Hi, I have been having problems with getting my usb to work. I have noticed that usb devices are "sometimes" detected not all the time. I have a jumpdrive and a usb printer which will only detect after I have booted and wait for "10 minutes". I know this sounds strange but I have tried this numerous time. If I leave the printer connected while its booting up, it wont detect my printer. If I place the jumpdrive or printer right after logging in, I get "addr 0 should never happen" error using usbdevs. I dont know why this is occuring. But like I said, I have to wait for 10 minutes before I can use it and that doesnt always work.
Im on 5.1 and have made sure usbd_load="YES" is enabled in the rc.conf. I have also added ugen, mass,usb lines in my loader.conf. I have installed gimp-print, ghostscript and cups for my printer. Is this normal for 5.1? Should I upgrade to 5.2? Heres what I have for dmesg. Your help is greatly appreciated. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Wed Mar 10 17:03:15 PST 2004 bsd_guy@:/usr/src/sys/i386/compile/NEWKERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc074e000. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc074e0cc. Preloaded elf module "/boot/kernel/umass.ko" at 0xc074e178. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc074e224. module_register: module uhub/ugen already exists! Module uhub/ugen failed to register: 17 module_register: module uhub/umass already exists! Module uhub/umass failed to register: 17 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 498754388 Hz CPU: AMD-K6(tm) 3D processor (498.75-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 125829120 (120 MB) avail memory = 114339840 (109 MB) K6-family MTRR support enabled (2 registers) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <COMPAQ CARS6S4 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fa040 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <32-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8501 (Apollo MVP4) host to PCI bridge> mem 0x50000000-0x53ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0x1480-0x148f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0x1440-0x145f irq 11 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0x1460-0x147f irq 11 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) sio0: <3COM PCI FaxModem> port 0x1490-0x1497 irq 3 at device 8.0 on pci0 sio0: moving to sio4 sio4: type 16550A pcm0: <Avance Logic ALS4000> port 0x1800-0x187f irq 5 at device 9.0 on pci0 pci0: <simple comms> at device 10.0 (no driver attached) pci0: <multimedia, audio> at device 13.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xe9000-0xebfff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ad0: 9541MB <WDC WD100AA> [19386/16/63] at ata0-master UDMA66 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata0-slave PIO0 acd0: CD-RW <CD-RW BCE2410IM> at ata1-master PIO4 acd1: CDROM <COMPAQ SC-140S> at ata1-slave PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <BTC BCE2410IM A.22> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ata1 bus 0 target 1 lun 0 cd1: <COMPAQ SC-140S SC03> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present da0 at ata0 bus 0 target 1 lun 0 da0: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device da0: 3.300MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ata0:0:1:0): CAM Status: SCSI Status Error (da0:ata0:0:1:0): SCSI Status: Check Condition (da0:ata0:0:1:0): NOT READY asc:3a,0 (da0:ata0:0:1:0): Medium not present (da0:ata0:0:1:0): Unretryable error Opened disk da0 -> 6 (da0:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ata0:0:1:0): CAM Status: SCSI Status Error (da0:ata0:0:1:0): SCSI Status: Check Condition (da0:ata0:0:1:0): NOT READY asc:3a,0 (da0:ata0:0:1:0): Medium not present (da0:ata0:0:1:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ad0s1a ad0: UDMA ICRC error cmd=write fsbn 1366031 of 1366031-1366042 retrying ad0: UDMA ICRC error cmd=write fsbn 1366063 of 1366063-1366094 retrying ad0: UDMA ICRC error cmd=write fsbn 1366063 of 1366063-1366094 retrying __________________________________ Do you Yahoo!? Yahoo! Finance Tax Center - File online. File on time. http://taxes.yahoo.com/filing.html _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"