Hello folks,
I need you help about this issue. If I write more than 1 jail inside the
jail_list in rc.conf, neither of the jails are started.
my system is a vmware workstation machine, with guest os freebsd
8.0-release. nothing is changed in the OS.
here is the rc.conf:
hostname=freebsd2
.
It seems there is a hanging process but I cannot find it.
Any help is appreciated.
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hi Devin,
Have a look at ccache, it might help (if you do not clean the cache every
time a buildworld is done).
As a comparison, my Intel i7 (8 core) CPU, finished the buildworld (-j16) in
~19 minutes (if I remember correctly).
Cheers.
___
Hi Paul,
Have a look at section 6.2.3.2 from
http://www.freebsd.org/doc/handbook/desktop-browsers.html, it works. If you
still have problems, you can report back.
___
freebsd-questions@freebsd.org mailing list
Try booting into single user mode and then:
# mount -u /
# tunefs -L root /dev/ad6s1a
# reboot
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
but it was no good.
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hi,
The problem was that I forgot to load the tws kernel module (for the 3ware
raid controler). After I manually loaded the module, all was fine.
Thx for the reply :)
___
freebsd-questions@freebsd.org mailing list
Hello ppl.
Straight to business.
FreeBSD 7.1-stable
2 hdd. 1 is ad2 and the other is ad6. ad2 is the BSD hdd, and ad6 is just
for data (movies, music, etc). ad2 is a 80GB Samsung P-ata133 and ad6 is a
WD 250GB S-ata2.
While running a process that was trying to create a 25GB file on a 30 GB
ups, sorry. I forgot. I have 1GB ram, 1x module of DDR1 400 MHz (pc3200)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hello again.
About a week ago I cryed on your shoulders but since no one is answering I
am crying again. This time with more accurate data.
My sistem is a P4 2.66 Mhz (sk 478) Intel P4 processor with 1 GB DDR1 ram,
mobo Asus p4p800-x with 2 HDD's. One of them (ad2 ) is a Samsing SpinPoint
of
On Sun, Jun 7, 2009 at 9:38 PM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
Jun 7 21:10:47 da1 kernel: ad6: detached
Jun 7 21:10:47 da1 kernel: g_vfs_done():ad6s1d[READ(offset=86540058624,
length=16384)]error = 6
Jun 7 21:10:47 da1 kernel:
On Sun, Jun 7, 2009 at 11:26 PM, Miroslav Lachman 000.f...@quip.cz wrote:
claudiu vasadi wrote:
On Sun, Jun 7, 2009 at 9:38 PM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
Jun 7 21:10:47 da1 kernel: ad6: detached
Jun 7 21:10:47 da1 kernel: g_vfs_done():ad6s1d[READ(offset
On Mon, Jun 8, 2009 at 9:16 AM, Wojciech Puchar
woj...@wojtek.tensor.gdynia.pl wrote:
the type fdisk /dev/da1 and then compare the sectors values with what dmesg
says
fdisk /dev/ad2 :
*** Working on device /dev/ad2 ***
parameters extracted from in-core disklabel are:
Hi,
I installed FreeBSD8.2 amd64 the other day on a 98GB RAM machine with 24
CPU's (a supermicro 2U server). Due to this alone, I doubt that the
bootloader is limited in any way by the amount of RAM the machine has.
However, I experienced the same behavior on several small machines (normal
PC's)
Then again, one can alway use dhcpd -t to test the configuration file.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
What;s the reason for not being able to load the module ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hi,
So basically you need the following:
1) Set the baud rate and the com interface in BIOS (ex: com1 and baud rate
19200)
2) /boot/loader.conf:
ipmi_load=YES
3) reboot
4)
- use dmesg | grep uart and you will something like this:
uart0: 16550 or compatible port 0x3f8-0x3ff irq 4 flags 0x10 on
feedback is welcome.
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hi,
I've never experienced anything similar but one workaround is to edit the
Makefile: and change the Off to On for the options you need, and the
other way around for the options you don;t need.
Still, the real problem eludes me and that;s the one that needs fixing.
--
Best regards,
Claudiu
to run a script) or UFS
(built-in).
