We are having Server with FreeBSD 4.6.2 - Release. I would like to know
Some basic paths Commands to start, stop the apache, sendmail , ftpd,
mysqld services. How or Where Iwill find these services means what is the
path for those.
Please help me in this issue.
If they were installed from the
Hello,
How do I add a disk containing data to a new system without erasing
that data.
Check dmesg output to see the device name. Then try to mount that hard disk.
If everything went fine, you might want to mount that HDD on every boot so
check
/etc/fstab.
I know this is an issue that comes up a lot, but I wanted to get
an opinion from some people on the list. We, along with everyone
else, have TONS of SPAM hit our server. Unfortunately, we
haven't found any good way to reduce it. We're using ORDB and
SpamCop, but neither are really
Hello,
I have Intel P4I865G Chipset with AC'97 v.2.2 onboard audio
and I would like to know if it is supported by the FreeBSD
4.8-Stable kernel. If it is - how can I bring my sound card
up ? What line should I add to my kernel configuration file
It might work with pcm driver.
I have installed my first port! But don't appear to know where to run
it from... Getting file not found all over but can read the man so
believe it's there.
# cd /usr/ports/net/trafshow
# make all install clean
...
# trafshow
trafshow: Command not fount
# rehash
# trafshow
:)))
This is
I need to be able to tell the modem not to detect a
dial tone when using ppp.
After typing 'AT' I get 'OK'. After 'ATDT1234567' I
get 'NO DIAL TONE'
I'd like to use NAT to connect machines in my LAN to
the net. Is there
any command that I can give it in ppp.conf to tell it
not to detect
Is there a way to test bandwidth with a free bsd box?
There a some utilities in the ports tree to test the network speed, but you
can also use your favorite browser in your favorite X shell, to check the
DSL/Cable speed. www.dslreports.comm/tools
What is the name of the /dev for the serial port in FreeBSD. dmesg says
there are sio0 and sio1 but there are no such file names in /dev.
Most devices in the kernel are accessed through ``device special files'',
which are located in the /dev directory. The sio devices are accessed
through the
so got a complete traceroute. Any idea why I can't ping but can
traceroute? I am
unable to run make install to install ports because it doesn't connect.
They are using firewall (ICMP blocking).
Are you sure with the ports? Sometimes it takes a while.
What about ftp ftp.freebsd.org?
What is
point is password protected (on the XP side) so I am prompted for a
password. How can I automate that? Or should I create the share without
a
password? I am not too worried about internal security so the share could
have no password and that would be fine.
Create a script called
Hi fellows, I am using a freeBSD box with Gnome+Enligthment, I would like
to know
which applications should I install to administer my users, network
connections and
You can use webmin (/usr/ports/sysutils/webmin), a Perl script that allows
you to administer your computer via browser. You can
please let me know if i MUST hold a connection to the
internet during the installations.if so, is there a
way to avoid that connection?
Download the tarball into /usr/ports/distfiles.
Then do
# cd /usr/ports/audio/mpeg123
# make all install clean
To Unsubscribe: send mail to [EMAIL
My question is If I want to load it from a CD. What
should I write on the CD from the ftp site. I am too
confused with the directories in the ftp site.
Download the ISO image.
ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/4.7
You will need only first ISO image. You will need a cd
I have a few mp3 files I'd like to burn an audio cd from. I use mpg321
for playing mp3's, and burncd to burn cd's, so my first thought was:
let's pipe them together. I read the man pages, and tried this:
You need to convert these tracks into WAV. I prefer lame
(/usr/ports/audio/lame).
# lame
Has anyone besides me been receiving a flood of infected emails?
I am flooded too. From 8:00AM (EST) till now (11:40AM) I received almost 120
of these emails. I am using Norton Antivirus 2003. The attachments were
purged automatically. According to
Does anyone know any good tutorials sites for qmail and vpopmail? im
trying
to set up a mail server for multiple domains.
http://www.tigertimes.net/vpopmail/Qmail-FreeBSD.txt
___
[EMAIL PROTECTED] mailing list
I am trying to build OpenGroupware from sources.
