump. At the very least perhaps someone could point me to some docs that give a good explanation? Hello, I'm having some difficulties understanding the semantics behind the resolver in FreeBSD, and how /etc/host.conf, /etc/hosts,

Wireless Networking in FreeBSD 5.2.1

2004-07-03 Thread Eric Crist
Hey all, I'm trying to get wifi working in freebsd 5.2.1. This card WAS working in 4.9 and 4.10, but I get an error similar to: Error: busy bit won't clean on wi0 Or something to that effect. If I boot the system without the card, I can see it and make lights blink, but it never associates to

Time issues between Winblows and FreeBSD on same system.

2004-07-03 Thread Eric Crist
Hey all, I've got a laptop with FreeBSD 5.2.1 and Windows XP. Using network time update on freebsd, I can keep the time on my laptop accurate. However, windows falls behind by about half an hour when I do so. If I set Windows to use 'internet time', using the same time server (time.nist.gov),

RE: the Donations Liaison Officer

2004-07-04 Thread Eric Crist
If there isn't one, I offer my expertise. I've been running a Corp for three ears and have a little free time now. Eric F Crist Found on Conan O'Brian: Children's books written by celebrities; By Mel Gibson: Jesus Christ and the Terrible, Horrible, No Good, Very Bad Day. - Keep your

Auth.log and Cyrus SASL

2004-07-04 Thread Eric Crist
Hey all, The email from Mr. Gerhardt prompted me to take a look at auth.log, and I noticed a couple things that concerned me. I just set Cyrus-SASL up, and I see these entries in my auth.log file: Jun 28 18:31:48 grog saslauthd[187]: START: saslauthd 1.5.28 Jun 28 18:31:48 grog saslauthd[194]:

FW: Repost to me only...

2003-10-06 Thread Eric Crist
Eric F Crist AdTech Integrated Systems, Inc (952) 403-9000 -Original Message- From: Manuel Rabade (MiG) [mailto:[EMAIL PROTECTED] Sent: Sunday, October 05, 2003 9:03 PM To: Eric Crist Subject: Re: Repost to me only... On Sun, Oct 05, 2003 at 08:14:02PM -0500, Eric Crist wrote: Hey

BandwidthD syntax error?

2004-07-07 Thread Eric Crist
Hey all, I just installed bandwidthd, and I get the following error when I try to run it from it's home directory: Monitoring subnet 63.228.14.240 with netmask 255.255.255.248 grog# Opening dc0 Opening dc0 Opening dc0 Opening dc0 Syntax Error parse error on line 40 Syntax Error parse error on

RE: BandwidthD syntax error?

2004-07-07 Thread Eric Crist
. - Eric F Crist -Original Message- From: Michael Clark [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 07, 2004 8:31 AM To: 'Eric Crist'; [EMAIL PROTECTED] Subject: RE: BandwidthD syntax error? If you want to post your configuration file Ill take a look at it. Michael Clark Nemschoff

RE: Sendmail hand upon boot and restart

2004-07-07 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Bertrand Sent: Wednesday, July 07, 2004 8:32 AM To: Gary Kline Cc: FreeBSD Mailing List Subject: Re: Sendmail hand upon boot and restart After a year I'm finally upgrading DNS servers,

WPC11 ver 3 or bust...

2004-07-07 Thread Eric Crist
Hey all, I posted almost a week ago about not being able to use my 16-bit PCMCIA Linksys WPC-11 v3 wifi card. This card always worked well under 4.9, but I can't get it to work under 5.2.1. The card is recognized, and I can even assign IP addresses and such, but it never associates to my

RE: dns/sendmail/resolve problems...

2004-07-07 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Kline Sent: Wednesday, July 07, 2004 9:21 PM To: [EMAIL PROTECTED] Subject: dns/sendmail/resolve problems... On tao sendmail hangs forevr before it ever strts up. Anybody know why?

RE: WPC11 ver 3 or bust...

2004-07-08 Thread Eric Crist
-Original Message- From: Dirk-Willem van Gulik [mailto:[EMAIL PROTECTED] Sent: Thursday, July 08, 2004 2:15 AM To: Eric Crist Cc: 'FreeBSD Mailing List' Subject: Re: WPC11 ver 3 or bust... On Wed, 7 Jul 2004, Eric Crist wrote: wi0: wi_cmd: busy bit won't clear What firmware

RE: Network configuration

2004-07-08 Thread Eric Crist
packet destined for 156, 157, or 158 get passed back to xl1. Set the default gateway on your machines to .154. This should have you up and running. If this doesn't make sense to you, send me an email and I'll try to explain further. HTH Eric Crist

RE: WPC11 ver 3 or bust...

