PowerEdgeTM 1950
Hello guys, I want to know if Dell PowerEdge 1950 works fine on FreeBSD 6.1 i386. (I am interested if network cards are detected and work properly, also if SATA/SAS drive is detected properly. best regards ovidiu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: PowerEdgeTM 1950
--On November 18, 2006 11:57:34 AM +0200 ovidiu ene [EMAIL PROTECTED] wrote: Hello guys, I want to know if Dell PowerEdge 1950 works fine on FreeBSD 6.1 i386. (I am interested if network cards are detected and work properly, also if SATA/SAS drive is detected properly. There are two problems that you must overcome and they require that you rebuild world and kernel. The network card driver has a problem, and the usb driver has a problem. The former causes the network card to become unusable and only a reboot will fix it. The latter prevents you from using the DRAC card (if you ordered one with the 1950.) Both problems can be overcome with newer source code files, but you then have to rebuild world and kernel. And you must save those source code files, because you'll need them every time you have to update world or kernel due to security patches. The two files in question are if_bce.c and ehci.c. if_bce.c http://www.ifdnrg.com/freebsd_broadcom_dell_1950.htm ehci.c v 1.42: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/usb/ehci.c?rev=1.42content-type=text/x-cvsweb-markup Put this version in place in /usr/src/sys/dev/usb, comment out line 766 and rebuild your kernel and the DRAC5 keyboard will start to work. The commit note says MFC after 2 weeks, but this seems to have been missed. I'm going to ping the maintainers and see if I can get it MFCed before 6.2 comes out. Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/
Re: PowerEdgeTM 1950
On Sat, 18 Nov 2006 10:08:03 -0600 Paul Schmehl [EMAIL PROTECTED] wrote: --On November 18, 2006 11:57:34 AM +0200 ovidiu ene [EMAIL PROTECTED] wrote: Hello guys, I want to know if Dell PowerEdge 1950 works fine on FreeBSD 6.1 i386. (I am interested if network cards are detected and work properly, also if SATA/SAS drive is detected properly. There are two problems that you must overcome and they require that you rebuild world and kernel. The network card driver has a problem, and the usb driver has a problem. The former causes the network card to become unusable and only a reboot will fix it. The latter prevents you from using the DRAC card (if you ordered one with the 1950.) Both problems can be overcome with newer source code files, but you then have to rebuild world and kernel. And you must save those source code files, because you'll need them every time you have to update world or kernel due to security patches. Another option is to wait a month or two for 6.2, which already incorporates these fixes. You can try out the 6.2-RC sets, and it will be trivial to upgrade form RC to RELEASE. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]