Re: Problems getting my Huawei 0x140b USB modem to speak to internet

Sorry for typo. 0x140b is the product ID under vendor Huawei (vendor id 0x12d1). Regards, Manish Jain +91-88064-38388 On 30-Jun-13 23:49, Manish Jain wrote: EC156 is what the label on the modem says, which is the response given by AT+GMM. 0x140b is the chipset. Regards, Manish Jain +91

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

If the Huawei modem does not accept AT^U2DIAG=0, then I must say I have given up. That command has worked with all Huawei modems I have seen: E160, E1820, E1750, E173... On 30 June 2013 21:19, Manish Jain wrote: > EC156 is what the label on the modem says, which is the response given by &

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

EC156 is what the label on the modem says, which is the response given by AT+GMM. 0x140b is the chipset. Regards, Manish Jain +91-88064-38388 On 30-Jun-13 22:02, Odhiambo Washington wrote: What model of Huawei is the modem? E-what?? On 30 June 2013 19:23, Manish Jain mailto:bourne.ident

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

What model of Huawei is the modem? E-what?? On 30 June 2013 19:23, Manish Jain wrote: > > Hello Odhiambo/All, > > I seem to have made some progress but final success still eludes me. With > modem symlinked to cuaU0.0, this is what happens is minicom : > > AT^GETPORTMODE &

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

Hello Odhiambo/All, I seem to have made some progress but final success still eludes me. With modem symlinked to cuaU0.0, this is what happens is minicom : AT^GETPORTMODE ^GETPORTMODE:TYPE:EV-DO:Qualcomm,MDM:0,DIAG:1,PCUI:2,CDROM:3 OK AT^SETPORT="A1;1,2,3" COMMAND NOT S

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

Hi Manish, If you have a Windows PC, use putty.exe and point the config to the COM port on which the modem is detected to be attached to. That's how I do it, unfortunately. On 30 June 2013 16:51, Manish Jain wrote: > Hello Odhiambo/All, > > I installed and ran minicom. There

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

Hello Odhiambo/All, I installed and ran minicom. There are 2 devices which are possible candidates as the modem : cuaU0.0 and cuaU0.2 I symlinked modem to each of the 2 devices and ran minicom. With both devices, the AT command returns OK, but AT^U2DIAG=0 returns COMMAND NOT SUPPORT Any

Re: Problems getting my Huawei 0x140b USB modem to speak to internet

ock files) : > > cuaU0.0 > cuaU0.1 > cuaU0.2 > cuau0 > > I am almost certain that cuaU0.0 is the modem. I will try disabling the > the cdrom and then switch mode. > > Thanks again & > Regards > > Manish Jain > > -- > Fro

RE: Problems getting my Huawei 0x140b USB modem to speak to internet

Thanks for your help. But before I attempt disabling the cdrom, I would like to mention that I can already see the following devices (with corresponding .init and .lock files) : cuaU0.0 cuaU0.1 cuaU0.2 cuau0 I am almost certain that cuaU0.0 is the modem. I will try disabling the the cdrom and

Problems getting my Huawei 0x140b USB modem to speak to internet

Hello All, I have a a Huawei USB modem (product id 0x140b) which is connected to my PC. I downloaded and installed Draisberghof's usb_modeswitch. The following are the contents of my /etc/usb_modeswitch.conf : DisableSwitching=0 EnableLogging=1 DefaultVendor=0x12d1 DefaultProduct=0

Re: Release 9.1 and 3G usb Modem

Well, after trying so many things with no luck, i will give a try on ubuntu. I must say all the support that give to me Odhiambo was excellent. Thanks to all of you, thanks Odhiambo for all your effort. Lets see what happen. Saludos / Regards Leonardo Santagostini

Re: Release 9.1 and 3G usb Modem

Hello Matthias, thanks for your response, Odhiambo was helping me with this modem with no luck. Tomorrow we will continuing trying to get this modem running. Thanks all, and thanks Odhiambo for all the support he is giving to get this piece working :) I really apreciate it !!! Saludos