2004-07-08 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew L. Gould Sent: Wednesday, July 07, 2004 10:10 PM To: [EMAIL PROTECTED] Subject: Re: WPC11 ver 3 or bust... How are you configuring the wireless card? I'm using the same card on 5.2.1 Release

Rack-Mount Server cases

2004-07-09 Thread Eric Crist
Hey list, I'm just asking opinions here, but: What do you prefer for a 2U rack mount server case? I want to keep the cost down, but I want something that looks nice and is functional. I've got 5 servers I'm looking at replacing existing cases on to make them match, as well as to free up some

BSD Airtools?

2004-07-10 Thread Eric Crist
Hey all, I've looked everywhere, and I can't find the bsd-airtools port. Can anyone enlighten me? Thanks. -- Eric F Crist Keep your pecker hard and your powder dry, and the world WILL turn. ___ [EMAIL PROTECTED] mailing list

Re: NEWBIE: Logging into Cox Cable service

2004-07-11 Thread Eric Crist
On Sunday 11 July 2004 10:10, you wrote: I am running FreeBSD 4.10 and am trying to connect to my Cox ISP via a an Ethernet nic and cable modem. I have DHCP for the nic enabled in /etc/rc.conf and can obtain an IP address from my Windows 98 gateway, but when I connect the nic to the cable

Re: DNS server

2004-07-11 Thread Eric Crist
On Sunday 11 July 2004 12:35, Sean Dicks wrote: I am only using dns forwarding. I already have default values in /etc/resolv.conf from my ISP, do I have to add my 2 others and delete the ones from the ISP or just leave it as is. I registered the domain today when I whois rimouski-undernet.org

Re: DNS server

2004-07-11 Thread Eric Crist
On Sunday 11 July 2004 13:12, cpghost wrote: Just give it some time to propagate. % dig rimouski-undernet.org ; DiG 8.3 rimouski-undernet.org ;; res options: init recurs defnam dnsrch ;; res_nsend: Operation timed out Yep, not yet visible here... -cpghost. Something I didn't think

Re: Printer problems

2004-07-11 Thread Eric Crist
On Sunday 11 July 2004 22:58, Earl Larsen wrote: I tried to get my printer to work. But when I do lptest /dev/lpt0. I get no out put. I checked and have everything correct. So I am thinking that my printer is not compatible. I have a Compaq IJ700. I am unable to find if this printer is

Re: BandwidthD syntax error?

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 03:56, Irvine Short wrote: Mike Maltese wrote: There's a bug report on this on the project's SourceForge page. I Found it, thanks. installed 1.20b and it's running without issue. On which platform? 4.x or 5.x? Cheers, -- Irvine FreeBSD 4.10. -- Eric F Crist

Re: 802.11b with FreeBSD

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 11:55, Josh Ockert wrote: Does anyone have any suggestions on wireless cards to use with FreeBSD? I used to have a USR 2410 but I could never get it to work under Linux and I eventually accidentally smashed it in my messenger bag. Now I have a WPC11v4 piece of tripe with

pop3s server?

2004-07-12 Thread Eric Crist
What can I use as a secure (SSL) pop3 server. I'm trying to eliminate all instances of passwords being transmitted to my network unencrypted. Mail is all that is left. I want to setup pop as a secure service, before I worry about fighting with sendmail and SSL. TIA -- Eric F Crist Keep

Re: pop3s server?

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 18:16, Chris wrote: On Monday 12 July 2004 06:01 pm, Eric Crist wrote: What can I use as a secure (SSL) pop3 server. I'm trying to eliminate all instances of passwords being transmitted to my network unencrypted. Mail is all that is left. I want to setup pop

Re: pop3s server?

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 18:30, Doug Hardie wrote: On Jul 12, 2004, at 16:16, Chris wrote: On Monday 12 July 2004 06:01 pm, Eric Crist wrote: What can I use as a secure (SSL) pop3 server. I'm trying to eliminate all instances of passwords being transmitted to my network unencrypted. Mail

Re: pop3s server?

