Hi list,
I'm having hard time getting printing working from samba winXP client to
a printer parallelport connected to my FreeBSD-4.10-release box.
I have a HP Laserjet 1200 -printer, and am using LPD and apsfilter with
postscript driver as suggested by linuxprinting.org.
Everything works real
On Sun, 2005-01-23 at 23:06, Andras Kende wrote:
Hello,
Looks like the spool directories are different in /etc/printcap and
in smb.conf:
sd=/var/spool/raw:
path = /var/spool/samba
Try to set to the same path, also make sure windows user has
Enough privileges to write to spool
On Mon, 2005-01-24 at 04:48, McCy Ron wrote:
I have/had the same problem - couldn't print to the Samba shared printer
until I found in the
Handbook a couple of line of code that were missing in my smb.conf
[printers]
comment = Guttenburgs Pride
printable = yes
printing = BSD
Gert Cuykens
Does freebsd has programs to make music ? like sonar or logic or fruityloops ?
If you know tracking, cheesetracker seems to be nice.
Mikko
___
freebsd-questions@freebsd.org mailing list
Hi list.
I've found archives of freebsd-questions mailinglist very useful.
But I have found them difficult to search, as in one month there can be
many archives, not just one per month.
So I would like to merge all archives of the same month into a single
mailbox containing all messages sent that
Thanks everyone for the answers, but none of you really understood what
I meant :)
So let me rephrase.
I have archived mailinglist mbox format files on my hd, downloaded from
http://docs.freebsd.org/mail/
#ls
20021215.freebsd-questions 20040125.freebsd-questions
20021222.freebsd-questions
Hi,
Is there support on 6.0-current for soundcards?
I put the usual device pcm on kernconf, but it says
it don't know about that. I tried device sound, it compiles,
but there don't come support. If it's not supposed to, sorry
for this message.
Thank you for your time,
kstewart
On Saturday 11 September 2004 11:56 am, Lucas Holt wrote:
BEGIN RANT
Why is everyone running 6 current and expecting it to work? They
just created that branch recently and I seriously doubt that its even
close to usable. We could run 5-Current because it was pretty
I have a Lacie Orange 7Gb usb flash drive, into which I've tried to
install
FreeBSD 6-RELEASE a couple of times.
I've had no luck booting it, only a invalid diskslice -message after
normal
installation and boot.
However, netbsd3 boots nicely with default install off the drive,
as does
alden.pierre wrote:
/etc/rc.conf contains the following:
ntpdate_enable=YES
ntpdate_flags=timex.cs.columbia.edu
xntpd_enable=YES# Run ntpd Network Time Protocol
/etc/ntpd.conf contains the following:
driftfile/etc/ntp/drift
server 65.211.109.1
server 65.211.109.11
server 209.51.161.238
Hi,
it seems it's so common knowledge to achieve this,
that there isn't any info anywhere about it.
So, I have a winxp hard disk at the end of a sata pci-card,
and freebsd harddisk straight in the motherboard ide connection.
So if both are connected, freebsd starts,
and if I take cabled off the
I've been wondering about this some time now.
The linux compatibility layer (kernel module + linux_base -port)
is told to be able to run linux binaries. The handbook even describes
for a couple of heavy-duty applications how this is done.
However, after reading that part of the handbook and
12 matches
Mail list logo