Re: Release 9.1 and 3G usb Modem

El día Wednesday, March 27, 2013 a las 05:09:22PM -0300, Leonardo Santagostini escribió: > Hello Odhiambo . > > The 3G model is Huawei E173 with Movistar Argentina. > > Ive tried but i cant see in windows de USB port to have a serial link :( > > Saludos / Regards > Leonardo Santagostini Hi,

Re: Release 9.1 and 3G usb Modem

On Windows, install the modem drivers and make it usable. Then connect to the port on which it is installed using putty or HyperTerminal. I am hoping you know how to do that. Then type the commands: at^u2diag=0 atz Disconnect modem and connect to FreeBSD. You will see the modem correctly

Re: Release 9.1 and 3G usb Modem

;> Hello all. >> >> I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB >> modem working. >> >> I tried with umodem, u3g but no luck :( >> > > [snip] > > >> ugen7.2: at usbus7 >> ugen7.2: at usbus7 (disconnecte

Re: Release 9.1 and 3G usb Modem

On 27 March 2013 16:29, Leonardo Santagostini wrote: > Hello all. > > I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB > modem working. > > I tried with umodem, u3g but no luck :( > [snip] > ugen7.2: at usbus7 > ugen7.2: at usbus7 (dis

Release 9.1 and 3G usb Modem

Hello all. I have a latitude e6400 with FreeBSD Release 9.1. And i can't get the USB modem working. I tried with umodem, u3g but no luck :( -- Dmesg root@:/root # dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,

Re: PPPOED: reading data of line quality from the A/DSL modem

ens about the settings of the device and especially OH> the line quality, like SNR, dampening et cetera. OH> OH> In my private office, I've setup a FreeBSD server acting like a OH> gateway/router, replacing my oldish non-IPv6 capable ADSL modem/router. OH> Using a secondary NIC con

Re: PPPOED: reading data of line quality from the A/DSL modem

H> the line quality, like SNR, dampening et cetera. OH> OH> In my private office, I've setup a FreeBSD server acting like a OH> gateway/router, replacing my oldish non-IPv6 capable ADSL modem/router. OH> Using a secondary NIC connecting to the ADSL modem via PPPOED, I'd l

PPPOED: reading data of line quality from the A/DSL modem

h non-IPv6 capable ADSL modem/router. Using a secondary NIC connecting to the ADSL modem via PPPOED, I'd like to read some of the important statistsics from the device's chipset like line quality informations. Sometimes our line here go bad and with the setup at the moment, I can not che

Re: modem communication

On Sat, 15 Dec 2012 04:06:54 -0600 (CST), Robert Bonomi wrote: > > From owner-freebsd-questi...@freebsd.org Sat Dec 15 03:27:08 2012 > > Date: Sat, 15 Dec 2012 12:54:44 +0330 > > Subject: modem communication > > From: s m > > To: freebsd-questions@freebsd.org >

Re: modem communication

> From owner-freebsd-questi...@freebsd.org Sat Dec 15 03:27:08 2012 > Date: Sat, 15 Dec 2012 12:54:44 +0330 > Subject: modem communication > From: s m > To: freebsd-questions@freebsd.org > > hello guys, > > please forgive me if my question is not related to this list

modem communication

hello guys, please forgive me if my question is not related to this list but i don't know where i should ask about it. i have a freebsd8.2 and wanna talk my modem by com port. when i connect my modem to com port, everything is ok. for some reasons, i have to communicate with modem,

Re: set connection to a modem

Hello, ppp is used when you want connect to internet via modem. i just want to > config my modem by AT command. > when my ppp.conf file is empty, i can talk to my modem so this config file > do nothing what you want talk to your modem. > > if i want to talk to my modem by a specif

Re: set connection to a modem

On Sun, 2 Dec 2012 09:41:12 +0330, s m wrote: > thanks chris > > ppp is used when you want connect to internet via modem. Basically yes, but it can do more than that. > i just want to > config my modem by AT command. This is _exactly_ what PPP does (among other things). :-

Re: set connection to a modem

On Sun, 2 Dec 2012 12:28:59 +0400 Peter Vereshagin wrote: > Hello. > > 2012/12/02 09:41:12 +0330 s m => To Chris Petrik : > sm> thanks chris > sm> > sm> ppp is used when you want connect to internet via modem. > > What if your (or someone else'