Using:
FreeBSD 4.7
GNU Make 3.79.1
gcc 2.95.4
Everything went fine until I've tried to build SKYRIX Core Libraires
# gmake -s nosasl=yes debug=yes install
NGActiveSocket.m: In function `-[NGActiveSocket _unixWriteBytes:count:]':
Thank you for your answer, but there is no manual entry for
qmail-remote. Do you have any links or documents about that?
Here:
http://www.qmail.org/man/man8/qmail-remote.html
___
[EMAIL PROTECTED] mailing list
domain name (machine1) -- using short name
May 28 02:39:17 machine1 sendmail[220]: h4S9dHh00220: from=root,
size=437, class=-60, nrcpts=1,
sendmail_enable=NONE
Put this in /etc/rc.conf to completly disable sendmail if you want. Do not
use NO.
3. An error message is
Thank you for your answer, but there is no manual entry for
qmail-remote. Do you have any links or documents about that?
Here:
http://www.qmail.org/man/man8/qmail-remote.html
___
[EMAIL PROTECTED] mailing list
Requested action not taken: mailbox name not allowed
Server replied: 553 sorry, that domain isn't in my list of allowed
rcpthosts (#5.7.1)
Try with this rc script. Just change the hostname.domain inside the script.#!/bin/sh
#
# This script starts and stops the qmail mail functions.
#
# Suck
I'm wondering where is the proper location to put a tarball (containing
source code) that I've downloaded and want to untar and compile. In Linux,
you generally would put it in /usr/src. I know all the FreeBSD documentation
says /usr/local is where all your personalized software
I put the
I am getting some weird crashes and i'd like to be able to rule out power
loss.
How many HDDs do you have? How many cards are installed? How powerfull is
your power supply? If you have AMD and 250W power supply, probably that's
the reason. Also, check the memory modules but they usually throw
I have ipfw + squid (ext NIC: fxp0, int NIC: dc0). Squid is listening on
port 3128.
Using ipfilter I will do
rdr dc0 0/0 port 80 - 127.0.0.1 port 3128 tcp
How can I do this in ipfw
00050 36764 12234591 divert 8668 ip from any to any via fxp0
00060 00 divert 80 tcp from any
I am trying to compile some C code and I get the
following errors:
windows.h: No such file or directory
Are you sure that the program is not Windows specific?
___
[EMAIL PROTECTED] mailing list
It doesn't have to be a GUI application, just the requirement of sockets
requires to include windows.h. If there're no more messages that missing
include file, simply remove the include.
Huh? Why windows.h for sockets when ... /usr/include/sys/socket.h
:))
computer saw the cable network, but the cable refused to accept a logon
request from the computer. The technician said that he believed that
neither B.S.D. nor any other Unix, nor any Microsoft product that could be
programmed to act as a server was acceptable. Has any other person had
the
i used the root/password in the server machine side
i put loggin/password but
a receive the message [ SRA login failed ]
You are not allowed to log as root using telnet or ssh. Log as normal user
then use su. And try not to use telnet. Use ssh instead.
I need a good ftp mirroring program. I've checked the ports and there are
couple of them. I don't have time to try them all, so any recommendation is
highly appreciated.
Thanks...
___
[EMAIL PROTECTED] mailing list
I have the following in /etc/syslog.conf. Notice lines (1) and (3).
I want to log news.notice ONLY in /var/log/news/news.notice but instead of
that I have the same output both in /var/log/news/news.notice and
/var/log/messages. If I remove *.notice from line (3) I am afraid that I
would not log
What are the CPU stats actually measuring? How is idle computed?
What's the difference between Inact and Free memory stats?
Check out this sample chapter. It is what you need. And the whole book is
also excellent.
http://www.nostarch.com/AbsoluteBSD18.pdf
I am going to buy a wireless nic for my laptop. Are there any models that
will automaticaly work when I put it in? What are the best ones?
