Re: /dev/apm: device not configured
On Fri, 10 Jan 2003, Matthew Seaman wrote: > Subject: Re: /dev/apm: device not configured > > On Fri, Jan 10, 2003 at 10:35:40AM -0500, John Bleichert wrote: > > > I'm trying to use apmd on my Thinkpad but I can't seem to figure it out. I > > have the support in my kernel: > > > > root:/home/johnnyb > dmesg | grep pm > > intpm0: port 0xefa0-0xefaf irq > > 9 at device 7.3 on pci0 > > intpm0: I/O mapped efa0 > > intpm0: intr IRQ 9 enabled revision 0 > > intpm0: PM I/O mapped ef00 > > > > but as you can see, no /dev/apm0 (which I'm expecting to be in dmesg). If > > I try to use it, it fails: > > > > johnnyb:~ > apm -l > > apm: can't open /dev/apm: Device not configured > > > > You need the apm0 device in your kernel, as well as the specific > device for the particular Power management bus chipset you have: > > % grep pm /var/run/dmesg.boot > apm0: on motherboard > apm0: found APM BIOS v1.2, connected at v1.2 > viapropm0: SMBus I/O base at 0xe800 > viapropm0: port 0xe800-0xe80f at device 17.0 >on pci0 > viapropm0: SMBus revision code 0x0 > > ie. edit the Kernel config to add a 'device apm0' line as follows: > > device apm0at nexus? flags 0x20 # Advanced Power Management > Whoops! I had forgotten to remove 'disable' from that line. Works like a charm now (although my battery is shot ...). Thanks for the pointer - JB # John Bleichert # http://vonbek.dhs.org/latest.jpg To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Re: /dev/apm: device not configured
On Fri, Jan 10, 2003 at 10:35:40AM -0500, John Bleichert wrote: > I'm trying to use apmd on my Thinkpad but I can't seem to figure it out. I > have the support in my kernel: > > root:/home/johnnyb > dmesg | grep pm > intpm0: port 0xefa0-0xefaf irq > 9 at device 7.3 on pci0 > intpm0: I/O mapped efa0 > intpm0: intr IRQ 9 enabled revision 0 > intpm0: PM I/O mapped ef00 > > but as you can see, no /dev/apm0 (which I'm expecting to be in dmesg). If > I try to use it, it fails: > > johnnyb:~ > apm -l > apm: can't open /dev/apm: Device not configured > > Any hints on where I'm going wrong? I have > > apmd_enable="YES" > > in rc.conf and it doesn't seem to error out at boot time, but it doesn't > work and I can't load it from the command line (same error about the > unconfigured device). You need the apm0 device in your kernel, as well as the specific device for the particular Power management bus chipset you have: % grep pm /var/run/dmesg.boot apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 viapropm0: SMBus I/O base at 0xe800 viapropm0: port 0xe800-0xe80f at device 17.0 on pci0 viapropm0: SMBus revision code 0x0 ie. edit the Kernel config to add a 'device apm0' line as follows: device apm0at nexus? flags 0x20 # Advanced Power Management apm0 is in GENERIC, but it's marked 'disable' by default. I think you can enable it using the GENERIC kernel by: ena apm0 in /boot/kernel.conf and userconfig_script_load="YES" in /boot/loader.conf, but as I tend to automatically build myself a custom kernel I have never spent much time investigating. FreeBSD-5.0 might or might not work the same way, and you may find that ACPI is a better alternative for that OS version on some motherboards. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
/dev/apm: device not configured
Hello All I'm trying to use apmd on my Thinkpad but I can't seem to figure it out. I have the support in my kernel: root:/home/johnnyb > dmesg | grep pm intpm0: port 0xefa0-0xefaf irq 9 at device 7.3 on pci0 intpm0: I/O mapped efa0 intpm0: intr IRQ 9 enabled revision 0 intpm0: PM I/O mapped ef00 but as you can see, no /dev/apm0 (which I'm expecting to be in dmesg). If I try to use it, it fails: johnnyb:~ > apm -l apm: can't open /dev/apm: Device not configured Any hints on where I'm going wrong? I have apmd_enable="YES" in rc.conf and it doesn't seem to error out at boot time, but it doesn't work and I can't load it from the command line (same error about the unconfigured device). Any hints on how to get this working appreciated! Thanks - JB # John Bleichert # http://vonbek.dhs.org/latest.jpg To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message