FBSD1 wrote:
Been using burncd since Freebsd 4.0 with 650MB rw/cd's just fine. My local
computer store had a sale on 700MB rw/cd's and I picked up a few. Burncd
gives msg (Failure - read_big illegal request) on these 700MB rw/cd's. The
Freebsd 7.0 man burncd has no info on large sized rw/cd's?
Does burncd need a programming update to handle these newer larger sized
rw/cd's?
What other (built in with the release) program can be used to burn 700 MB
rw/cd's?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Aloha,
HEre is what we did about a month ago when a similar issue came up wit a
couple of us and CDR's.
Julien Cigar wrote:
Same problems for me with atapi CD/DVD drives (READ_BIG timeouts,
etc) .. it works a bit better when dma is turned off, but then
performances are very poor.
On Thu, 2008-08-07 at 14:17 -1000, Al Plant wrote:
N.J. Thomas wrote:
* Snorre D. ?verb? [EMAIL PROTECTED] [2008-08-07 15:29:11+]:
When I boot up with the installation DVD these error messages appear
on the screen.
ad1: FAILURE - READ_DMA status=51READY,DSC,ERROR
error=84ICRC,ABORTED LBA=0055347
ad0: FAILURE - READ_DMA status=51READY,DSC,ERROR
error=84ICRC,ABORTED LBA=0
etc
I got the same exact errors trying to install 7.0-RELEASE on two
different Dell boxes. One was 4 years old, the other was brand new (3
months ago).
Never was able to fix the problem. For the older one, I plugged in an
external DVD drive and installed via that. For the other one, I
installed via a mini-install disk, and then did a minimal network
install.
For the record, they both had SATA drives and the disks worked (and
still work) fine after the OS was installed. It was just copying the
base system off the CD that was causing errors.
Thomas
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
888
Aloha,
I am getting the same errors as you guys with an intermittient
BIG_read one occasionally. I've tried to install FreeeBSD CURRENT 8 and
7 release.
This is on a no name box with a bio board and 1100 cpu. I've had
this on other boxes too and load IDE drives on a box that works with
them and then put them in the box with errors and they work just fine.
Every thing gets recognized normally at install time, but the size
of the IDE drive a Fujutsu 20 gig. shows twice what it should be every time.
Dont know if this has anything to do with it, except if you change
the size in installer it wont load anything.
Maybe one of the top level gurus on the list can help.
Aloha,
The suggestion to put the folloeing worked to clear my DMA error.
In: /boot/loader
Put: hw.ata.ata_dma=0 #disable IDE DMA
This allowed an uninterrupted boot.
--
~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740
+ http://hawaiidakine.com + http://freebsdinfo.org +
+ http://aloha50.net - Supporting - FreeBSD 6.* - 7.* - 8.* +
email: [EMAIL PROTECTED]
All that's really worth doing is what we do for others.- Lewis Carrol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
