IBM / FreeBSD Install problem - more
OK -- at present I cannot get a 6.2 install disk to get anywhere further. Trying FreeSBIE 2.0.1 (aka 6.2) I can get a boot with set hint.acpi.0.disabled=1 set acpi_load=NO boot -v However it doesnt find the bge card nor has it found an fxp card we have tried, so I cant get to dmesg output off the machine What i have seen is that the ServeRAID 8i controller say it is on PCI bus 1:2:0 Nowhere in the boot log is pcib1 or any mention of the physical pci bus 1 Just to test I booted an IBM pizza box x305 with the FreeSBIE disk in the same fashion, and up comes its bge i/f, the boot -v logs show pcib0 , pcib1 , pcib2 along with their associated physical busses. Any help greatly welcomed --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ### This e-mail message has been scanned for Viruses by Bytecraft ### ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FW: IBM / FreeBSD Install problem - more part 2
BTW we have also successfully booted the 'offending box' with FC4 and it all came up ok. This should rule out hardware issues I hope. Is there a way to force a (re)scan of the other PCI busses ?? Or is there a hint.??? line I can add? mjt -Original Message- From: Murray Taylor Sent: Thursday, 19 April 2007 11:26 AM To: FreeBSD Mailing List; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: IBM / FreeBSD Install problem - more OK -- at present I cannot get a 6.2 install disk to get anywhere further. Trying FreeSBIE 2.0.1 (aka 6.2) I can get a boot with set hint.acpi.0.disabled=1 set acpi_load=NO boot -v However it doesnt find the bge card nor has it found an fxp card we have tried, so I cant get to dmesg output off the machine What i have seen is that the ServeRAID 8i controller say it is on PCI bus 1:2:0 Nowhere in the boot log is pcib1 or any mention of the physical pci bus 1 Just to test I booted an IBM pizza box x305 with the FreeSBIE disk in the same fashion, and up comes its bge i/f, the boot -v logs show pcib0 , pcib1 , pcib2 along with their associated physical busses. Any help greatly welcomed --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ### This e-mail message has been scanned for Viruses by Bytecraft ### ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FW: IBM / FreeBSD Install problem - more
OK -- at present I cannot get a 6.2 install disk to get anywhere further. Trying FreeSBIE 2.0.1 (aka 6.2) I can get a boot with set hint.acpi.0.disabled=1 set acpi_load=NO boot -v However it doesnt find the bge card nor has it found an fxp card we have tried, so I cant get to dmesg output off the machine What i have seen is that the ServeRAID 8i controller say it is on PCI bus 1:2:0 Nowhere in the boot log is pcib1 or any mention of the physical pci bus 1 Just to test I booted an IBM pizza box x305 with the FreeSBIE disk in the same fashion, and up comes its bge i/f, the boot -v logs show pcib0 , pcib1 , pcib2 along with their associated physical busses. Any help greatly welcomed --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ### This e-mail message has been scanned for Viruses by Bytecraft ### ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FW: IBM / FreeBSD Install problem - more part 2
BTW we have also successfully booted the 'offending box' with FC4 and it all came up ok. This should rule out hardware issues I hope. Is there a way to force a (re)scan of the other PCI busses ?? Or is there a hint.??? line I can add? mjt -Original Message- From: Murray Taylor Sent: Thursday, 19 April 2007 11:26 AM To: FreeBSD Mailing List; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: IBM / FreeBSD Install problem - more OK -- at present I cannot get a 6.2 install disk to get anywhere further. Trying FreeSBIE 2.0.1 (aka 6.2) I can get a boot with set hint.acpi.0.disabled=1 set acpi_load=NO boot -v However it doesnt find the bge card nor has it found an fxp card we have tried, so I cant get to dmesg output off the machine What i have seen is that the ServeRAID 8i controller say it is on PCI bus 1:2:0 Nowhere in the boot log is pcib1 or any mention of the physical pci bus 1 Just to test I booted an IBM pizza box x305 with the FreeSBIE disk in the same fashion, and up comes its bge i/f, the boot -v logs show pcib0 , pcib1 , pcib2 along with their associated physical busses. Any help greatly welcomed --- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --- ### This e-mail message has been scanned for Viruses by Bytecraft ### ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