Re: set connection to a modem

Hello. 2012/12/02 09:41:12 +0330 s m => To Chris Petrik : sm> thanks chris sm> sm> ppp is used when you want connect to internet via modem. What if your (or someone else's) ISP use dial-back? This way ppp(8) can't be used because it's not you want to connect to int

Re: set connection to a modem

thanks chris ppp is used when you want connect to internet via modem. i just want to config my modem by AT command. when my ppp.conf file is empty, i can talk to my modem so this config file do nothing what you want talk to your modem. if i want to talk to my modem by a specific speed, which

Re: set connection to a modem

On 12/1/2012 12:38 AM, saeedeh motlagh wrote: > thanks Ilya for your reply. i'm using putty to connect to my modem > and also/dev/cuauo as the config file. i can co > nnect to my modem and it responses to AT commands that you suggest so every > thing is ok. > > > my qu

Re: set connection to a modem

thanks Ilya for your reply. i'm using putty to connect to my modem and also/dev/cuauo as the config file. i can co nnect to my modem and it responses to AT commands that you suggest so every thing is ok. my question is: this connection via /dev/cuau0 can be configured, doesn't it?

Re: set connection to a modem

s m wrote: thanks guys for your replies, now i understand two types of connections are available by modem, dial-in and dial-out. honestly, i should do it for my boss and don't know what he should want exactly to do but i am sure that he has an external serial modem and wants to config it

Re: set connection to a modem

Hello, honestly, i should do it for my boss and don't know what he should want > exactly to do but i am sure that he has an external serial modem and wants > to config it by AT commands via a freebsd system; therefore i think our > connection is dial-out. > 1) Make sure you

Re: set connection to a modem

thanks guys for your replies, now i understand two types of connections are available by modem, dial-in and dial-out. honestly, i should do it for my boss and don't know what he should want exactly to do but i am sure that he has an external serial modem and wants to config it by AT command

Re: set connection to a modem

On Wed, 28 Nov 2012 13:44:18 +0330, s m wrote: > hello guys, > > i want to connect my freebsd system to modem and configure it via my > freebsd. For doing _what_ exactly? I ask because depending on your goal there might be different approaches neccessary: a) dial out to connect to

Fwd: set connection to a modem

> i want to connect my freebsd system to modem and configure it via my > freebsd. i thought that i should change /etc/ttys file to set speed and > other configuration. in order to check if i am right or not, i comment ttyu > line in ttys file and expect the modem got disconnected b

Re: set connection to a modem

El día Wednesday, November 28, 2012 a las 01:44:18PM +0330, s m escribió: > hello guys, > > i want to connect my freebsd system to modem and configure it via my > freebsd. i thought that i should change /etc/ttys file to set speed and > other configuration. in order to check if i

set connection to a modem

hello guys, i want to connect my freebsd system to modem and configure it via my freebsd. i thought that i should change /etc/ttys file to set speed and other configuration. in order to check if i am right or not, i comment ttyu line in ttys file and expect the modem got disconnected but the

Re: How to get Huawei EC1561 USB modem working under FreeBSD, 8.2? Moving on to the next problem :-) -> Flash in Firefox

On 07/29/2012 22:23, Jeff Tipton wrote: On 07/29/2012 21:31, Jerry wrote: On Sun, 29 Jul 2012 23:35:06 +0530 Manish Jain articulated: Thanks for your inputs. I have finally got FreeBSD to speak to the internet. Now I have one more problem before I can live in peace. I am fond of a game hosted

Re: How to get Huawei EC1561 USB modem working under FreeBSD, 8.2? Moving on to the next problem :-) -> Flash in Firefox

On 07/29/2012 21:31, Jerry wrote: On Sun, 29 Jul 2012 23:35:06 +0530 Manish Jain articulated: Thanks for your inputs. I have finally got FreeBSD to speak to the internet. Now I have one more problem before I can live in peace. I am fond of a game hosted via the Discovery channel's website : ht

Re: How to get Huawei EC1561 USB modem working under FreeBSD, 8.2? Moving on to the next problem :-) -> Flash in Firefox