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 18:30, Doug Hardie wrote: On Jul 12, 2004, at 16:16, Chris wrote: On Monday 12 July 2004 06:01 pm, Eric Crist wrote: What can I use as a secure (SSL) pop3 server. I'm trying to eliminate all instances of passwords being transmitted to my network unencrypted. Mail

Re: pop3s server?

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 18:30, Doug Hardie wrote: On Jul 12, 2004, at 16:16, Chris wrote: On Monday 12 July 2004 06:01 pm, Eric Crist wrote: What can I use as a secure (SSL) pop3 server. I'm trying to eliminate all instances of passwords being transmitted to my network unencrypted. Mail

Re: Sound Blaster Live

2004-07-12 Thread Eric Crist
On Monday 12 July 2004 21:58, Javier Ramirez wrote: there is no another way??? no exist module for this card?? Your best bet is to follow LukeK's advice and add the following line to your kernel config file, recompile your kernel, and restart: device pcm I believe there is a loadable kernel

Re: BandwidthD syntax error?

2004-07-13 Thread Eric Crist
On Tuesday 13 July 2004 03:32, Irvine Short wrote: (cc'd to port maintainer) This is getting odder. I have found bandwidthd just works out of the box on FreeBSD 5.2.1 but on 4.8 4.9 and 4.10 I get a parse error. I upgraded one of my machines to 4.10 and it made no differerence. I've cut

Re: Apache and split logs

2004-07-13 Thread Eric Crist
On Tuesday 13 July 2004 16:45, Chris Burchell wrote: Is there any way (script / apache module / other) I can have the apache access-log split into separate access logs for individual virtual sites hosted on a FreeBSD box? -FreeBSD 4.10 -Apache 1.3.31 Thanks, Chris

Re: closer, no cigar.

2004-07-13 Thread Eric Crist
On Tuesday 13 July 2004 22:19, Giorgos Keramidas wrote: The first of these processes is sendmail started in submit mode by the `rc.sendmail' startup script. The relevant rc.conf options are: : sendmail_enable=NO : sendmail_submit_enable=YES : sendmail_submit_flags=-L smtpd -bd -q30m :

Outlook and TLS/SSL outgoing server...

2004-07-14 Thread Eric Crist
Hey all, I got my TLS/SSL aware mail server running on Sunday night or Monday. Kmail is configured and working for TLS on both sides, but Outlook is failing on the outgoing server. I've set my loglevel in sendmail to 20 and I get the following when trying to send an email with SSL enabled in

RE: FreeBSD beginner (NetBSD advanced)

2004-07-15 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wojciech Puchar Sent: Thursday, July 15, 2004 1:30 PM To: [EMAIL PROTECTED] Subject: FreeBSD beginner (NetBSD advanced) [snip] my questions: 1) what is Buf and Cache in top exactly? why buf on 96MB

First time CUPS user, config problems?

2004-07-17 Thread Eric Crist
Hello list. I'm trying to use CUPS for the first time, with all the good things I've heard/read about it on this list. I'm mainly trying to use it as I've got an OfficeJet G85 that I've never used with FreeBSD and linuxprinting.org has a 'mostly' working driver. Here's what I've done thus

Re: First time CUPS user, config problems?

2004-07-17 Thread Eric Crist
On Saturday 17 July 2004 03:17, Peter Risdon wrote: Cups installs /usr/local/bin/lp and /usr/local/bin/lpr and leaves /usr/bin/lp and /usr/bin/lpr in place. Back these up, symlink the cups versions into their places and try again. If you want to verify you have a properly running Cups before

Re: First time CUPS user, config problems?

2004-07-17 Thread Eric Crist
On Saturday 17 July 2004 05:05, Peter Risdon wrote: Eric Crist wrote: On Saturday 17 July 2004 03:17, Peter Risdon wrote: Cups installs /usr/local/bin/lp and /usr/local/bin/lpr and leaves /usr/bin/lp and /usr/bin/lpr in place. Back these up, symlink the cups versions into their places

Re: First time CUPS user, config problems?

2004-07-17 Thread Eric Crist
On Saturday 17 July 2004 14:14, Henrik W Lund wrote: Check out /var/log/cups/error.log for error messages. I like to crank the logging level to debug level 2 in /usr/local/etc/cupsd.conf as well, whenever it's not behaving like I want it to. Hope this helps! -Henrik W Lund k, I had to

Re: First time CUPS user, config problems?

