Hi
Subj from CVS (with vlan support), FreeBSD 4.8-p16, 4.9-p3 and 5.3-Stable.
I installed Subj on the two my routers and noticed that it does not work as
should. I investigated the problem and discovered the following: vrrpd use
the different destination MAC addresses for sending VRRPv2
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all. They timeouted on ATA
and hang while probing asr0, but 5.2.1-R installed fine. Any suggestion? I
would like to use 5.4-R. Does anybody use the subj with 5.3-R or later?
Best Regards
--
In safe mode 5.4-B1 and 5.3-R is booted fine from install CD without any
hangs.
On 29 2005 12:44, you wrote:
Have you tried installing it in safe mode?
Eugene Mitrofanov wrote:
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all
FYI: the problem is solved. I've installed 5.2.1-R and cvsup to 5.4-pre.
All works fine for me. It seems that it is a feature of the GENERIC kernel
from 5.3 / 5.4 boot cd.
Thanks
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all. They
Hi all,
I just updated to 8.2S and zfs v28 and notice strange thing: in the manual i
can read about aclmode but i can not use it in the real life:
# zfs set aclmode=passthrough data/public
cannot set property for 'data/public': invalid property 'aclmode'
Obsolete manual?
Good luck
--
Thanks a lot
On Tuesday 26 July 2011, Martin Matuska wrote:
Dňa 22. 7. 2011 9:48, Eugene Mitrofanov wrote / napísal(a):
Hi all,
I just updated to 8.2S and zfs v28 and notice strange thing: in the
manual i
can read about aclmode but i can not use it in the real life:
# zfs set
Hi List
I've got Subj and FreeBSD-5.4PRE on it. But RAID0 is too slow:
[EMAIL PROTECTED]:eugene# dd if=/dev/zero of=/var/tmp/1 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 31.949508 secs (3281979 bytes/sec)
Also what does the following mean?
Interrupt storm
Hi
I observe the very strange message while run a lot of commands:
r...@beaver:eugene# glabel status
Unexpected XML: name=stripesize data=18432
Unexpected XML: name=stripeoffset data=0
Unexpected XML: name=stripesize data=18432
Unexpected XML: name=stripeoffset data=0
Name Status
How can I locate this device? Also I dont understand why mdconfig complains?
On Tuesday 14 December 2010, Ivan Voras wrote:
On 14/12/2010 15:27, Eugene Mitrofanov wrote:
Hi
I observe the very strange message while run a lot of commands:
r...@beaver:eugene# glabel status
Unexpected
On Tuesday 14 December 2010, Ivan Voras wrote:
On 14/12/2010 16:19, Eugene Mitrofanov wrote:
How can I locate this device? Also I dont understand why mdconfig
complains?
Try examining the output of
# sysctl -b kern.geom.confxml
Here they are:
mesh
class id=0x807a5a20
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD: permission denied.
Output of zfs get jailed tank/s1 shows me that the property jailed is
still exists:
NAME PROPERTY VALUESOURCE
tank/s1 jailedoff default
How can
On Saturday 22 May 2010, jhell wrote:
On 05/21/2010 07:55, Eugene Mitrofanov wrote:
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD: permission denied.
Output of zfs get jailed tank/s1 shows me that the property jailed
On Monday 24 May 2010, jhell wrote:
On 05/24/2010 02:13, Eugene Mitrofanov wrote:
On Saturday 22 May 2010, jhell wrote:
On 05/21/2010 07:55, Eugene Mitrofanov wrote:
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD
Hello
I need the advise. Does anybody got the Subj working?
I have FreeBSD 7.3-p2, Generic kernel. I try to set up the netflow traffic
accounting using ng_ipfw from vlan interface. I created vlan interface, ipfw
rule, set up ng hooks but the netflow export is not working. tcpdump does
not
14 matches
Mail list logo