? Or is SATA only
supported in 5.x?
What can I do?
Thanks in advance
- Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
.
Florian wrote:
Hi!
On advice, I downloaded FreeBSD 4.10 RC2 (because 5.2.1 would not work)
but can't install it because the installer does not find my HDD which
is a 120gb Seagate drive on an on-board Silicon Image SiI 3112 SATARaid
Controller.
Is SATA support not yet implemented in RC2
back to the
shop 7 days after buying it) which 802.11g pci card is really known to
work with freebsd 5.4 ?? (because i've also be looking to man pages
saying it was supported)
thanks for your help !
Florian
Luke St.Clair wrote:
I'm attempting to use the netgear wg311T card, which I bought
time on
google looking, and even had found a great tutorial... once, but I lost
the bookmark for it, so I know there is one out there! I was wondering
if anyone would know where that great AMP tutorial is.
Anywho, So... if any others have suggestions?
Best Regards,
Florian Mettetal
If you want something new and yet very powerfull, you can try AWS (Ada
Web Server).
This an HTTP server written in Ada (so very robust). It supports many
protocols and is very simple to use.
You can find more information on http://libre.act-europe/aws
Florian
Ajitesh wrote:
Hi Friends, I
,
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
This is exactly what I needed. It works perfectly.
Thanks a lot.
Florian
Malcolm Kay wrote:
On Sun, 2 Nov 2003 01:51, Florian Villoing wrote:
While testing acpi, my system crashed. I had an open xterm viewing the
acpiconf man page. For now, when I want to see the man page again, I get
/sys/GENERIC i386
Florian
Vinc wrote:
hi all,
Does any of you had some troubles with mozilla/firebird? when I want to write
something in the adressbar, it freeze and when I want to put a keyword in google
it freeze.. please help..
I haven't subscribe to this mailing list so please, email me
for help
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Florian
Baier
Sent: Saturday, January 17, 2004 7:50 AM
To: [EMAIL PROTECTED]
Subject: isdn soft modem
Hi,
i'm running FreeBSD 5.2 and want to use my internal AVM Fritz!-Card
to
establish a Dial-in (56k Modem) and Fax-in Service (14.4k
Fax-Service).
I
the machine except putting in
more physical RAM?
Help appreciated.
Florian
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Yep, I mean login class and I ran cap_mkdb afterwards.
Any other hints?
Florian
I tried to limit core-use of mldonkey by putting it into a seperate
login group with a lowered maxmemorysize but that had no effect. I also
niced it up, but that has no effect on swap usage, of course.
When
to the above, yet..
Thanks to all in advance.
All the executable scripts located in /usr/local/etc/rc.d/ will be
executed during bootup.
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
. Or bounding a
'dead_grave dead_circumflex' to another key didn't work either.
That's weird, it's the first time i can't make these dead-keys working.
Could it be a laptop issue? (Toshiba Satellite 3000).
Thanks in advance,
Florian Ponroy.
--
L'amour... Il y a ceux qui en parlent et ceux qui le
On Mon, Jun 09, 2003 at 04:57:47PM +, Florian Ponroy wrote:
Hello,
I've recently installed FreeBSD on my laptop, fetched the kernel sources
to upgrade from 4.8-RELEASE to 4.8-STABLE, and now i'm trying to make
these dead-keys working under XFree :)
Well, it doesn't work at all. 8 bits
On Wed, Jun 11, 2003 at 06:26:47AM -0400, Dragoncrest wrote:
Hi all. I was cruising my mail logs today on one of my servers and
noticed this error that had been recorded for one of my users.
fetchmail[94074]: Server CommonName mismatch: localhost.localdomain
!=
Hi ppl!
Does anyone know where I can get the traceroute6 source code (I need that for
studies)...
Thanx in advance,
Florian
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
The directory:
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-5.2.1-release
is empty!
Why is this?
Thanks Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
?
Thank in advance
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
for
real serial connection (initialisation ...) which is a bit to much
for me.
In the end I just wan't to see the chars sent over the cabel
and wan't to reply to them by typing on the keyboard, that's it!
Thanks in advance
Florian
PS: Maybe a simple shell/perl script can help, should I focus
thing is that there seem to be problems with the avr-tools
my current work depends on. Is it somehow possible to keep this package
as it is while upgrading.
What about upgrading the kernel only?
Thanks a lot,
Florian
___
freebsd-questions@freebsd.org
nonsense?
Tell me if this is true.
Yours, Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
an
manages all netbios stuff.
