Hi,
I have a Intel Desktop Board D946GZIS and im using FreeBSD 6.2
Pre-release. I can't get the NIC to work. Please can someone help me
as this is urgent.
__
Matthew Edwards
Clarotech Consulting (Pty) Ltd.
Tel: +27 21 762-2928
Fax: +27 21 762-7654
Cell:
On Wednesday 06 December 2006 08:38, Matthew Edwards wrote:
Hi,
I have a Intel Desktop Board D946GZIS and im using FreeBSD 6.2
Pre-release. I can't get the NIC to work. Please can someone help me
as this is urgent.
__
Matthew Edwards
Clarotech Consulting
Your onboard card isn't in the supported hardware list (from 5.2 that is) and
your Intel one is, so I guess that explains your problem. I know you don't
want to hear it, but you got no other choice then putting an new network card
in it if you want your network to be stable.
Cheers,
Jorn
On
I'm running 5.2 right now with a VIA EPIA 800 setup. It uses that same
card, vr0, and it seems to work so far, then again I don't have
anything that's much of load for it.
Luke
On Feb 1, 2004, at 3:17 PM, Jorn Argelo wrote:
Your onboard card isn't in the supported hardware list (from 5.2 that
I know there is no support 3c940 nic with FreeBSD 5.1 version. But
it is added later. I look at the CVS. In FreeBSD 5.1 the driver version
of the sk is 1.59 (if_sk.c). But 3c940 support added to sk with version
1.65. So i take the 1.65.
then i put these files to kernel and i compile itl. Now i
]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 01, 2003 8:31 AM
Subject: FreeBSD 5.1 on ASUS P4C800 (onboard NIC problems, 3Com 3C940)
Hello,
I successfully installed FreeBSD 5.1 on my ASUS P4C800 motherboard. The
only remaining problem is that sysinstall did not find any ethernet
device during
Hello,
I successfully installed FreeBSD 5.1 on my ASUS P4C800 motherboard. The
only remaining problem is that sysinstall did not find any ethernet
device during the installation. The onboard NIC is a 3Com 3C940.
What should I exactly do in order to make the system detect this 3Com
3C940 ethernet
I'm having some problems with a RAID setup and the network on a new system.
I haven't found anyone mentioning the problems in the searching I've done
(Google, FreeBSD Website, mailing lists). Hopefully someone can get me
pointed in the right direction or tell me what I'm missing (or fix a bug
Greetings,
I have a Accton 100baseTX nic that uses the RealTek 8129/8139 chipset. The
nic works fine if I plug it into a 10mbit hub but as soon as I plug it into
a switch ( 3Com Baseline 10/100 ) which I use internally for ftp'ing it
starts transferring data ok and then slowly dies. After
At 11:43 3-10-2002 +0200, Nelis Lamprecht wrote:
I have a Accton 100baseTX nic that uses the RealTek 8129/8139 chipset. The
nic works fine if I plug it into a 10mbit hub but as soon as I plug it
into a switch ( 3Com Baseline 10/100 ) which I use internally for ftp'ing
it starts transferring
10 matches
Mail list logo
