Guys, I recently had a little run-in with lightning during a recent thunderstorm - which destroyed my FreeBSD based router (along with a good chunk of my home automation system...)
The machine had a VIA EPIA mainboard with a 933MHz processor. I had two 3Com 3C905C-TX boards installed for the router, and used the local vr interface for monitoring (although it was mostly unused). The machine had a 40GB ATA hard disk, and 128MB of RAM. It performed quite well as a router up until the storm. The machine ran a custom compiled version of FreeBSD 4.8, and I used ipfilter/ipnat for routing. Now, I have a new machine with a Tyan S2425 mainboard, and a 850MHz Pentium III processor. The Tyan board has two Intel 10/100 Pro (fxp) interfaces onboard. The system has an 18GB Ultrawide SCSI drive and Adaptec 29160UW controller - and 256MB of RAM. (it was a workstation before being pressed into service as a router). This machine had just been upgraded to FreeBSD 4.10-REL - and I recently recompiled again to add some IPFILTER options. The trouble is, the new machine routes much slower than the original. Even text based (ssh) traffic appears slower. X apps are always a bit slow, and I could always see the refreshes, but it takes forever now. I replicated as much of the configuration from the original machine as I could (same ipf.rules, ipnat.rules, sysctl.conf, etc). The new machine runs an identical software set (dhcpd, sshd, etc). As far as I know, nothing is consuming an inordinate amount of CPU time. In theory, the new machine is better all around. More RAM, faster CPU, etc - so I am a little confused as to what the problem could be? It seems as though the network adapters could be the issue, but this is a broadband link 3Mb/s peak from comcast - to a 10/100 adapter??? I did enable the downloadable firmware for the internal network interface (link0), but turning it on or off doesn't seem to make a difference. Any ideas? Thanks, -Seth _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"