Re: CDRECORD (IDE DRIVE FREEBSD 5.0)
On Sat, Jul 12, 2003 at 08:10:17AM + or thereabouts, Edy Lie wrote: > There is no cd0 device ... It doesn't show up, but it will work. Do `cdrecord -scanbus' to figure out what cdrecord likes to call its drive. -- Josh > > The following is the content of the dmesg output > > > On Sat, 2003-07-12 at 08:05, Mike Maltese wrote: > > Check dmesg for a cd0 device. atapicam worked great with my HP 8100 and > > Plextor CD-R drives. > > > > > Greetings, > > > > > > Is there a way to use cdrecord with an ATAPI cdrom burner? > > > I have enabled the following devices in the kernel but still no luck. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CDRECORD (IDE DRIVE FREEBSD 5.0)
There is no cd0 device ... The following is the content of the dmesg output Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Sat Jul 5 11:44:14 SGT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/PS2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc065f000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc065f26c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1394075456 Hz CPU: AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 Features=0x183f9ff AMD Features=0xc044 real memory = 536805376 (511 MB) avail memory = 514490368 (490 MB) Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00f7760 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: port 0x530-0x537 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xd000-0xd3ff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) isab0: at device 2.0 on pci0 isa0: on isab0 ohci0: mem 0xcfffe000-0xcfffefff irq 5 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xc000-0xcfff irq 11 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xcfffdf80-0xcfffdfff irq 5 at device 15.0 on pci0 xl0: Ethernet address: 00:01:02:83:45:1d miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: port 0xd400-0xd41f irq 11 at device 17.0 on pci0 pcm0: acpi_button0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 14655MB [29777/16/63] at ata0-master UDMA66 ad1: 38172MB [77557/16/63] at ata0-slave UDMA100 acd0: CD-RW at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a On Sat, 2003-07-12 at 08:05, Mike Maltese wrote: > Check dmesg for a cd0 device. atapicam worked great with my HP 8100 and > Plextor CD-R drives. > > - Original Message - > From: "Edy Lie" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, July 12, 2003 1:01 AM > > > > Greetings, > > > > Is there a way to use cdrecord with an ATAPI cdrom burner? > > I have enabled the following devices in the kernel but still no luck. > > > > # SCSI peripherals > > device atapicam > > device scbus # SCSI bus (required) > > device ch # SCSI media changers > > device da # Direct Access (disks) > > device sa # Sequential Access (tape etc) > > device cd # CD > > device pass# Passthrough device (direct SCSI > > access) > > device ses # SCSI Environmental Services (and > > SAF-TE) > > > > Output of dmesg > > acd0: CD-RW at ata1-master PIO4 > > > > And I do not really want to use burncd if i could get cdrecord to work. > > Thanks! > > -- > > In the windoze world, I am limited by the tools that I can use, In Unix, > > I am limited by my own wisdom. > > > > > > ___ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" -- In the windoze world, I am limited by the tools that I can use, In Unix, I am limited by my own wisdom. __
Re: CDRECORD (IDE DRIVE FREEBSD 5.0)
Ahh, you're running 5.0. I haven't ventured into 5.x yet, so I guess I'm not really qualified to answer. My apologies. =) Mike - Original Message - From: "Edy Lie" <[EMAIL PROTECTED]> To: "Mike Maltese" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, July 12, 2003 1:10 AM Subject: CDRECORD (IDE DRIVE FREEBSD 5.0) > There is no cd0 device ... > > The following is the content of the dmesg output > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.1-RELEASE #0: Sat Jul 5 11:44:14 SGT 2003 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/PS2 > Preloaded elf kernel "/boot/kernel/kernel" at 0xc065f000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc065f26c. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 1394075456 Hz > CPU: AMD Athlon(tm) Processor (1394.08-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 > > Features=0x183f9ff > AMD Features=0xc044 > real memory = 536805376 (511 MB) > avail memory = 514490368 (490 MB) > Pentium Pro MTRR support enabled > npx0: on motherboard > npx0: INT 16 interface > acpi0: on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 8 entries at 0xc00f7760 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_cpu0: port 0x530-0x537 on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > agp0: mem 0xd000-0xd3ff at > device 0.0 on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pci1: at device 0.0 (no driver attached) > isab0: at device 2.0 on pci0 > isa0: on isab0 > ohci0: mem 0xcfffe000-0xcfffefff irq 5 at > device 2.2 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: on ohci0 > usb0: USB revision 1.0 > uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1: mem 0xc000-0xcfff irq 11 at > device 2.3 on pci0 > usb1: OHCI version 1.0, legacy support > usb1: on ohci1 > usb1: USB revision 1.0 > uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 3 ports with 3 removable, self powered > atapci0: port 0xff00-0xff0f at device 2.5 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem > 0xcfffdf80-0xcfffdfff irq 5 at device 15.0 on pci0 > xl0: Ethernet address: 00:01:02:83:45:1d > miibus0: on xl0 > xlphy0: <3Com internal media interface> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcm0: port 0xd400-0xd41f irq 11 at device 17.0 on > pci0 > pcm0: > acpi_button0: on acpi0 > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > fdc0: cmd 3 failed at out byte 1 of 3 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > fdc0: cmd 3 failed at out byte 1 of 3 > pmtimer0 on isa0 > fdc0: cannot reserve I/O port range (6 ports) > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa-0xb on > isa0 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > ad0: 14655MB [29777/16/63] at ata0-master UDMA66 > ad1: 38172MB [77557/16/63] at ata0-slave UDMA100 > acd0: CD-RW at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > > On Sat, 2003-07-12 at 08:05, Mike Maltese wrote: > > Check dmesg for a cd0 device. atapicam worked great with my HP 8100 and > > Plextor CD-R drives. > > > > - Original Message - > > From: "Edy Lie" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, July 12, 2003 1:01 AM > > > > > > > Greetings, > > > > > > Is there a way to use cdrecord with an ATAPI cdrom burner? > > > I have enabled the following devices in the kernel but still no luck. > > > > >