On Sun, 29 Jul 2012 23:35:06 +0530 Manish Jain articulated: > Thanks for your inputs. I have finally got FreeBSD to speak to the > internet. Now I have one more problem before I can live in peace. I > am fond of a game hosted via the Discovery channel's website : > > http://news.discovery.com/hu

Re: How to get Huawei EC1561 USB modem working under FreeBSD, 8.2? Moving on to the next problem :-) -> Flash in Firefox

Hi, Thanks for your inputs. I have finally got FreeBSD to speak to the internet. Now I have one more problem before I can live in peace. I am fond of a game hosted via the Discovery channel's website : http://news.discovery.com/human/games-lumosity-word-bubbles.html The game needs Adobe fla

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

Recommend using a simple teminal program, like 'cu' or 'kermit', try > connecting to each serial port, in succession, and see what happens > when you type the following two lines: > ATE1V1 > ATI0 { that is 'AT', then a capital i, followed by

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

> From: Manish Jain > Date: Thu, 26 Jul 2012 15:37:23 +0530 > Subject: Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2? > > On 25-Jul-12 21:06, Erich Dollansky wrote: > > I did some tinkering to make _some_ progress. My APC UPS is working fine > now un

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

: product HUAWEI E140B0x140b 3G modem This means that your product is supported Is this line in your usbdevs? Now what should my devfs.conf contain ? Currently it contains the following : Mine is empty. Comment all entries out. This might be the problem. link cuaU0.0 modem own

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

On 24.07.2012 10:59, Manish Jain wrote: Jul 23 22:36:15 bourne kernel: ugen0.2: at usbus0 Jul 23 22:36:15 bourne kernel: ugen1.2: at usbus1 Jul 23 22:36:15 bourne kernel: umass0: Mobile, class 0/0, rev 1.10/0.00, addr 2> on usbus1 Jul 23 22:36:15 bourne kernel: umass0: SCSI over Bulk-Only; qu

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

eProtocol = 0x >bMaxPacketSize0 = 0x0040 >idVendor = 0x12d1 >idProduct = 0x140b This is strange. src/sys/dev/usb/usbdevs says this: product HUAWEI E140B0x140b 3G modem This means that your product is supported Is this line in your usbdevs? > Now wh

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

DeviceProtocol = 0x bMaxPacketSize0 = 0x0008 idVendor = 0x051d idProduct = 0x0002 bcdDevice = 0x0006 iManufacturer = 0x0003 iProduct = 0x0001 iSerialNumber = 0x0002 bNumConfigurations = 0x0001 Now what should my devfs.conf contain ? Currently it contains the following : link

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

0x0003 > iProduct = 0x0002 > iSerialNumber = 0x > bNumConfigurations = 0x0001 > > You try to find a solution from the other side of the rope. I think we > better start here first. Yep, I said this already: before there is no modem /dev/ device which belongs

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

Hi, On Tue, 24 Jul 2012 14:29:07 +0530 Manish Jain wrote: > On 23-Jul-12 16:07, Erich Dollansky wrote: > > Hi, > > > > On Monday 23 July 2012 16:46:04 Manish Jain wrote: > >> On 21-Jul-12 19:06, Matthias Apitz wrote: > >>> El día Saturday, July 21, 2012 a las 06:01:11PM +0530, Manish > >>> Jain

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

40b bcdDevice = 0x iManufacturer = 0x0001 iProduct = 0x0002 iSerialNumber = 0x0004 <> bNumConfigurations = 0x0001 I tried setting the device in ppp.conf to cuaU0, cuaU0.1, cuaU0.2 and ugen1.2, but had no success in getting the modem to speak to the internet. Am pas

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2?