No. You need to configure them first but it's not a big deal. It's very easy
and everything is
well documented (freebsd.org/handbook). I am using Cisco
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
rule and the power LED (green) light up when traffic is passed with an
ipf pass rule.
It's easier to use CAPS/SCROLL leds...;)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi,
my friend (Win9X machine IP: 10.10.1.10) is behind some gateway (10.10.1.1)
+ WebSense. I have FreeBSD 4.5 at home (2 NIC 24/7 DSL Internet, ext. IP
138.x.y.z, internal 192.168.0.1) and I am using it as a NAT.
What do I need to install (VPN as far as I know) on my FreeBSD and what
I am receiving several:
fxp0: device timeout
xl0: watchdog timeout
rl0: watchdog timeout
man fxp, man rl...Problem with the network connection, cable. Do you have
any other machines on the same network having similar problems?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
I have installed FREEBSD 4.5 on toshiba satellite 4100 and would like to
know what type PCMCIA network will work with it
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x2918.html
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the
same file and the kernel did not build. I'm now cvsupping
again and will rebuild world. If anything again goes wrong,
I will go and cvsup for RELENG_4_7_0_RELEASE, as
Keramidas suggested to another user.
I had the same problem yesterday and I had a luck with that small patch.
To
and use cheap memory, but this box has great memory
(can't remember which brand) and has been running 4.4
release for a year, then 4.6 release for the last 3
Oct 14 03:07:20 mas01 /kernel: Fatal trap 12: page
fault while in kernel mode
Fatal trap 12 is a hardware error, conflict but usually
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
traceroute...
19 g2-1.bas2-m.sc5.yahoo.com (64.56.207.150) 91.545 ms 94.781 ms 92.792
ms
20 vl44.bas2-m.sc5.yahoo.com (66.163.160.222) 92.311 ms 91.559 ms 90.283
ms
21
Hi,
I have a production PC (4.5-stable)
-- -
|172.16.1.3|---|172.16.4.10|---|172.16.4.11| - (Internet)
-- -
4.5 STABLECisco RouterPIX Firewall
-
One way is to use the tee command, e.g.:
[johnnyb@zappa johnnyb]$ ls | tee listing.txt
will send the results of the ls command to STDOUT and also to the file
listing.txt.
# man script
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of
Hi,
how can I prevent automatic updating of routing tables where one of the
flags has D (Dynamic). I tried to put
routed: ALL: deny in /etc/hosts.allow, but somehow I still got entries in
routing table.
Thank you!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
this way), but the DSL modem doesn't say anything (no happy 'OK', but I
am not sure if it is supposed to).
Anyhow, does anyone out there have this setup? Suggestions on changes to
my rc.conf or ppp.conf or anything?
http://renaud.waldura.com/doc/freebsd/pppoe/
Step by step explanation.
If I do:
ncplogin -A host -U userid -T domain
Use -S server instead of -A host.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
ncplogin -A host -U userid -T domain
Use -S server instead of -A host.
ncplogin: can't find server : syserr = Network is down
Check these QA I've found on google groups, they might be useful.
http://groups.google.com/groups?hl=enlr=ie=ISO-8859-1q=ncplogin+syserr+ne
I did not see an unkown device message on boot.
dmesg did not show it either.
What is the next step in the diagnostic process?
% dmesg | grep Ethernet
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I'm very disappointed, no burncd working, no more a hard disk...
The hardware was Asus + Athlon.
Unplug the cable from CDRW and try to boot. Double check jumpers and pin
1. Re-detect HDD from BIOS. It should work. If so, put CDRW on the second
controller as master, but make sure the jumper is
$ cat test.c
int main(void) { return (0); }
$ cc test.c
cc: Internal compiler error: program cc1 got fatal signal 11
Boot with old kernel and use the same above. What are the results?
On my system
% uname -a
FreeBSD goatrance.futurebit.com 4.7-RELEASE FreeBSD 4.7-RELEASE
to boot it for the firat time, and every time since, It
freezes when it gets to the networking area.
Can i disable ep0?
