Hello,
This is probably more PC-specific than freebsd-specific question. I have
intel firmware raid. OS needs drivers to work with it. FreeBSD sees it as
ar0, so it has drivers.
But I want my OS to be installed on this drive and boot from it. It is not
good idea, but I really want to do it:)
Is
Thank you.
I configured boot0 to my ar0 and tried to boot from it. It freezes.
I use RAID10 and Intel-ICH7.
Looks like I've faced with some other troubles..
Ilya.
On Wed, Mar 16, 2011 at 4:05 PM, mcoyles
mcoy...@horbury.wakefield.sch.ukwrote:
This is probably more PC-specific than
My boot0 freezes. I found discussion where guy told that extipl works fine
but boot0 not because extipl uses LBA instead of CHS and some raids do not
support CHS.
It is new to me that BIOS allows LBA but I will try extipl now.
On Wed, Mar 16, 2011 at 5:11 PM, b. f. bf1...@googlemail.com wrote:
Your postfix does not relay mails from this client.
See http://www.postfix.org/SMTPD_ACCESS_README.html
http://www.postfix.org/SMTPD_ACCESS_README.htmlI suggest you to remove
your IPs from messages next time. By the way, postfix should have its own
mail-list, not freebsd:)
On Wed, Mar 16, 2011
Afaik there should be LM in AMD features output. Even for Intel. Grep
your dmesg.boot for LM.
On Fri, Mar 18, 2011 at 12:33 AM, Tait free...@t41t.com wrote:
I have a remote server, and I'd like to know if it will support
64-bit instructions. Is there some way I can tell? It's running
Ola,
You have BIND 8.3 as you wrote to me. Check manual if it supports SRV
records. If so -- you do not have to upgrade your OS now.
FreeBSD 4 is REALLY OLD but I do not think upgrading freebsd is what you
want to do now: your issue is to update SRV record, right?
On Fri, Mar 18, 2011 at 12:48
Hello,
What name server do you use? I am almost sure you have BIND.
You must open your zonefile, add SRV record and reload zone.
I think your zonefile is somewhere in /etc/namedb/
read bind manual, man named and man ndc (or rndc) to solve your problem.
Your question is not about freebsd but
AMD Features=0x2010NX,LM
AMD Features2=0x1LAHF
Cores per package: 16
Logical CPUs per core: 2
The Intel site does say the E5520 supports x64. It seems the lack of LM
in the original system does in fact mean it's a 32-bit only processor.
Look again: AMD
You can use fdisk -B to install non-interactive boot manager. Or you can
use -t in boot0cfg to make timeout equals to zero.
If after it you STILL have F1 -- you probably boot from another drive: not
da0 but da1. How many drives do you have? Check your BIOS settings to find
which drive you boot
You need to install boot0cfg in your MBR
man boot0cfg
http://www.freebsd.org/doc/en/books/handbook/boot-blocks.html
http://www.freebsd.org/doc/en/books/handbook/boot-blocks.htmlHonestly you
can use any MBR loader you like (grub, lilo, boot0cfg, windows). Windows
can't access boot sector on
AFAIK intellij has several IDEs (for python, ruby, php) but not sure about c
and c++
Their java ide is very good and popular, and other based on the same
platform, so they may be good too.
On Sun, Mar 27, 2011 at 5:41 PM, Alokat mail...@alokat.org wrote:
Hi,
I'm searching for a good IDE for
If you use VI, be sure to install http://insenvim.sourceforge.net/ :)))
Intellisense is the difference between IDE and text editor
On Sun, Mar 27, 2011 at 10:57 PM, Chris Brennan xa...@xaerolimit.netwrote:
On Sun, Mar 27, 2011 at 2:07 PM, Chip Camden
sterl...@camdensoftware.com wrote:
Quoth
If there is a choice between making things easy to learn and easy to use,
the design principle is to make it easy to use - even if that comes at the
cost of a steeper learning curve.
And you can always create easy-to-learn GUI-based tool that works on the top
of low-level tools.
BTW Microsoft
Could you provide us this message?