Hi, On Monday 23 July 2012 16:46:04 Manish Jain wrote: > On 21-Jul-12 19:06, Matthias Apitz wrote: > > El día Saturday, July 21, 2012 a las 06:01:11PM +0530, Manish Jain escribió: > > > I am still stuck because I can't know the syntax to run usbdump. usbdump man usbdump usbconfig gives you the

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

s part of the system, but only from beginning at some version; Are you sure that /dev/cuaU0.0 belongs to the modem? Please, detach it, look with 'ls -l /dev/cuaU*' if it went away, attach it again. Please show the messages from /var/log/messages on attach. If the /dev/cuaU0.0 device really

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

... > > > Thanks for any tips/help. Which port do I need to install to get usbdump ? First of all, do not top-post. 'usbdump' is part of the system, but only from beginning at some version; Are you sure that /dev/cuaU0.0 belongs to the modem? Please, detach it, look with 

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

ixer0 crw-rw-rw- 1 root wheel 0, 100 Jul 21 17:38 mixer1 crw-rw-rw- 1 root wheel 0, 101 Jul 21 17:38 mixer2 crw-rw-rw- 1 root wheel 0, 102 Jul 21 17:38 mixer3 lrwxr-xr-x 1 root wheel 7 Jul 21 17:38 modem -> cuaU0.0 crw--- 1 root kmem0, 15 Jul 21 17:38

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

Hi, On Friday 20 July 2012 19:25:21 Manish Jain wrote: > > I earlier had a Huawei EC1261-based USB modem which used to connect > smoothly to the internet under FreeBSD 8.2 using the u3g module. For > some reasons, I have had to switch to another provider (MTS) who swapped > th

Re: How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

El día Friday, July 20, 2012 a las 05:55:21PM +0530, Manish Jain escribió: > > Hello all, > > I earlier had a Huawei EC1261-based USB modem which used to connect > smoothly to the internet under FreeBSD 8.2 using the u3g module. For > some reasons, I have had to switch t

How to get Huawei EC1561 USB modem working under FreeBSD 8.2 ?

Hello all, I earlier had a Huawei EC1261-based USB modem which used to connect smoothly to the internet under FreeBSD 8.2 using the u3g module. For some reasons, I have had to switch to another provider (MTS) who swapped the Huawei EC1261-based USB modem with a Huawei EC1561-based USB modem

Huawei E173 modem doesn't work on FreeBSD 9

Hi Folks, I'm failed to access E173 modem on FreeBSD 9.0 using serial port. Yes, I got information from the web that this device is not supported yet by the default driver, and the u3g driver need to be updated. ( http://freebsd.1045724.n5.nabble.com/usb-159919-Patch-for-HUAWEI-E173-u3g-u

Re: driver for cell phone modem

On Thu, 7 Jun 2012, Fbsd8 wrote: Running 9.0 and thinking about changing to this verizon model 551L usb cell phone modem. http://www.verizonwireless.com/b2c/store/controller?\ item=phoneFirst&action=viewPhoneDetail&selectedPhoneId=5632 Your link does not lead to specific informati

Re: driver for cell phone modem

El día Thursday, June 07, 2012 a las 12:00:26PM -0400, Fbsd8 escribió: > Running 9.0 and thinking about changing to this verizon model 551L usb > cell phone modem. > http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewPhoneDetail&selectedPhoneId=563

driver for cell phone modem

Running 9.0 and thinking about changing to this verizon model 551L usb cell phone modem. http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewPhoneDetail&selectedPhoneId=5632 It's a usb plugin cell modem for internet access. Before I go through the purcha

Re: Connect to Clear hub modem

;DHCP" or ifconfig_re0="inet 192.168.15.2 netmask 255.255.255.0" I am only following up here because someday someone may find this thread in the archives. We are talking about the Clear hub modem (which is for wireless but can be connect by ethernet cable). ifconfig_re0="DHCP"

Re: Connect to Clear hub modem

On Thu, 24 May 2012, Lars Eighner wrote: On Wed, 23 May 2012, Warren Block wrote: On Wed, 23 May 2012, Lars Eighner wrote: Whoops! By imaginary, I meant not really on the internet, but in 198.168.x.x block reserved for private netting. This combination of things seems to work in rc.conf:

Re: Connect to Clear hub modem

On Wed, 23 May 2012, Warren Block wrote: On Wed, 23 May 2012, Lars Eighner wrote: Whoops! By imaginary, I meant not really on the internet, but in 198.168.x.x block reserved for private netting. This combination of things seems to work in rc.conf: network_interfaces="lo0 re0" That is norm