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
PS: would like to see option 2 in PC-BSD too (maybe I'm just melancholic
to have a non-GUI installer :) )
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Tue, Jan 24, 2012 at 7:42 AM, Stas Verberkt lego...@legolasweb.nlwrote:
On Mon, Jan 23, 2012 at 11:24:20PM +0100, claudiu vasadi wrote:
From my point of view, I would like to see 2 major things in bsdinstall:
1) ZFS support
2) an option, to use GUI or text mode installer (similar
did you come to solve it ?
Also, is there a way to make the gif interface persistent over reboots ? I
couldn;t find any so again, a script comes to mind.
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http
is
disabled).
What am I missing here ?
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hello guys,
I have a 7.2-stable Freebsd running on a 2.66 Ghz 478 socket mobo with 1 GB
DDR1 ram.
I added another ip on my rl0 interface, brought it up, everything was fine
(until i screwed it up :( ). I wanted then to remove the alias IP but i
wrote a wrong command (ifconfig rl0 -alias) and
Hello fellas,
my system: FreeBSD [xxx] 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21
15:48:17 UTC 2009
[email]r...@almeida.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC
i386
my problem:
-
#
hello fellas,
can no one give me any ideas ?
I reinstalled libthr.so.3 in the meantime but with no effect.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
hello guys,
is there a way to do make rmconfig for all ports at once ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
one solution I just created would be:
for i in `find /usr/ports/ -type directory -print`; do `cd $i make
rmconfig`;done
but I am wondering if there is a official way. man portsclean did not give
me any options to do it.
Another thing would be to make rmconfig in all dir's that are required to
Hi Greg,
Thanks for the rmconfig-recursive. I did not know about it.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
in the meantime I wrote the following quick script:
#!/bin/sh
# Create a list of all dir's
find /usr/ports/ -depth 2 -type directory -print ports_structure
# for each discovered dir, cd into it and do rmconfig
file=ports_structure
while read dr1
do
cd $dr1;make rmconfig
done$file
very
Hello fellas,
Lately, most compile from ports end up with the following:
/usr/lib/libpthread.so: undefined reference to `__pselect'
followed by the port exit error.
Ex for jdk:
gcc -g -c -o launcher.o launcher.c -m32 -march=i586
-I/usr/ports/java/jdk16/work/hotspot/src/os/bsd/launcher
for others who may have the same issue -
http://forums.freebsd.org/showthread.php?t=10316
you need to replace your base.
PS: after you replace your base distribution and reboot, you will notice
the system will not load and you will have to issue boot GENERIC at the
boot prompt. The workaround
hello ppl,
I was wondering about the following:
After I do make build|install kernel and reboot, the new kernel is
automatically booted but the old one is still on the disk. Therefore, how
does FreeBSD know which one to boot ?
I'm guessing it's writing this info somewhere but I do not know
Hello fellas,
I have a vmware FreeBSD guest with 8 CPU's and 2GB RAM.
I am a bit puzzled of the behaviour the system has when I issue reboot
and/or halt -p now. It shows cpu_reset: stopping other CPUs and stalls
for ~2 minutes.
I have a custom SMP kernel and at the moment I was unable to
Rob,
In the meantime I installed a real freebsd on my work T400 and I am
experiencing the same thing. I believe that at this point I can rule out a
vmware problem.
PS: I also tried hard rebooting after I consider the sync done and I did not
experience any weird behavior. Still is it
Hello fellas,
I was wondering about your update strategy. Do you update your apps as soon
as a new version is available in the ports ? Or do you follow the if it
works, don't touch it strategy ?
I'm guessing portupgrade is your preferred way of doing this hence, do you
also choose -P or -PP ?
Hello guys,
I have a F-BSD 8.0 box running isc-dhcp with the following simple config:
authoritative;
option domain-name-servers 192.168.0.1;
option subnet-mask 255.255.255.0;
default-lease-time 3600;
max-lease-time 86400;
ddns-update-style none;
subnet 192.168.0.0 netmask 255.255.255.0 {
Hi Rob,
No. It did not.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hello fellas,
my system is a 8.0 release with 1 jail.