By the way: If samba conflicts with XP, how do XP machines
manage not to get in trouble if there is more than one XP box?
Thanks,
Florian
David Landgren [EMAIL PROTECTED] schrieb:
Florian Hengstberger wrote:
Hi!
I'm working in an office with several win hosts
Hi list!
I'm still using 5.2.1 and samba from /usr/ports/net/samba.
Is there a way to disable ldap, it seems that it is compiled
into the binary. Do i have to recompile (which switch?) or
is there a simpler way.
Thanks
Florian
___
freebsd-questions
Disabled by default? Sorry, but I've never specified any
ldap options in my smb.conf but the server always tries
to authentificate the users with an ldap server.
Florian
Joerg Pulz [EMAIL PROTECTED] schrieb:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 27 Feb 2005, Florian
of sin,
is this part of the standard?
Secondly the definition (not declaration) of double sin(double)
misses a variable!
Is this ok, when the variable is not referenced in the code?
Thanks in advance,
Florian
--
Linux/BSD: The daemons are not longer
255.255.255.0
defaultrouter=62.116.56.1
firewall_enable=YES
firewall_script=/etc/rc.firewall
firewall_type=/etc/myfirewall.conf
firewall_quiet=NO
firewall_logging=YES
tcp_drop_synfin=YES
imcp_drop_redirect=YES
sshd_enable=YES
ntpdate_enable=YES
ntpdate_flags=-b
Thanks for any hints!
Florian
KERNEL
-139 via vr0
Thanks a lot
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
or a reference to
the Ipfw-Advanced-Supplement-HOWTO, which covers this
case.
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
but
things haven't changed. I'm a little confused, because fetching data
from FreeSD ftp-servers doesn't work too (remember that some fetches
were successful!).
Please help me,
Florian
--
Florian Hengstberger
[EMAIL PROTECTED]
http://stud3.tuwien.ac.at
Hi!
I#180;m unseccussfully searching for a pdflatex port!
dvips and ps2pdf or something does not meet my needs.
Case there is no port: is there something equivalent?
Best regards
Florian
--
Linux/BSD: The daemons are not longer just in my
Hi!
I?m searching for a cheap wlan pci card (below 40 euros),
supported by both freebsd and linux.
What is the best choice, which cards does freebsd support out of
the box (without nasty workarounds)?
Is there a hardware database for freebsd or something similar?
Thanks in advance
Florian
@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
florian meister
EMAIL: [EMAIL PROTECTED]
TELEPHONE: +43 5572 501 134
FAX: +43 5572 501 97134
ADDRESS: gutenbergstrasse 1
6858
. It will be loaded into a ramdisk and then the stick is
unmounted. So you have the same config after reboot, no matter what you
change. (You can do a write-config if you want to save it).
I think it's a very nice project, but I am searching for the same in
*BSD. Is there such a project around ?
thanks, florian
both a fair chance in hardware-questions.)
Thanks in advance
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi!
I have a standard pc-style computer, how do I enable
acpi?s automatic shutdown (adding something to /boot/loader.conf ?)
so that I don?t have to press the power button in then end?
Thanx
Florian
___
[EMAIL PROTECTED] mailing list
http
keyboard is a standard device (Vendor: Trust),
I?m working with the 5.2 release.
The funny thing about this is, that everything works fine
in the text console!
Thanks in addvance
Florian
--
Florian Hengstberger
[EMAIL PROTECTED]
http://stud3
Hi There !
Is there a way to use a bootable CD instead of a bootable floppy to
start the FTP-Installation ?
I simply don't have a Floppy-drive any more
--
Florian Haas
[EMAIL PROTECTED] or [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http
lsmod, is there a tool which lists the loaded
kernel modules?
How can I find out which driver modules are used for my
network card?
Thanks a lot,
Florian
--
Linux/BSD: The daemons are not longer just in my head
nmap or is there a BSD-network scanner,
which usage is recommended?
Thanks in advance,
Florian
--
Florian Hengstberger
[EMAIL PROTECTED]
http://stud3.tuwien.ac.at/~e0025265
Hi!
I bought the latest LabView Version (7) under a restricted
student license. To be exact: without linux support.
The thing I'm interested in is that my LabView Version runs under
MacOS X. Is there a way to get it running under FreeBSD too?
Thanks a lot,
Florian
of the directories of /usr/local/share/cups/model splitted
up in
languages (de, en ...), quite different to my Linux distro?
I want to copy a .ppd file into one of these directories, but I cant
figure out in which!
Im using FreeBSD 5.2.1
Thanks in advance
Florian
Hi!
