Re: CARP & bridge

Hi, Sebastiaan van Erk wrote: So I don't really *NEED* the CARP ip address over the bridge (the static arp works, so I have a working solution, albeit an ugly one; an ARP request generates a reply from every member of the redundant cluster). Just a guess, you could try adding the VIP/32 to th

Re: CARP & bridge

Hi, Nikos Vassiliadis wrote: Sebastiaan van Erk wrote: Thanks for the suggestion. I tried it, but unfortunately the carp device never leaves the INIT state when I put the ip on the bridge. :-( I did find some similar problem here: http://www.freebsd.org/cgi/query-pr.cgi?pr=125816 I just

Re: CARP & bridge

Sebastiaan van Erk wrote: Thanks for the suggestion. I tried it, but unfortunately the carp device never leaves the INIT state when I put the ip on the bridge. :-( I did find some similar problem here: http://www.freebsd.org/cgi/query-pr.cgi?pr=125816 I just noticed that. On -CURRENT carp

Re: CARP & bridge

Hi, Nikos Vassiliadis wrote: Sebastiaan van Erk wrote: Julien Cigar wrote: Maybe you've to do ARP Proxy on one side ? Try to add an ARP entry in the ARP table with arp (arp -s 1.2.3.4 MAC foo) .. Thanks for the suggestion. Ok, static arp works: that is, if I take the carp1 mac address and

Re: CARP & bridge

Sebastiaan van Erk wrote: Hi, Julien Cigar wrote: On Wed, 2009-04-29 at 11:37 +0200, Sebastiaan van Erk wrote: Hi, I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged (via bridge0) to the physical em1 interface, which has a VIP via a carp1 interface: em1: flags=8943 m

Re: CARP & bridge

On Wed, 2009-04-29 at 11:37 +0200, Sebastiaan van Erk wrote: > Hi, > > I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged > (via bridge0) to the physical em1 interface, which has a VIP via a carp1 > interface: > > em1: flags=8943 metric 0 > mtu 1500 > options=98 >

Re: CARP & bridge

Hi, Julien Cigar wrote: On Wed, 2009-04-29 at 11:37 +0200, Sebastiaan van Erk wrote: Hi, I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged (via bridge0) to the physical em1 interface, which has a VIP via a carp1 interface: em1: flags=8943 metric 0 mtu 1500 o

CARP & bridge

Hi, I have a bridged OpenVPN setup where the OpenVPN tap0 driver is bridged (via bridge0) to the physical em1 interface, which has a VIP via a carp1 interface: em1: flags=8943 metric 0 mtu 1500 options=98 ether 00:0c:29:61:2a:55 inet 10.0.80.77 netmask 0xff00 bro