2004-07-18 Thread Eric Crist
On Sunday 18 July 2004 02:08, Henrik W Lund wrote: First of all, verify that you've got both cups-base, cups-lpr and cups-pstoraster installed on your system. Do a pkg_info | grep cups to do this. If all these three packages are installed, please provide the last, say, 10 lines of your

Re: First time CUPS user, config problems?

2004-07-19 Thread Eric Crist
On Monday 19 July 2004 03:39, Henrik W Lund wrote: Funny. There doesn't seem to be anything wrong here. Unless, of course, it Saw EOF a little early. What did debug level 2 tell you? I know mine said something about some filter somewhere that was needed, but not found. This is mysterious.

Re: FreeBSD and WinNT

2004-07-22 Thread Eric Crist
On Monday 19 July 2004 09:27, Fractal wrote: I have a FreeBSD 4.8 and I need to install on the same machine WindowsNT-like operating system. I tried to do this and installed it. But after recovering of BSD bootstrap loader using sysinstall I found that I cannot load Windows. Namely, there was

Re: HP DeskJet

2004-07-22 Thread Eric Crist
On Tuesday 20 July 2004 21:22, Paulo Fonseca Jr. wrote: how to print easly with HP deskjet on freebsd5.1+kde3.1.2 ? Can anybody help me? Zumba. check out the CUPS port, /usr/ports/print/cups or the apsfilter port, /usr/ports/print/apsfilter. I prefer the latter, as it uses your native

RE: can I use Make from within KDE Shell Konsole

2004-07-27 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Ryan Sent: Tuesday, July 27, 2004 8:57 PM To: FreeBSD Subject: can I use Make from within KDE Shell Konsole It is safe to install ports from within KDE ? At present I shut down KDE, go to

RE: Freebsd Test Brower

2004-08-02 Thread Eric Crist
There is an https version of lynx. Check the ports tree. Found on Conan O'Brian: Children's books written by celebrities; By Mel Gibson: Jesus Christ and the Terrible, Horrible, No Good, Very Bad Day. - Keep your powder dry and your pecker hard and the world WILL turn. - Eric F

Remote backup hosting setup?

2004-08-03 Thread Eric Crist
Hello list, I was recently contacted by a lawfirm that needs a remote backup solution to help bring their insurance rates down. I've decided to go ahead and do this, as their needs are not that great. What I'm asking, is how best to setup this situation. I've never played with jails or

RE: Remote backup hosting setup?

2004-08-04 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Aslat Sent: Tuesday, August 03, 2004 7:33 PM To: [EMAIL PROTECTED] Subject: Re: Remote backup hosting setup? In the immortal words of Eric Crist [EMAIL PROTECTED]... I was recently contacted

RE: Freebsd Test Brower

2004-08-04 Thread Eric Crist
-Original Message- From: Dee Gaans [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 04, 2004 4:54 PM To: Eric Crist Subject: RE: Freebsd Test Brower Thanks for the response.. I guess I confused you with a different Erick.. Sorry about that.. So do you by any chance know how I

RE: It's a little troublesome~~~

2004-08-04 Thread Eric Crist
I got a problem about the a lot of E-mails from FreeBSD Everytime I open up my Outlook Express I receive a lot of E-mails from FreeBSD members Where could I cancel the E_mails receiving?? ___ [EMAIL PROTECTED] mailing list

RE: Hacker Scans - Advice requested

2004-08-07 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Bruce Sent: Sunday, August 08, 2004 12:16 AM To: [EMAIL PROTECTED] Subject: Hacker Scans - Advice requested Please can you help me? I am getting increasingly plagued by this message in my

RE: Hacker Scans - Advice requested

2004-08-08 Thread Eric Crist
-Original Message- From: Mike Bruce [mailto:[EMAIL PROTECTED] Sent: Sunday, August 08, 2004 7:32 AM To: 'Eric Crist' Subject: RE: Hacker Scans - Advice requested Many thanks Eric I've looked through the documentation and it is not entirely clear how to do this, but at least I

RE: IPFW/NATD Transparent Proxy

2004-08-08 Thread Eric Crist
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Sunday, August 08, 2004 5:43 PM To: [EMAIL PROTECTED] Subject: Re: IPFW/NATD Transparent Proxy On Sunday 08 August 2004 04:38 pm, JJB wrote: A new rewrite of the FreeBSD

  1   2   3   >