The subject is the question:
Is the 5.3 release the stable release?
When will become 5.* stable?
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
of cups now, but I'll do this if necessary.
Thanks Florian
PS: I want to apologize for this inexact description,
but I'm recovering all this from memory now, my internet access
is far away from my computer.
--
Florian Hengstberger
[EMAIL PROTECTED
.
What am I doing wrong?
I guess its simple, isn't it!
Thanks Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi!
I mounted the proc-filesystem under /proc but in contrary
to Linux no additional information concerning the bus,
the cpu etc. is there?
Why is this? I like to
cat /proc/bus/usb/devices
to see if the system took notice of my usb-stick.
Thanks a lot
Florian
the IEEE standard -
2**52, the space reserved for representing the fraction of
a floating point number.)
Anyway I can calculate 2**n, with n up to 1023 exact.
Why is this???
Thanks
Florian
PS: I even had a look at the assembly code, for printf
the %lf and than twice 32bit a pushed on the stack before
recommend.
If both are ok: what's the difference?
Thanks a lot
Florian
--
Linux/BSD: The daemons are not longer just in my head!
--
Florian Hengstberger
[EMAIL PROTECTED]
http://stud3
and assigned first or
due to which fact are the network-cards numbered?
Thanks a lot
Florian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
hi!
Can anybody recommend an in deep guide to ipfw?
I googled now for a longer time and found nothing really apropriate.
The FreeBSD security howto is a little short, other guides
don't cover security topics.
Is there something like OpenBSDs pf-docu for ipfw?
Thanks a lot
Florian
ntpd_flags=-c /etc/ntp.conf
#system settings
keymap=german.iso
#linux_enable=YES
moused_enable=YES
Secondly: I'm only running ntp and ssh (and mozilla), why is a socket
listening on the smtp port?
Thanks in advance
Florian
PS: Sorry for the output of netstat and tcpdump
Following the istructions of Mrs. Lavigne on ONLamp.com
I was trying to build a kernel with the options TCP_RESTRICT_RST.
config ignores this option.
How can I include this in 5.2.1, I can't find a similar
option in my LINT file.
Thanks
Florian
Florian.
[0]: http://roladder.net/~flo/picdump/htop.jpg
[1]: http://forums.freebsd.org/showthread.php?t=26951
[2]: http://github.com/jeffwar/utop
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Mon, Feb 20, 2012 at 05:46:35PM +, jb wrote:
Florian Unglaub ueber at roladder.net writes:
...
htop relies on linprocfs(5) to gather process statistic. linprocfs is
mounted:
linprocfs on /usr/compat/linux/proc (linprocfs, local)
...
$ cat /etc/fstab
...
linproc
Hi!
Just a short question:
When I download compiled packages with pkg_add -r, where
are the binary packages stored? I want to share them over the net
for other hosts.
Thanks, Florian
___
freebsd-questions@freebsd.org mailing list
http
binaries
which will run in the emulation?
Thanks a lot,
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
named 314 24 udp4 *:53 *:*
...
The man page of sockstat does not give information about * int
the last column, but I assume this means 'listens on all interfaces'.
How can I avoid this?
Many thanks,
Florian
___
freebsd
first with pkg_delete(1).
*** Error code 1
Stop in /usr/ports/print/dvips.
How can a tex distribution conflict with and dvi to ps
converter???
Am I doing something completly wrong?
Thanks a lot,
Florian
___
freebsd-questions@freebsd.org mailing list
http
if the've finished their work??
Thanks Florian
Roland Smith [EMAIL PROTECTED] schrieb:
On Mon, May 16, 2005 at 11:11:22PM +0200, Florian Hengstberger wrote:
Hi!
Why do latex and tetex conflict?
Firstly I installed latex but couldnt find the koma package
but all tools (dvips, xdvi
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
burnP6).
I'm really thankful for any input on this matter.
Florian.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
performance_cpu_freq=HIGH
I tried it with your powerd flags and the performance_cpu_freq setting
on HIGH, but still the maximum freq_levels entry is 2800.
Florian
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
krad kra...@gmail.com writes:
is the uefi/bios setup correctly? Multiplier could be wrong or turbo
could be disabled
I rechecked my Bios settings and it's all ok. Test booting windows and
using Intel's Monitoring tool also gives 3.2GHz on a single core if
there's enough load.
Florian
: files nis in /etc/nsswitch.conf which didn't help at all.
Regards
Florian Wagner
signature.asc
Description: PGP signature
65 matches
Mail list logo