Try
# ifconfig ep0 down
but I doubt that is the problem.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi
Is anyone using a low profile PCI 10/100 NIC that is happy with it?
I am using dual NIC with Intel 21143 (no name card) and D-Link 530TX+.
Because, my FreeBSD serves as a gateway I have over 3Gb daily transfer
(SoulSeek, Kazaa etc...). Except some increasing TX threshold messages in
I tried to rebuild kernel even, but without result.
The network card is not detected.
What to do? Help, please.
Are you sure that your NIC is working fine? Try another PCI slot and remove
all PCI cards except video card. Reboot and check dmesg to see if your card
is there.
To Unsubscribe:
Works fine in Win2k. Generic PS/2 worked fine before
I switched.
Option Protocol Auto
Option Device /dev/psm0
There are two XFree86Config files. Maybe you are modifying the wrong one.
Just a guess...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in
With one modification to /etc/X11/XF86Config I had
created a bigger problem(X died completely) so I
presumed that was the place.
Where is the other file?
/usr/X11R6/lib/X11/XF86Config
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the
In the /usr/X11R6/lib/X11/ directory, I only have
example config files. One is XF86Config.98 and the
other is XF86Config.eg.
So you have one XF86Config file. Check this also, it might help.
http://www.xfree86.org/4.0.1/XF86Config.5.html
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
I remember reading something about a new program that makes tripwire
obsolute, but I can't remember the name. Maybe someone in here can tell
me what programs it is and if it is true, that it is better than tripwire?
Aide or Trisentry?
http://www.onlamp.com/lpt/a/2837 for Trisentry.
To
What is the easiest way of forwarding a port in FreeBSD. Suppose I want
my server to listen on port 8280, but want all connection attempts to
port
80 to be forwarded to this port ... can that be done?
Put this in /etc/ipnat.rules
rdr dc0 0/0 port 80 - 127.0.0.1 port 8280 tcp
And this in
milneweb# ls
My Pictures
milneweb# cd My Pictures
cd: Too many arguments.
Is it because of the space between the words? How do I get around this?
# cd My*
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Just has to log off and re login.
Well, if you are using csh or tcsh, etc you can just
do 'source .cshrc' to get it to suck in the latest.
... or
# rehash
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
How do I get a count of the files in directories? I need to be able to
get a listing of the number of files in a directory and counts for the
files in each sub-directory.
% ls -l | wc -l(In a directory)
% ls -lR | wc -l (Including sub-directories)
To Unsubscribe:
Does anyone have any information on setting up virtual private
servers with Freebsd? There are a lot of people doing it out there
but I can't seem to find any documentation supporting it.
As far as I know virtual private server is a remote FreeBSD server with
root access.
What ACTUALLY
and insert this line:
*/15* * * * root /usr/libexec/rs2
/var/log/rs.log
Check to see if you have extra blank lines after the last line. Delete them.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Is there any easy way to do Audio-CD copy?
%dd if=/dev/acd1c of=six.iso bs=2048
dd: /dev/acd1c: Invalid argument
%mkisofs -o six.iso -J -R /dev/acd1c
Total translation table size: 0
Total rockridge attributes bytes: 266
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used e804
Hi fellows I've installed Xfree withouth problems , my mouse deamon works
fine ,
but when the system loads Gnome my mouse goes crazy, I cant control it,
but in text mode my mouse works fine.Any Ideas?
Put Auto instead of PS/2 in XFree86Config.
To Unsubscribe: send mail to [EMAIL
Unfortuantely it didn't tell me where it expects the namedb dir to be, it
didn't put a startup script in /usr/local/etc/rc.d like other ports do..
Is this normal?
Should I just create my own and wing it?
Put the following in /etc/rc.conf
# DNS server
named_enable=YES
Mais comment dmarrer vncserver automatiquement au boot sans taper la
commande ??
Create the following file vnc.sh in /usr/local/etc/rc.d and put the
following lines
#!/bin/sh
/usr/X11R6/bin/vncserver
It will automatique start vncserver when you reboot.
To Unsubscribe: send mail to
I have downloaded the Helix Universal Server binary from RealNetworks.
