First off I apologize for all the emails, in the last one I included the
wrong dmesg.
I have a Sony VAIO GRX-570 running FBSD 5.0-RELEASE. Under 4.7 my mouse
was PS/2(psm0, irq 12) and everything worked fine. Not in 5.0, I have no
idea why it doesn't work. Any suggestions would be appreciated.
In examination of my dmesg it's obvious I should disable acpi but that
can't be done, if I do so I get kernel panics on pci0, so that is not an
option.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-RELEASE #0: Sun Feb 9 00:08:52 PST 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/GATE1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0512000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05120a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1590816608 Hz
CPU: Pentium 4 (1590.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536346624 (511 MB)
avail memory = 515477504 (491 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc043ad42 (1000022)
VESA: ATI MOBILITY RADEON 7500
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY B0> on motherboard
Using $PIR table, 7 entries at 0xc00fdf50
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: Y-E DATA USB Floppy Drive, rev 1.10/4.01, addr 2
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x1840-0x185f at device 29.2 on pci0
pcib0: possible interrupts: 9
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass1: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <bridge, PCI-CardBus> at device 5.0 (no driver attached)
pci2: <bridge, PCI-CardBus> at device 5.1 (no driver attached)
pci2: <serial bus, FireWire> at device 5.2 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem
0xe8200000-0xe8200fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:51:a4:b2
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at
device 31.5 on pci0
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ad0: 38154MB <TOSHIBA MK4018GAS> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4
MBREXT Slice 5 on ad0s2:
0000 00 01 c1 ff 0b fe ff ff 3f 00 00 00 bf 64 9c 00
|........?....d..|
[0] f:00 typ:11 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:10249407
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
