Re: Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
--- Mike Tancsa <[EMAIL PROTECTED]> wrote: > At 10:18 PM 2/6/2007, Nicole Harrington wrote: > > > > > I use RELENG_6 in i386 mode on this MB (two > > > integrated em nics) and it > > > works quite well > > > > Have you tried it with the tune for Diskd > mentioned. > > No, > But I have a box scheduled to be put > together tomorrow and > will give it a try. How much RAM do you have on > them ? > > > ---Mike Ok - I have done more tests and it gets more odd. I was running actually 6.2-PreRelease. To see if something was fixed, I setup a new disk with a fresh install of 6.2-RELEASE amd64. Now even without the sysctl modifications I can reboot the server with: bonnie++ -d /home -u root -s1g Tyan S3992 Mb with a 2210 CPU and 4Gigs Ram. Western Digital Raptor WD740ADFD Error on console: Tons of ones like these zoom by. g_vfs_done():ad4s1a[READ(offset=172627162, Length=626729(] error=6 This is true under P-ATA or S-ATA. Nicole ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
At 10:18 PM 2/6/2007, Nicole Harrington wrote: > I use RELENG_6 in i386 mode on this MB (two > integrated em nics) and it > works quite well Have you tried it with the tune for Diskd mentioned. No, But I have a box scheduled to be put together tomorrow and will give it a try. How much RAM do you have on them ? ---Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
--- Mike Tancsa <[EMAIL PROTECTED]> wrote: > On Tue, 6 Feb 2007 15:26:27 -0800 (PST), in > sentex.lists.freebsd.questions you wrote: > > If I run: bonnie++ -d /home -u root s1g > > The system reboots. > > > > I have tried this is both S-ATA and P-ATA > emulation. > >atapci0: > port > >0xb080-0xb087,0xb000-0xb003,0xac00-0xac07 > >,0xa880-0xa883,0xa800-0xa81f mem > 0xff4fe000-0xff4f > >irq 11 at device 14.0 on pci1 > > > >S-ATA: > >ad4: 70911MB at > >ata2-master SATA150 > > > > OR > >P-ATA: > >ad4: DMA limited to UDMA33, device found non-ATA66 > >cable > >ad4: 70911MB at > >ata2-master UDMA33 > I use RELENG_6 in i386 mode on this MB (two > integrated em nics) and it > works quite well Have you tried it with the tune for Diskd mentioned. > atapci0: > port > 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f > mem 0xff > 3fe000-0xff3f irq 11 at device 14.0 on pci1 > ata2: on atapci0 > ata3: on atapci0 > ata4: on atapci0 > ata5: on atapci0 > atapci1: > port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at > device 2.1 on > pci0 > ata0: on atapci1 > ata1: on atapci1 > > ad4: 76319MB at > ata2-master SATA150 > > # atacontrol list > ATA channel 0: > Master: no device present > Slave: no device present > ATA channel 1: > Master: no device present > Slave: no device present > ATA channel 2: > Master: ad4 Serial ATA II > Slave: no device present > ATA channel 3: > Master: no device present > Slave: no device present > ATA channel 4: > Master: no device present > Slave: no device present > ATA channel 5: > Master: no device present > Slave: no device present > > > However, update the BIOS and make sure you dont use > PATA emulation on > the SATA controller as that doesnt really work. > > ---Mike > > Mike Tancsa, Sentex communications > http://www.sentex.net > Providing Internet Access since 1994 > [EMAIL PROTECTED], (http://www.tancsa.com) Hi Mike Yes, it does work quite well. But not if I use the same tuning parameters used on systems running on Non Serverworks chipsets. (Tyan S2881 or S2882 Board) I use these for supporting many heavy loaded Squid servers. The normal tweaks suggested for Squid, and work well on Non Serverworks chipsets are: /boot/loader.conf kern.ipc.maxsockets=16424 kern.ipc.msgmnb=16384 kern.ipc.msgmni=41 kern.ipc.msgseg=2049 kern.ipc.msgssz=64 kern.ipc.msgtql=2048 OR kern.ipc.msgmnb=8192 kern.ipc.msgmni=40 kern.ipc.msgseg=512 kern.ipc.msgssz=64 kern.ipc.msgtql=1024 However, with any setting of kern.ipc.msgtql (What does it do anyway?) above 64 the server crashes with the Bonnie test. The higher the setting the faster the crash. Nicole ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