Re: Connect to Clear hub modem

On Wed, 23 May 2012, Lars Eighner wrote: Whoops! By imaginary, I meant not really on the internet, but in 198.168.x.x block reserved for private netting. This combination of things seems to work in rc.conf: network_interfaces="lo0 re0" That is normally not needed. ifconfig="DCHP" ifconfig

Re: Connect to Clear hub modem

On Wed, 23 May 2012, Robert Bonomi wrote: From owner-freebsd-questi...@freebsd.org Tue May 22 23:03:03 2012 Date: Tue, 22 May 2012 22:58:39 -0500 (CDT) From: Lars Eighner To: freebsd-questions@freebsd.org Subject: Connect to Clear hub modem This is NOT a wireless question. I am running

Re: Connect to Clear hub modem

> From owner-freebsd-questi...@freebsd.org Tue May 22 23:03:03 2012 > Date: Tue, 22 May 2012 22:58:39 -0500 (CDT) > From: Lars Eighner > To: freebsd-questions@freebsd.org > Subject: Connect to Clear hub modem > > > This is NOT a wireless question. > > I am running

Re: Connect to Clear hub modem

On May 22, 2012, at 8:58 PM, Lars Eighner wrote: > But I don't have a clue what to do from here. Try running 'dhclient'. If that works, add this to /etc/rc.conf: ifconfig_re0="DHCP" > The hub is supposed to have a web page at (imaginary address) 192.168.15.1, > but I haven't been able to rais

Connect to Clear hub modem

This is NOT a wireless question. I am running FreeBSD 8.3-p1. I want to connect to Clear Wireless Internet. I know I cannot do this with a Clear dongle, because Clear uses WiMax which is not supported. Instead I have a Clear hub modem. I want to connect by ethernet to it by wire. I get

Re: modem

On Wed, 4 Apr 2012 15:10:47 -0700 (PDT), tim smith wrote: > > Well, I checked the log for ppp, nothing I could see. > There's not much as I still can't send the modem an AT, so... Could you verify the presence of the cuau* file in /dev? Maybe you can post the essential parts

modem

Well, I checked the log for ppp, nothing I could see. There's not much as I still can't send the modem an AT, so... --- On Tue, 3/4/12, tim smith wrote: > From: tim smith > Subject: modem > To: freebsd-questions@freebsd.org > Date: Tuesday, 3 April, 2012, 8:49 AM >

Re: modem

On Mon, Apr 02, 2012 at 04:49:55PM -0700, tim smith wrote: > > My us robotics serial modem worked without issue on previous freebsd > versions. With 9, user ppp term, I get /dev/cuau0/ device failed to open * If you have built a custom kernel, check that the kernel config includes

Re: modem

On Tue, 3 Apr 2012 09:39:38 +0700, Erich Dollansky wrote: > Hi, > > On Tuesday 03 April 2012 06:49:55 tim smith wrote: > > > > My us robotics serial modem worked without issue on previous freebsd > > versions. With 9, user ppp term, I get /dev/cuau0/ device failed t

Re: modem

Hi, On Tuesday 03 April 2012 06:49:55 tim smith wrote: > > My us robotics serial modem worked without issue on previous freebsd > versions. With 9, user ppp term, I get /dev/cuau0/ device failed to open > > Suggestions? > what does ls /dev say? Is the modem at lea

modem

My us robotics serial modem worked without issue on previous freebsd versions. With 9, user ppp term, I get /dev/cuau0/ device failed to open Suggestions? Tim ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo

Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

>>> > >> put the commands now into your ppp.conf. Put nothing else into it and > >> forget > >> all what was in there before. You can - after it works - add more for > >> debugging. > >> > >> Erich > >>> > >>> Regards > >>

Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

Hi, try set ctsrts on Check the man pages for ppp. You see there several commands and options which might will help you. I really cannot tell why my modem works. It was just a strange trial and error sequence until it started to work. ppp does not detect that there is a carrier. The command

Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

Hi, ok, I saw that I made a mistake. Check what I have added. On Thursday 02 February 2012 20:07:41 Subhasish Chakraborty wrote: > On Thu, Feb 2, 2012 at 4:02 PM, Erich Dollansky < > erichfreebsdl...@ovitrap.com> wrote: > > > Hi, > > > > On Thursday 02 February 2012 16:53:11 Subhasish Chakrabort

Re: help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

Hi, On Thursday 02 February 2012 16:53:11 Subhasish Chakraborty wrote: > > In my my PC-BSD /etc/ppp/ppp.conf file looks like . > can you also try do start ppp manually and enter the commands directly? It seems that your only problem is the connection to the ISP. The rest seems to work. set d

help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

I am new to Free bsd and installed PC-BSD 9 recently in my desktop. Its a dual boot with windows 7 and I use ZTE ac8700 to connect to internet. From windows the Usb stick is working fine ahe driver for windows need phone no #777 , username and password to connect . I tested the device and its worki

enabling usb modem onda msa 190 up on FreeBSD-8.2

   I´m trying to enable my usb modem msa 190 up and I don´t find any driver on   ifconfig just a lo0, plip0 and eth0. This is a 3G broadband mobile connection. Why eth0 is detected if I have just a 3G broadband usb modem Onda msa 190 up in a usb port?    Regards

Re: What USB dialup modem WILL work with 8.2?

> From owner-freebsd-questi...@freebsd.org Fri Aug 26 18:21:24 2011 > Date: Fri, 26 Aug 2011 18:19:13 -0500 (CDT) > From: Lars Eighner > To: Mike Tancsa > Cc: freebsd-questions@freebsd.org > Subject: Re: What USB dialup modem WILL work with 8.2? > > On Fri, 26 Aug

Re: What USB dialup modem WILL work with 8.2?

On Fri, 26 Aug 2011, Mike Tancsa wrote: On 8/26/2011 3:21 PM, Erik Trulsson wrote: So I am asking again: does anyone have a dialup modem of any kind which works correctly on 8.x to provide ppp-on-demand? If so what is it? (As for promises about what *will* 100% guaranteed work, which seems to

Re: What USB dialup modem WILL work with 8.2?

On 8/26/2011 3:21 PM, Erik Trulsson wrote: >> So I am asking again: does anyone have a dialup modem of any kind which >> works correctly on 8.x to provide ppp-on-demand? If so what is it? > (As for promises about what *will* 100% guaranteed work, which seems to > be what you

Re: What USB dialup modem WILL work with 8.2?

On Fri, Aug 26, 2011 at 01:34:03PM -0500, Lars Eighner wrote: > > On the basis of what I now believe was malicious advice, I am out of pocket > for a USB US Robotics 56k dialup modem. However, this device attaches as a > ugen device. I haven't found a way to make ppp on de

Re: What USB dialup modem WILL work with 8.2?

El día Friday, August 26, 2011 a las 01:34:03PM -0500, Lars Eighner escribió: > > On the basis of what I now believe was malicious advice, I am out of pocket > for a USB US Robotics 56k dialup modem. However, this device attaches as a > ugen device. I haven't found a way to m

What USB dialup modem WILL work with 8.2?

On the basis of what I now believe was malicious advice, I am out of pocket for a USB US Robotics 56k dialup modem. However, this device attaches as a ugen device. I haven't found a way to make ppp on demand work with it attached that way. I do not load umass because I am using hplip a

Re: What dialup modem WILL work with 8.x and uart?

> From l...@larseighner.com Tue Aug 23 07:33:23 2011 > Date: Tue, 23 Aug 2011 07:31:50 -0500 (CDT) > From: Lars Eighner > To: Robert Bonomi > Cc: freebsd-questions@freebsd.org > Subject: Re: What dialup modem WILL work with 8.x and uart? > > On Mon, 22 Aug 2011, Robert B

Re: What dialup modem WILL work with 8.x and uart?