I have set security.jail.allow_raw_sockets: 1 and I can do ping but
traceroute is still spitting our errors:
dns# traceroute yahoo.com
traceroute: Warning: yahoo.com has multiple addresses; using 72.30.2.43
traceroute: findsaddr: write: No
Hello guys,
my system: 8.0-release i386
my question: Is there a way to manually rescan the com devices ?
reason: yesterday I added a USR external modem on one com port and the
system did not detect it until a reboot. Is this normal ?
btw, is there a way to manually detect newly added hardware ?
Hello fellas,
I have a 8.0-release system with 1 gigabit LAN and 1x 100Mb lan card. They
are working fine until I add a second gigabit lancard. After I insert the
second one, the first gigabit lan card drops to 100Mb. If I remove the
second one, the first one goes back to gigabit. The network
Hi Alex,
In that case you can make maintainer and write an e-mail to that person.
Of course, you can even lend a hand or take-over the port maintenance if the
current maintainer has no time for it. Contributors are always welcomed.
Another option would be to get the source from the skype
Hi,
If you check http://www.freebsd.org/releases/8.1R/hardware.html you will see
that both are supported by the isp(4) driver
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Arek,
man isp shows:
Qlogic 2422
Qlogic 2422 Optical Fibre Channel PCI cards (4 Gigabit)
Qlogic 2432
Qlogic 2432 Optical Fibre Channel PCIe cards (4 Gigabit)
and the hw list shows the same.
What exactly are you trying to say here ?
from the top of my head maybe gamin can replace hald ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Hello fellas,
My system is a 8.0-RELEASE with 6 hdd's. 2 days ago I had some power
failures and 2 disks were affected. These 2 hdd;s are connected to atapci0:
SiI 3512 SATA150 controller port
0xd000-0xd007,0xd100-0xd103,0xd200-0xd207,0xd300-0xd303,0xd400-0xd40f mem
0xfa4a-0xfa4a01ff irq 12 at
How often is it rebooting?
Only after the write failure. If I do read from the disks, everything is
fine
If it's just data disks you could unplug them to see if the machine still
reboots. That would let you know for sure if they really are the problem or
if it's something else.
I could
Hello Steffen,
How did you setup your drives in ZFS ? stripe ?
what bsd version do you have and what platform ?
Do you see this big fluctuation when copying some big file like say and iso
or movie ?
___
freebsd-questions@freebsd.org mailing list
Hello fellas,
I have a 8.0 i386 vmware machine for the sake of testing the following
behavior:
What happened when a secondary hdd cannot be mounted at boot ? From
experience I know the OS drops to single user mode, which I find incredibly
stupid because a non-OS hdd should not stop the OS from
ok, so I will make a secondary mount script that would check and mount any
non-OS-related mp's.
This would include setting all non-OS mp's to noauto in fstab and
creating a secondary script to read fstab, check if all is in order and
finally mount, or exit in error. This way, the OS sticks to
I will write a rc.d script. It seems like the correct way to go.
Manual mount is out of the question :)
I will e-mail my end product
ps: I know it's a dir and not a folder ;)
___
freebsd-questions@freebsd.org mailing list
you can make a hdd image and then play safely with the hdd. if things go
bag, you can just restore the image ;)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
ideas and/or thought are highly welcomed
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr
putting the rules in /etc/defaults/devfs.rules too (and removed them
from /etc/devfs.rules) but didn't work. The behavior is the same.
An I doing something wrong here ?
--
Best regards,
Claudiu Vasadi
___
freebsd-questions@freebsd.org mailing list
http
Hi,
For point no. 1 you can check if the drive is supported @
http://www.freebsd.org/releases/8.1R/hardware.html.
Sorry, no idea about point no. 2
___
freebsd-questions@freebsd.org mailing list
AFAIK,basically no
x86 - x86
and
x64 - x64
Non-basically ... yes but it's a real pain in the @$$ and you will
definitely run in all kinds of trouble.
ip you have KVM access, just put a x64 DVD inside and do a clean install (it
will keep your sanity intact)
I have SiI 3512 SATA150 controller and it works ok
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Bruce,
Can you elaborate on that pls ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
perhaps, but I reached speeds of up to 51MB constant write with it.
what s-ata1 controller would you recommend in this case ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Hello,
First things first, does cups see your printer ? Do you use lpradmin or
the web-interface for adding the printer ?
Second, did you try using http://foo2qpdl.rkkda.com/ for the driver ?
Third, can you post error logs ?
___
61 matches
Mail list logo