On Tue, 6 Feb 2007 15:26:27 -0800 (PST), in sentex.lists.freebsd.questions you wrote: > > If I run: bonnie++ -d /home -u root s1g > The system reboots. > > I have tried this is both S-ATA and P-ATA emulation. >atapci0: port >0xb080-0xb087,0xb000-0xb003,0xac00-0xac07 >,0xa880-0xa883,0xa800-0xa81f mem 0xff4fe000-0xff4f >irq 11 at device 14.0 on pci1 > >S-ATA: >ad4: 70911MB at >ata2-master SATA150 > > OR >P-ATA: >ad4: DMA limited to UDMA33, device found non-ATA66 >cable >ad4: 70911MB at >ata2-master UDMA33 I use RELENG_6 in i386 mode on this MB (two integrated em nics) and it works quite well atapci0: port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f mem 0xff 3fe000-0xff3f irq 11 at device 14.0 on pci1 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 ata5: on atapci0 atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: on atapci1 ata1: on atapci1 ad4: 76319MB at ata2-master SATA150 # atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: no device present Slave: no device present ATA channel 2: Master: ad4 Serial ATA II Slave: no device present ATA channel 3: Master: no device present Slave: no device present ATA channel 4: Master: no device present Slave: no device present ATA channel 5: Master: no device present Slave: no device present However, update the BIOS and make sure you dont use PATA emulation on the SATA controller as that doesnt really work. ---Mike Mike Tancsa, Sentex communications http://www.sentex.net Providing Internet Access since 1994 [EMAIL PROTECTED], (http://www.tancsa.com) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
Hello. I am testing out a new tyan motherboard that uses the next generation of AMD chips and the Serverworks Chipset. It seems that I can reliably crash it with a simple bonnie++ test if I set: /boot/loader.conf - Used for DiskD for Squid kern.ipc.msgtql=2048 I am using FreeBSD 6.1-STABLE amd64. This all works just fine on a non Serverworks Chipset Tyan Board. (literaly I unplug the drive and move it to another system and it works and works in production) If I run: bonnie++ -d /home -u root s1g The system reboots. I have tried this is both S-ATA and P-ATA emulation. Any ideas on why this setting, which works on non Serverworks boards, would make the Serverworks so twitchy? Thanks Nicole atapci0: port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07 ,0xa880-0xa883,0xa800-0xa81f mem 0xff4fe000-0xff4f irq 11 at device 14.0 on pci1 S-ATA: ad4: 70911MB at ata2-master SATA150 OR P-ATA: ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 70911MB at ata2-master UDMA33 /boot/loader.conf kern.ipc.msgtql=2048 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
Hello I am testing out a new tyan motherboard that uses the next generation of AMD chips and the Serverworks Chipset. It seems that I can reliably crash it with a simple bonnie++ test if I set: /boot/loader.conf - Used for DiskD for Squid kern.ipc.msgtql=2048 I am using FreeBSD 6.1-STABLE amd64. This all works just fine on a non Serverworks Chipset Tyan Board. (literaly I unplug the drive and move it to another system and it works and works in production) If I run: bonnie++ -d /home -u root s1g The system reboots. I have tried this is both S-ATA and P-ATA emulation. Any ideas on why this setting, which works on non Serverworks boards, would make the Serverworks so twitchy? Thanks Nicole atapci0: port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07 ,0xa880-0xa883,0xa800-0xa81f mem 0xff4fe000-0xff4f irq 11 at device 14.0 on pci1 S-ATA: ad4: 70911MB at ata2-master SATA150 OR P-ATA: ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 70911MB at ata2-master UDMA33 /boot/loader.conf kern.ipc.msgtql=2048 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