On 8/21/2011 12:34 PM, Lars Eighner wrote: > > Since uart in 8.x will not support my PCI 3com hardware modem (as FreeBSD > sio has since 4.x) and my PR is gathering dust, before I buy any more > coaster sets from osdisc.com, it behooves to ask if there are any dialup > modem

Re: What dialup modem WILL work with 8.x and uart?

not helpful. I'm looking for really actually does work. You've been told what actually does work. I'm running 8.2 on several machines -- *with* working serial ports that live directly on the legacy ISA bus. Using only the standard kernel drivers. And doing PPP over those por

Re: What dialup modem WILL work with 8.x and uart?

> From owner-freebsd-questi...@freebsd.org Mon Aug 22 17:55:46 2011 > Date: Mon, 22 Aug 2011 17:53:55 -0500 (CDT) > From: Lars Eighner > To: Robert Bonomi > Cc: luvbea...@larseighner.com, freebsd-questions@freebsd.org > Subject: Re: What dialup modem WILL work with 8.x and ua

Re: What dialup modem WILL work with 8.x and uart?

as. Supporting serial controllers across a PCI bridge takes lots of work. and does *not* 'generalize' well. If I were in your situation, I'e look at a USB serial port and external RS-232 modem. I'll look at anything, but if I have to buy something, I want to know it is ac

RE: First World (Was: What dialup modem WILL work with 8.x and uart?)

You're welcome! FBSD is awesome - LINUX SUX! -Original Message- From: Chris Hill [mailto:ch...@monochrome.org] Sent: Monday, August 22, 2011 5:24 PM To: Gary Gatten Cc: 'Daniel Staal'; freebsd-questions@freebsd.org Subject: RE: First World (Was: What dialup modem WILL wo

RE: First World (Was: What dialup modem WILL work with 8.x and uart?)

On Mon, 22 Aug 2011, Gary Gatten wrote: Interesting analogy. Osama - er, I mean Obama could really use people like you to explain things better to him, 'cause obviously he has NO idea what his various and numerous Czars and advisors are saying. Or maybe they're all barely functional and don'

Re: What dialup modem WILL work with 8.x and uart?

> From owner-freebsd-questi...@freebsd.org Mon Aug 22 05:20:20 2011 > Date: Mon, 22 Aug 2011 05:18:18 -0500 (CDT) > From: Lars Eighner > To: "Conrad J. Sabatier" > Cc: freebsd-questions@freebsd.org > Subject: Re: What dialup modem WILL work with 8.x and uart? >

RE: First World (Was: What dialup modem WILL work with 8.x and uart?)

Interesting analogy. Osama - er, I mean Obama could really use people like you to explain things better to him, 'cause obviously he has NO idea what his various and numerous Czars and advisors are saying. Or maybe they're all barely functional and don't know any better Oh wait, this is a

Re: What dialup modem WILL work with 8.x and uart?

On Mon, 22 Aug 2011, Odhiambo Washington wrote: BTW, Lars, which country do you live in? Still no 3G there?? I live in Texas. It has a greed-based economy, so 3G is practically available only for the very greedy, which is to say rich. I do not speak the language of the very greedy - it is a

Re: First World (Was: What dialup modem WILL work with 8.x and uart?)

On Mon, August 22, 2011 7:19 am, Odhiambo Washington wrote: > I live in some 3rd world country (BTW, how does one become 1st world?) Back in the day, you'd have needed to join NATO... (2nd world, of course, required joining the Warsaw Pact.) These days, I subscribe to the 'soda theory'. At the

Re: What dialup modem WILL work with 8.x and uart?

On Mon, Aug 22, 2011 at 13:18, Lars Eighner wrote: > On Mon, 22 Aug 2011, Conrad J. Sabatier wrote: > > On Sun, 21 Aug 2011 11:34:22 -0500 (CDT) >> Lars Eighner wrote: >> >>> >>> Since uart in 8.x will not support my PCI 3com hardware modem (as >

Re: What dialup modem WILL work with 8.x and uart?

On Mon, 22 Aug 2011, Conrad J. Sabatier wrote: On Sun, 21 Aug 2011 11:34:22 -0500 (CDT) Lars Eighner wrote: Since uart in 8.x will not support my PCI 3com hardware modem (as FreeBSD sio has since 4.x) and my PR is gathering dust, before I buy any more coaster sets from osdisc.com, it

  1   2   3   4   5   6   7   8   >