As I understand it, the binary is a self-extracting archive. I have run
the binary and get the following error:
blacklamb# ./rs900-freebsd4-ia32.bin
Extracting files for RealNetworks installation...
Error: short read
Panic: pmap_bootstamp: no local apic!
mp_lock=0007; cpuid=0; lapic.id=
Uptime: 0s
I now it is kernel panic but why ?
Are you using standard GENERIC and LINT file?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Im looking for the BSD daemon logo in large enough quality to use for a
bumber sticker. If you know of bumper stickers available or where i could
obtain the logo in that quality, Please let me know.
http://www.zazzle.com/shirts/gallery/product.asp?product%5Fid=10013405side=
back
To
I just installed bash from the ports and changed my shell with the chsh
command.
I created a .bashrc file with a few settings and put it in my home
directory.
When i log out and log back in the .bashrc is not being executed. Is there
something that i need to do before that will work?
thanks,
I want to remove CRs from text files so what I did is this:
cat filename | tr -d '\r' filename
It's easier with 'tr' but you can also use vi.
# vi text.txt
:1,$s/^M//g
where ^M means that you need to hit Ctrl-V.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
I have the following in $HOME/.login_conf to use cyrillic characters on the
screen.
me:\
:charset=iso-8859-5:\
:lang=ru_RU.ISO8859-5:
Everything is fine, except that when I start midnigh commander or slrn, the
text is on russian. I only need cyrillic chars not russian text. I tried to
I'd have to say Squirrel Mail
http://www.squirrelmail.org/
I'm partial to http://www.horde.org AWESOME
http://www.openwebmail.org/ I am using this...
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Hi,
I have a strange problem with proftpd 1.28. When I connect to the ftp server
with a client (same problem from the inside/outside the network) I got that
message connected to abc.xyz.com immediately, but after that, there is a
lag for about 5 seconds before login prompt comes. After that
I have a strange problem with proftpd 1.28. When I connect to the ftp
server with a client (same problem from the inside/outside the network)
I got that message connected to abc.xyz.com immediately, but after
that, there is a lag for about 5 seconds before login prompt comes.
After that
I am having problem running snmpd (FreeBSD 5.1). After installing the port
with make all install clean, the startup script is not working with no
errors/warnings given. If I manually run the snmpd with
/usr/local/sbin/snmpd -s, I got this in /var/log/messages
snmpd[1206]: nlist err: neither nproc
drive I have at hand. Can anyone tell me (a) whether FreeBSD can burn
DVD-R's;
(b) whether it wil work with this drive; and (c) what commands are
required to
do the burning? All info much appreciated.
Check this link. It might help you.
http://www.whiterose.net/~mrpink/freebsd/dvdr.php
I wanting to know how I can add a user to the super use list so that I can
log in remote and sudo commands. I have notice that unlike linux, root may
not ssh in, which I think is cool, but unless I can create a super user,
or
add to the list that let's me run root commands kinda hard to admin
2) I have installed freebsd 4.9 on my Dell Inspiron 8100 laptop, when I
try to configure XFree86 I have to use the text based tool. After doing
that, when I run startx I get a grainy desktop that almost covers my
screen,
but not quite, and has only a clock window, a login window, and an
i would like to identify the anonymous passwd of our clients for
statistical purposes. I know that ftp transmits the username and passwd
in plain text. Is there a way to decrypt them.
Look for kripp and sniff in ports/security
___
[EMAIL PROTECTED]
Drew Tomlinson wrote:
I've also tried a combination of adding ()'s around the expression but
that hasn't worked either. What am I missing? Is this an appropriate
choice for what I want to do? Is there another command better suited
for this task?
Use quotes
# find . -name aaa -print differs
Maude User wrote:
Thanks for this info.
The handbook chapter on BIOS (see below) doesn't mention USB but it
says the machine
can boot from Removable Devices so it sounds like your first
suggestion about booting from
removable drives would work.
Even if you boot from the USB CD, there is a
82 matches
Mail list logo