El Jue 23 Oct 2008, Jeremy Chadwick escribió:
On Thu, Oct 23, 2008 at 09:42:41PM -0700, Martin Alejandro Paredes Sanchez
wrote:
El Jue 16 Oct 2008, Jeremy Chadwick escribió:
If this printer is hooked up on the network (e.g. via Ethernet), I
believe you need to set the lp variable to
- Warren Block [EMAIL PROTECTED] wrote:
On Fri, 17 Oct 2008, [EMAIL PROTECTED] wrote:
I have tried the reccomendations that you guys have suggested with
no luck.
Here is my current printcap.
admincolor|LANIER LD160c RPCS:\
:lp=\
:mx#0:\
El Mar 21 Oct 2008, [EMAIL PROTECTED] escribió:
I took your block above and replaced my block in the printcap, then sent
the exact command above with the same failure. The queue is drained and the
printer's log has a generic message The job was reset. message.
My current printcap file.
El Jue 16 Oct 2008, Jeremy Chadwick escribió:
On Thu, Oct 16, 2008 at 08:36:42PM +, [EMAIL PROTECTED] wrote:
I am trying to setup a Lanier LD160c (admincolor) that has a network
interface. I am new to FreeBSD and tried to follow the handbook. I am
able to print to a HP 5SI
On Thu, Oct 23, 2008 at 09:42:41PM -0700, Martin Alejandro Paredes Sanchez
wrote:
El Jue 16 Oct 2008, Jeremy Chadwick escribió:
On Thu, Oct 16, 2008 at 08:36:42PM +, [EMAIL PROTECTED] wrote:
I am trying to setup a Lanier LD160c (admincolor) that has a network
interface. I am new to
- Warren Block [EMAIL PROTECTED] wrote:
On Fri, 17 Oct 2008, [EMAIL PROTECTED] wrote:
I have tried the reccomendations that you guys have suggested with no luck.
Here is my current printcap.
admincolor|LANIER LD160c RPCS:\
:lp=\
:mx#0:\
I have tried the reccomendations that you guys have suggested with no luck. Is
there a site that I could get some sample filters I could try? I have tried a
few that were in the freebsd corporate guide. This printer will work from
Windows printer spooler and this BSD box can print to a HP
lpr -P admincolor testfile.txt
printcap:
corp-admin|hp|laserjet|Hewlett Packard LaserJet 5Si:\
:lp=\
:sd=/var/spool/output/corp-admin:rm=corp-admin:\
:lf=/var/log/lpd-errs:\
:if=/usr/local/libexec/crlfilter:sh:tr=\f:mx#0:
admincolor|hp|laserjet|LANIER LD160c RPCS:\
If this printer is hooked up on the network (e.g. via Ethernet), I
believe you need to set the lp variable to the hostname or IP address of
the printer, e.g.:
admincolor|hp|laserjet|LANIER LD160c RPCS:\
:lp=192.168.1.100\
:sd=/var/spool/output/admincolor:rm=admincolor:\
On Fri, 17 Oct 2008, [EMAIL PROTECTED] wrote:
I have tried the reccomendations that you guys have suggested with no luck.
Here is my current printcap.
admincolor|LANIER LD160c RPCS:\
:lp=\
:mx#0:\
:sd=/var/spool/output/admincolor:\
:rm=admincolor:\
I am trying to setup a Lanier LD160c (admincolor) that has a network interface.
I am new to FreeBSD and tried to follow the handbook. I am able to print to a
HP 5SI (corp-admin) with no problems. There are no errors in the lpd-errs and
the file is drained from the queue, but the printer does
On Thu, Oct 16, 2008 at 08:36:42PM +, [EMAIL PROTECTED] wrote:
I am trying to setup a Lanier LD160c (admincolor) that has a network
interface. I am new to FreeBSD and tried to follow the handbook. I am able
to print to a HP 5SI (corp-admin) with no problems. There are no errors in
On Thu, 16 Oct 2008, [EMAIL PROTECTED] wrote:
I am trying to setup a Lanier LD160c (admincolor) that has a network
interface. I am new to FreeBSD and tried to follow the handbook. I
am able to print to a HP 5SI (corp-admin) with no problems. There are
no errors in the lpd-errs and the file
13 matches
Mail list logo