On Tue, Apr 5, 2011 at 2:08 AM, David Collins davidcollins...@gmail.comwrote:
Hi List,
I have been using FreeBSD for a number of years and love it. I have a
friend who is competent it linux and wanted me to help him get started
with BSD.
He has an amd64
Hello,
From my laptop if I ping the server:
ping www.mydoamin.com
ping: cannot resolve www.mydoamin.com: Host name lookup failure
But if I log in to the server and do the same ping, it works fine.
1) check your laptop is configured to work with this DNS server (cat
/etc/resolv.conf on
i want to connect my freebsd system to modem and configure it via my
freebsd. i thought that i should change /etc/ttys file to set speed and
other configuration. in order to check if i am right or not, i comment ttyu
line in ttys file and expect the modem got disconnected but the modem still
Hello,
honestly, i should do it for my boss and don't know what he should want
exactly to do but i am sure that he has an external serial modem and wants
to config it by AT commands via a freebsd system; therefore i think our
connection is dial-out.
1) Make sure your serial port and modem
Hello,
On Thu, Nov 29, 2012 at 2:57 PM, Bill Tillman btillma...@yahoo.com wrote:
i386 will not see anything above 4 GB
Actually you *can* give access to 4Gb RAM for your system: PAE allows you
to use 36 bits instead of 32 to address your memory (and supported till
Pentium Pro) but that is
Any process that stores data there would be really surprised when you clear
it:)
PHP uses tmp to store sessions and that is a good example:)
tmp may be cleaned after server restart
On Thu, Nov 29, 2012 at 8:19 PM, Gary Aitken free...@dreamchaser.orgwrote:
Any reasons why one should not clear
How does the system know what is OS and what is 32-bit apps?
OS works in kernel space while application is not.
PAE affects paging system allowing software to address 2^36 bytes of memory.
You can access it in kernel space, but user space applications are limited
to 2^32 bytes of virtual memory
Hello,
ppp is used when you want connect to internet via modem. i just want to
config my modem by AT command.
when my ppp.conf file is empty, i can talk to my modem so this config file
do nothing what you want talk to your modem.
if i want to talk to my modem by a specific speed, which
On Sun, Dec 2, 2012 at 10:36 PM, ren_...@yahoo.com wrote:
Hello, I was wondering if you can use Gnome to run your FreeBSD server,
instead of using let's say Direct Admin ?
If so, is there any literature on it ?
Thank you,
Sam Fasciano
Sent from my Verizon Wireless BlackBerry
You can
On Mon, Dec 3, 2012 at 5:40 AM, Fbsd8 fb...@a1poweruser.com wrote:
On an old 20gb hard drive I first installed winxp on the first half of the
HD. winxp booted fine. Then I installed 9.1-rc3 on the second half of the
HD. Now when I boot the HD I only get 9.1-rc3. Winxp created mbr and
hello everybody
i have freebsd8.2. i want to redirect incoming telnet from telnet port to
a com port. i mean if somebody telnet to my system with a specific port (or
22 which is default telnet port), connect to com port and can talk to modem
(something like cisco).
is it possible or not?
Hello Oliver,
NameMtu Network Address Ipkts Opkts
em19000 Link#2 00:0e:0c:5c:32:29 92M 129M
em19000 10.41.170/24 ufo2000 924K 926K
Use tcpdump to find out what traffic do you have there.
There are a lot of protocols that work on
Hello,
Your SSH client probably configured for different charset.
1) use locale command to check your LC_*.
2) echo $TERM to check terminal type
3) In case of putty check Window / Translation / Remote charset
4) In case of unix-based client check locale there.
d...@prime.gushi.org wrote:
Hey
To open some url you need to use web browser.
Sending URL to freebsd mail list would not open it.
On Tue, Jan 1, 2013 at 5:01 PM, Bekim's Mac bekimbisl...@gmail.com wrote:
___
freebsd-questions@freebsd.org mailing list
http://www.freshports.org/www/suphp/
Is not it what are you looking for?
On Fri, Jan 4, 2013 at 2:29 AM, Matt Rauch mattr-li...@eagle.ca wrote:
suPHP
___
freebsd-questions@freebsd.org mailing list
28 matches
Mail list logo
