Disregard - I found the 'network_interfaces' line of rc.conf was
lacking lo0. I added it back in and it seems to be booting correctly.
Sorry for the bandwidth!
Keith
While trying to configure ntp, I discovered that my IPv4 loopback
was not being configured. I can manually restart it with 'ifconfig
lo0 add 127.0.0.1', however, it does not survive a reboot.
Here's the output of ipconfig following boot:
rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
options=8VLAN_MTU
inet 192.168.0.100 netmask 0xff00 broadcast 192.168.0.255
ether 00:08:54:dd:65:8d
media: Ethernet autoselect (100baseTX full-duplex)
status: active
plip0: flags=108810POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500
lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
and after manually configuring:
rl0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
options=8VLAN_MTU
inet 192.168.0.100 netmask 0xff00 broadcast 192.168.0.255
ether 00:08:54:dd:65:8d
media: Ethernet autoselect (100baseTX full-duplex)
status: active
plip0: flags=108810POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500
lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff00
What do I need to configure to get it to come up at bootup? Any
thoughts as to why it disappears?
(I'm running FreeBSD 6.2 stable, downloaded and installed about 3 wks ago).
Keith
(newcomer to FreeBSD)
LtCol Keith E. Brandt, MD, MPH
USAF-NASA Aerospace Medicine Liaison Officer
Johnson Space Center, Houston, Texas
[EMAIL PROTECTED]
Goodbye cruel world that was my home-
there's cleaner space out here to roam
Put my feet up on the moons of Mars-
sit back, relax, and count the stars
*This message transmitted with 100% recycled electrons
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]